Zebra Gum Flavors

WORKOUT ANYTIME Featured in Black Enterprise

WORKOUT ANYTIME Featured in Black Enterprise

Zelly Wesson of WORKOUT ANYTIME was recently featured in Black Enterprise. The article discusses Zelly’s opening of his second WORKOUT ANYTIME location. Wesson has been playing professional basketball overseas for the past 15 years, and during his off seasons Wesson has been back managing his WORKOUT ANYTIME locations. Wesson discusses his role in his locations and how he has been successful. 
You can view the full article here. 

Word Nerds Book Study – Chapter 7

By the time you read this, I will be officially back to work.

Yes, you read that correctly. My preplanning started today, and I will have students in my classroom on August 1st.

I’ve been super-busy preparing my classroom and wrapping up summer projects (and lamenting the number of projects that I never even got started). I’m looking forward to sharing more about that in the next couple of weeks. Today, however, I’m excited to participate in the book study of Word Nerds. This book study is being hosted by Sabra at Teaching with a Touch of Twang, and I would definitely encourage you to check out the previous posts at her blog and link up. This is a fantastic book for improving vocabulary instruction.

Chapter 7 – Spreading Vocabulary Wings

This chapter is all about additional classroom activities that can enhance students’ vocabulary understandings. The authors make a few key recommendations.
1. Extend Vocabulary Through Morphology
Encouraging students to analyze affixes and roots can build their confidence as they tackle more multisyllabic words. Start with the most common prefixes (un-, re-, dis-, etc.) and build from there. Once students have experienced a few weeks of studying Greek and Latin roots, they can participate in a “Crystal Ball Word” activity in which they look closely at a word’s morphology to predict its meaning. For example, with the word “transportation,” students can break it up into “trans-,” “port,” and “-ation” and think of all the words that use the same prefix, root, or suffix. They discuss word connections as they make lists of related words, and from this one word, the students in the book were able to think of 41 words that share a similar morpheme! These sorts of word attack strategies are valuable to students as they tackle new vocabulary on their own.
2. Connect Background Knowledge and Facilitate Comprehension
Drawing on the comprehension strategies of making connections, this section highlights how important it is for students to be able to have a variety of experiences with words when they’re trying to make sense of a complex text. For example, as students are attempting to make inferences from the text, they should be explicitly coached to add vocabulary words to make connections based on clues from the text and the student’s background knowledge. This gives students an opportunity to practice using the new vocabulary and adds additional layers of meaning to the words they’re learning. This could be an especially useful practice if you’re trying to connect literature with content vocabulary. The example in the book highlights how some relevant social studies vocabulary (immigrant, culture, destination, etc) could be applied and connected to the book Grandfather’s Journey by Allen Say.
3. Extend Vocabulary Development with Children’s Literature
Picture books, with their shorter texts, less complicated plots, and amazing artwork, can be tremendous resources for teaching reading strategies. The authors highlight why this is also true for vocabulary instruction, and they highlighted several vocabulary-rich children’s books that could be used. Here are a few of my favorites:

Pirate Pete’s Talk Like a Pirate by Kim Kennedy tells the tale of a pirate who is looking to build a crew. But while Pirate Pete talks in “aargh’s” and plank-walking language, the rascals he’s recruiting talk in very sophisticated sentences with eloquent vocabularies. This may be used as a metaphor for how we want to elevate our students’ writing and speaking away from “pirate-talk” and into the more elevated words of the rascals. Students practice revising sentences from pirate sentences into rascal sentences, and after several days of study, students can have a “Pirate Party” where they compete to “Talk Like a Rascal.”

13 Words by Lemony Snicket takes 13 seemingly unrelated words and interweaves them into an amusing story. This could be a template for a student writing assignment which would require students to select 13 unrelated content vocabulary words and tie them into a story in the style of Lemony Snicket. I’m looking forward to trying this activity with my own students.

Baloney (Henry P.) by Jon Scieszka and Lane Smith tells the tale of a boy in space who is late for school and needs to come up with an excuse for his teacher. As he describes his adventures, he inserts a bunch of words that sound like nonsense words (szkola, zimulis, etc.), but they’re actually words from different languages. This is a great book for introducing strategies for teaching context clues.

Max’s Words by Kate Banks is a great story for building word consciousness among students. It tells the tale of a boy who begins collecting words cut out of magazines and newspapers. He eventually realizes he can rearrange the words into stories, and he becomes the envy of his siblings.

The Odious Ogre by Norton Juster tells the tale of an ogre who has an extensive vocabulary that he uses as he terrorizes the town. Given the number of multisyllabic words incorporated in the text, it could be easily incorporated into studies of Greek and Latin roots and morphemes.

Word Nerds has so many great suggestions for easy ways to incorporate vocabulary instruction. These books were just a few of the ones mentioned, so I would recommend reading this chapter for some additional ideas. And be sure to visit Teaching with a Touch of Twang for additional suggestions and insights in this fabulous book.

Back to pre-planning! Thanks for visiting!

Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and/or believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

Eat more and more, do you know chemicals in foods blow you appetite?

In a very real sense, everybody has direct reactions to foods. Direct reactions are reactions caused directly to cells by chemicals in foods. Among the most obvious direct reactions are those caused by alcohol. If you drink alcohol, you are almost certain to experience sedative effects, due to the direct effect of alcohol on your brain cells.

Often, people with Asian heritage react quite negatively to alcohol, and the common belief is that they’re allergic to it. Technically, though, they don’t have an allergy; they have a sensitivity — because this is a direct reaction, which doesn’t involve the immune system. I believe that it’s clearer and more sensible to say simply that Asians often have a food reaction to alcohol, since food reactions include both allergies and sensitivities.

Diet Start

Direct reactions, however, can eventually involve the immune system, because sooner or later the immune system is called in to repair the mess that direct food reactions cause. Therefore, the symptoms of direct reactions can feel much like allergies. Because of this, direct food reactions are sometimes called false food allergies.

Alcohol has obvious direct actions, but most direct food reactions are more subtle. Often, direct reactions occur when chemicals in foods bind with the cells that produce histamine; these cells are called mast cells. When this happens, it can cause the release of histamine. The food chemicals that are most likely to do this are lectins, which are most often found in wheat, peanuts, and beans. Another cause can be certain partial proteins, or peptides, that are found in tomatoes, strawberries, shellfish, pork, chocolate, and eggs.

Other foods that often seem to cause direct food reactions are mustard, pineapple, papaya, buckwheat, and sunflower seeds. Ironically, one patient of mine had terrible digestive symptoms, including severe heartburn, and took large amounts of digestive enzymes to help the problem. However, his enzymes were full of papaya, which he later found he was reactive to. When he stopped taking the digestive aids, his digestion improved immeasurably. Moral of the story: don’t trust common knowledge about what’s healthy — trust your own experiences. Everyone is different.

Other foods that sometimes cause direct reactions are those that contain high levels of natural histamines. Histamines are formed in foods that are allowed to age and ferment. Therefore, histamines are often found in aged cheese, sausage, and salami.

Other foods that can cause direct reactions are those that contain the partial proteins tyramine, phenylethylamine, and octopamine. These chemicals, like histamines, can cause blood vessels to expand and contract, which causes tissue swelling. In the head, blood vessel constriction and expansion can cause migraine headaches. That’s why people who get migraines often shun the foods that are high in these partial proteins, such as wine, aged cheese, citrus fruit and yeast.

Another common foodstuff that often causes direct reactions is the artificial sweetener aspartame. Aspartame is mostly composed of the partial protein, or amino acid, called phenylalanine. In some people, it acts directly on brain cells, causing symptoms such as agitation and depression. In other people, it causes blood vessels to contract and expand, triggering migraines. In most people, though, it causes no reaction at all.

Many people also react to MSG, or monosodium glutamate, with headaches, nausea, dizziness, heart palpitations, and confusion. Others react to various additives, including nitrates, sulphites, and artificial food colours.

Another name for direct food reactions is pharmacologic reactions. That’s a good description, because it implies an important point: foods, like drugs, are chemicals. Not all drugs are good for you — and not all foods are, either.

Now let’s look at the last type of food reaction: immune complex reactions. This type of reaction is not well known. But it should be. It can be a killer.

Foods, like drugs, are chemicals. Not all drugs are good for you, and not all foods are, either.

Speedrun – Hitman: Absolution – Contracts (The First Hit)

After playing through the first Contract (“The First Hit”) properly, I noticed that the only requirements were to kill the target. It didn’t seem to matter if you got spotted or anything else, so I thought – that would be perfect for a Speedrun!

Level: Hitman (Absolution) – Contracts (The First Hit)
Time: 21 seconds
Score: 95,186
Runs: About 4-5

After a couple runs of seeing what the fastest path might be (leaping over the log takes more time than running around imo), I changed to a smaller resolution and turned the graphics down to low settings to help with speed. I don’t know if this is the fastest possible route, I just found it worked well instinctively after a few runs.

Bandicam seems to have some trouble with H:A, the fps keeps popping through, and seems to lag it out a bit. I even tried disabling SLI. I thought it might be my NVIDIA cards, and in the end, I ended up running it on an AMD/ATi HD 6870 even smoother than dual GTX 560Ti’s (this game prefers AMD videocards).

Good luck with it and See You In The Games!

MODERN SWEDISH BEDROOM DESIGNS GO SROP

Although they are all unique, and I noticed that some of the same elements that deserve to be underlined. First of all, all the bedrooms the images below, with large windows, which are usually thin stylish blinds or curtains. On both sides of a king-size bed is a traditional bedside tables, shelves or chairs for the original. The walls are painted mostly white, but here and there, you will find an interesting color interference: some of the rooms are nice backgrounds to illuminate the room. Details of lighting are particularly interesting to observe. Please take a look at this beautiful gallery bedroom and tell us what information you will find interesting.

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

good representation of the concepts

Why Teachers Love Technology

An infographic about “Why Teachers Love Technology” was recently shared with me, and on the heels of yesterday’s post, I felt like now is a good time to share the infographic with you.

What do we Know Infographic
Graphic from OnlineUniversities.com

Do you love technology? I’d love to hear why in the comments section!

10 Reasons to Write with Technology

I’m super excited about the two books that I’m studying this summer as part of my summer series.

Today, I’m diving into the first one entitled When Writing with Technology Matters by Carol Bedard and Charles Fuhrken. 
Rather than giving you a laundry list of all of the ways that you could integrate technology into writing, this book goes in-depth into two specific projects. The first project uses reading and writing to launch moviemaking, and the second project is authoring a visual nonfiction essay. As someone who routinely integrates technology in the classroom, I like this book because it examines lots of angles of these types of projects in great detail. But this book is also good for beginners for that same reason. Rather than offering an overwhelming number of ideas, it breaks down projects into manageable and authentic steps. 
I’ll be examining each of those projects in future posts, but today I want to talk about the first chapter – 10 Reasons Why Writing with Technology Matters.

The opening chapter is filled with research about how technology integration contributes to student learning. They break it down into a list of the following 10 items:

Something that I would add to this list that captures many of the items is the notion of “authenticity.” When you engage students in project-based learning such as making a movie or designing a visual essay, students feel like they have a real purpose. Their work will be viewed by others, and this really motivates students to push a little bit harder. Giving students the freedom, space, and resources to work on something meaningful is a powerful recipe for empowering learners.

I also want to comment on teacher-disposition. A lot of people who visit my classroom think that I have all the answers for technology integration, but let me tell you a secret — I don’t. Almost every day, a student or teacher will ask me a question about how to do something, and I won’t immediately know the answer.

And that’s okay.

Because one of the most important things I can model for my students is the act of troubleshooting and problem solving. If I can’t figure out how to do something, I’ll hop on the internet and poke around until I can find the answer. I think a lot of teachers avoid technology because they’re not confident in their ability to work with it, but you can find a whole lot of information just-in-time as you need it online. Don’t let a lack of confidence divert you from trying some of these projects.

Next week, we’ll dive into Part 1: Reading and Writing to Launch Moviemaking. If you haven’t already picked up a copy of this book, I’d highly recommend it. And it’s not too late to join in the book study! In fact, you’re only 14 pages behind! 🙂

If you are reading this book, I’d love to know what you think. Leave me a note in the comment section!

Happy reading (and writing)!

This post contains affiliate links, but I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CRF, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

Paperless Mission #11: Getting Started with Edmodo

This is the eleventh installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

Mission #11: Get Started with Edmodo

One of the tools that I started using in the classroom this year is Edmodo. If you’re not familiar with it, Edmodo is a learning management system that allows students and teachers to interact online in safe environment. It looks and feels a lot like Facebook but without all of the potential problems Facebook could create — especially for very young users.

1. Create a teacher account and create your group for your class.
Teacher accounts are free, and they’re the first step toward using this in your classroom. Parents and students aren’t able to access Edmodo unless they know the access code that a teacher has given them.

2. Add some content for your students to engage with the first time they use Edmodo. You can ask a question for discussion or take a poll as a good first activity. You’ll want to have something queued to go so that students don’t just start posting randomness. (They may do that anyway at first, but you can at least buy yourself some time to talk about guidelines and procedures for that before they get too carried away.)

3. Invite students by giving them the Group Code. This is unique to your group, and students will need an access code for each group they join with their student account. Joining your group doesn’t give them the power to search for other groups. Similarly, if another teacher at your school is using Edmodo, he or she will also have a Group Code that students can enter and just add the group to their account. It’s pretty easy.

4. Once all of your students have joined the group, lock your group. This will prevent other students from other classes inadvertently joining, and it’s generally a good security measure. You can always unlock the group temporarily later on if you end up getting a new student.

5. Create an assignment. This essentially creates a place for students to turn in their work. Everything that they complete on their iPads gets turned in through the assignments I create on Edmodo. Then I can see which students have turned it in, assign grades, and give feedback. The beauty of this system is that I can grade work as it comes in without worrying about losing something. This is especially helpful on larger assignments where students tend to stagger their completion.

6. Give quizzes. I won’t lie — this is probably one of the most tedious parts about Edmodo from a teaching perspective. You have to manually input all of the questions, and there’s currently not a way for teachers to share their quizzes with one another. But the time you put in on the front end of creating the test is more than made up for on the back end by the immediate grading of the multiple choice, true false, and matching questions. I’ll talk more about Edmodo quizzes in a future post.

7. Set up small groups. You can create multiple small groups within your group, and students can belong to more than one small group. That means that you can have small groups for reading as well as different small groups for research projects in Social Studies, etc.

Preparing Students

My students really did see this as Facebook-lite, so it was important that we created some guidelines as a group. Here are some of the rules we discussed and implemented as a class:
  • Use posts to discuss school-related content only — not to share personal information or “status updates.”
  • Use appropriate school language and grammar, not texting language.
  • Be positive and kind and show good “Netiquette.”
My fabulous media specialist, Sandi at Teacher Technotopia, did a series of lessons with students about “Netiquette” prior to this, which helped a lot. I also moderated the conversations a lot at the beginning. As the teacher, you can delete things that other students post and you can send that student a direct message to let them know that you deleted their post and why you did so. That helped with my class tremendously.  
As a side-note, one of the things I like about Edmodo is that you can send your students direct messages, and they can send you messages, too, but they can’t send direct messages to each other. Anything they post is either public within the group or for the teacher-only. This eliminated some of my concerns about possible cyber-bullying.

How I Used This in My Classroom

Once we got going with Edmodo, I used it constantly. Virtually every test (except math) was done through Edmodo. It was also great for collecting student work, taking polls, and facilitating class discussions. For example, when we were deciding what our class team name would be for field day, I was able to relegate that entire conversation to Edmodo rather than take up valuable class time on it. I also love that students can access Edmodo from any computer or mobile device, so they could keep going on assignments even if they couldn’t take their iPads home. It’s not a perfect platform, but it was really helpful in my move toward a paperless classroom.

Do you use Edmodo in your classroom? I’d love to hear your thoughts about it in the comments section!

WORKOUT ANYTIME on Entrepreneur

WORKOUT ANYTIME on Entrepreneur

WORKOUT ANYTIME Franchisee Chris Gately was recently featured in an article on Entrepreneur. The article titled, “Franchise Players: This Man Signed His Franchise Agreement While Serving in Baghdad” was in celebration of Memorial Day, Entrepreneur was profiling Veterans in Franchising. In this Q&A, Chris gives his insight to running a WORKOUT ANYTIME franchise.

You can view the full article here. 

Taking pills and supplements

Pills and supplements both have their uses, but only in moderation and only as long as strict guidelines are followed.

Over-the-counter (OTC) diet pills

The 1991/2 Weight Loss Practices Survey, sponsored by the US Food and Drug Administration (FDA) and the National Heart, Lung and Blood Institute, found that 5 per cent of women and 2 per cent of men trying to loseweight use diet pills. Products considered by the FDA to be OTC weight- control drugs are primarily those containing the active ingredient phenylpropanolamine (PPA), such as Dexatrim and Acutrim. PPA is available over the counter for weight control in a 75mg controlled-release-dosage form. The medicine should be used in combination with a restricted diet and exercise.

Diet Start

Using diet pills containing PPA will not make a big difference in the rate of weight loss, says Robert Sherman of the FDA’s Office of OTC Drug Evaluation. ‘Even the best studies show only about a half pound (250g) greater weight loss per week using PPA combined with diet and exercise,’ he adds. Sherman cautions that the recommended dosage of these pills should not be exceeded because of the risk of possible adverse effects, such as raised blood pressure and heart palpitations.

Supplements

To rely on taking pills as a way of supplying nutrients is not ideal, for in a perfect world such nutrients should come from our food. But when you consider the quality of some of our food — fruit and vegetables grown in mineral-depleted soil, picked before they have ripened and shipped over vast distances in refrigeration, then put into long-term storage; meat full of hormones; grains stripped of most of their nutritional content — then taking a good multivitamin supplement and possibly extra vitamin C can benefit most people. And while you are trying to balance your blood-sugar levels, reduce body fat and rebuild lean muscle tissue, there are a few supplements that may help.

Key supplements

Magnesium

A fundamentally important mineral that counters insulin resistance.

It is hugely deficient in the Western diet. Consider taking 230-600mg per day, unless you have suffered kidney failure or have a high degree of AV heart block.

Quercetin

A flavonoid with powerful anti-inflammatory properties that helpsto control high insulin levels and inhibit fat production. Take 200-400mg three times a day before meals.

Omega-3 fats

If you don’t eat fish, take 1,000-3,000mg of fish oil daily in capsule form. Vegetarians can use flaxseed oil or crushed flaxseeds instead of fish oil capsules. Try flaxseed oil in salad dressings (or even in smoothies) to ensure you get enough of this health-enhancing fat.

Chromium

A trace element that plays an important role in carbohydratemetabolism and regulating blood-sugar levels. It has proved useful in treating diabetes and shown to be effective in encouraging the body to lose fat, not muscle, when dieting. Take 400-600mcg of chromium picolinate or chromiumpolynicotinate a day.

Lcarnitine

Used extensively by athletes to ensure maximum performance inendurance or aerobic sports. It is also useful for weight loss because it is involved in burning fat in muscle cells. Take 1,000-3,000mg per day.

DIETARY MYTH

Myth: I will get quicker results if I use diet pills.

Fact: there are no shortcuts — no magic pills. Losing weight sensibly and safely requires a multifaceted approach that includes setting reasonable weight-loss goals, changing eating habits and getting adequate exercise. Appetite suppressants (diet pills) may help some people in the short term, but they are not a substitute for adopting healthy eating habits in the long term.

BEDROOM INSPIRATION DESIGN STYLE AWUTAN

Bedroom Inspiration Design

Bedroom Inspiration series today, I decided to post some new designs that room I found in my daily online surfing. Here are the last 5 new chamber design that come in our bedroom inspiration series, now at number 7 If you want more inspiration room, you can start from here and keep the links in these posts.

Bedroom Inspiration Style

Bedroom Inspiration Modif

Bedroom Inspiration Awutan

Bedroom Inspiration Mantrap

The Easiest Way to Implement a Classroom Economy

As my life continues to get crazier, I am constantly looking for ways to simplify and improve the things that I do. This year, for example, I decided to merge Class Dojo with my classroom economy, and so far, it’s going very well! Here are some of the tweaks I made to make this merger work.

My Classroom Economy

I’ve been using a classroom economy since I started teaching, and every year, I make a few tweaks. The basic idea is that every student applies for a class job at the beginning of each term (our terms are 6 weeks long). I’ve previously posted about my classroom jobs here. I display the jobs in my classroom so that we’re constantly reminded who is responsible for what. This year, I’ve used a pocket chart for my classroom jobs (sorry for the blurry photo).

I used to give students $100/week as their salary, or about $20 per day. They’d have weekly and monthly expenses, and then they could use any remaining money to purchase items in our class store. The complete program is detailed in my Classroom Economy Megapack on TpT.

I love the system, but I felt like I wasn’t as consistent as I wanted to be in tracking student behaviors to give fines or bonuses, and there were many Friday afternoons when I was so involved in whatever we were working on that day, that I just didn’t leave enough time for them to shop. 
Meanwhile, I was dabbling with Class Dojo, and I wanted to figure out a way to tie that in as well. If you’re not already familiar, Class Dojo is an online behavior management system that allows you to give and take away points from students. You can create your own categories for points, and you can access the class info from any device — laptop, computer, iPad, iPhone, etc. I liked that portability because I always have one of those devices in my hands, and I could give or take away points without really interrupting what I was doing. 
The solution came for me this year when Class Dojo allowed for the creation of weighted point values! Before, you could only give or take away a single point at a time. Now you can create points on a scale of 1-5 and weight particular behaviors accordingly. This is done in the set-up for behaviors. 
1. Go to Edit Class on your class screen and select “Edit students and behaviors.”


2. Select “Behaviors” and either click on one of the exiting behaviors, or the plus symbol to customize the behaviors.


3. Change the icon (optional), name or rename the behavior, and then click the box to access a pull down menu of point values to weight that item.

And that’s it! You can weight both the positive and negative behaviors according to your needs. Here are the settings I have now for my classroom economy.

I basically divided the $100 weekly salary by 10, and scaled everything else back the same way. Students now get 2 points daily for their salary (10 points per week) and bonuses for different behaviors. The only other positive behavior that I’ve weighted more currently is helping others because I’m really trying to encourage that in my classroom. I’m also going to add a +4 for a class compliment because I like when they do a good job with other adults in the building.

For negative behaviors, I deduct more points for breaking rules outside of my classroom and for disrespecting people or materials. I also now deduct their taxes and rent through Class Dojo, and when they shop, I deduct their points in here. I price everything in multiples of 2, but then I found that I wanted a -5 shopping once they had enough points for some of the larger ticket items in our class store. I dislike that it shows up in the “Needs Work” tab, but I don’t think it’s a problem overall. The parents know what is happening from the descriptors, and we just talk about it in class from the stance of making or spending money. It’s the easiest way to deduct some points without resetting the points entirely.

Since transitioning to this modified system 7 weeks ago, my classroom economy has become more accurate and effective in a fraction of the instructional time. Class Dojo has replaced the clip chart that I used to use, and it helps with some of the accounting. I’m still using the bulk of the resources from my Classroom Economy Megapack, however.

If you’re interested in trying out Class Dojo with the rest of my Classroom Economy Megapack, I’ll be offering the product on sale at half price through Tuesday. It is one of my best sellers, and if you’re looking to change up your classroom management routines or enhance your existing classroom economy, I don’t think you’ll be disappointed. I’ve also discounted the rest of my TpT store 20% to celebrate my return to blogging after a busy start to the school year. Those sale prices will go now through Tuesday, so check them out!

Join the Mailing List! 

Did you know that I have a mailing list so that you’ll never have to miss a post? Use the link at the top right of this page (under Never Miss a Post) to subscribe to my mailing list. You’ll get my posts delivered to your inbox, and you’ll also get access to some extra resources that I’ll be offering to my mailing list only. Given that my PhD work has really cut in to my blogging time this past year, the mailing list is the best way to make sure you see my new content. I promise not to spam you or share your contact information ever. 
Have a great week!

The Incredible Benefits of Grounding – Walking Barefoot on the Ground!

Anyone with small children knows they want to try to ditch their shoes every chance they get – but if you think about how you feel when you are barefoot you will probably realize that you  also feel better when you can walk around barefoot.  Researchers have begun to unravel why being barefoot directly on the ground can in fact be very good for your health!
Your immune system functions well when your body has an adequate supply of electrons, which are easily and naturally obtained by barefoot contact with the Earth.
Research has shown that electrons from the ground have measurable antioxidant effects that can protect your body from inflammation. For hundreds of thousands of years on the planet humans have been in direct contact with the ground without anything that would block the flow of electrons into our bodies.
However in modern time’s pavement, wood, rubber, plastics and many other forms of non-conductive material are between our feet and ground blocking the natural flow of electrons.
The surface of our planet has a negative electrical potential. So when we are in direct contact with it electrons flow to your bod through a process called “grounding”.   Grounding causes positive physiological effects that promote optimum health.
Specific researched benefits include improvements in blood viscosity, heart rate variability, inflammation, cortisol dynamics, sleep, autonomic nervous system (ANS) balance, and reduced effects of stress.
When you connect directly to the ground without any non-conducting material between you and the electron field of the planet there is an improvement in the balance of two sides of your autonomic nervous system:  the sympathetic and parasympathetic nervous systems.
How Shoes May be Impacting Your Health
Materials like metals are excellent conductors of electricity (aka electrons!). The human body is also conductive because it contains a large number of charged ions (called electrolytes) dissolved in water.
Other non-conductive materials, such as plastic and rubber, have very few free or mobile electrons. Traditionally shoes were made of leather, which is a good electrical conductor. However almost all modern shoes contain rubber and plastic which block the flow of electrons from the earth to your body.
The Health Benefits of Grounding
Your immune system body has evolved a method of destroying bacteria and viruses by generating reactive oxygen species (ROS) that are delivered by immune cells. However, these ROS can also cause extensive damage to healthy tissues. ROS are usually positively charged molecules that need to be neutralized immediately to prevent damage to the body after destroying bacteria or viruses.   This is one of the key functions of anti-oxidants which are most important in immune cells to protect them from the ROS they generate!
Anti-oxidants essentially provide a supply of negative charges. Food based antioxidants (such as Vitamins C and E) and anti-oxidants your body produces are critical but a regular supply of electrons grounding can supply them as well.
Evolution facilitated the process of grounding by providing conductive systems within your body that deliver electrons from your feet to all parts of your body. This system has been integral to human physiology for thousands of years. Negative electrons are always available, thanks to the Earth, to prevent the inflammatory process from damaging healthy tissues.
All of this was interrupted when we started to wear shoes with rubber and plastic soles, and no longer slept in direct contact with the ground. Several experiments have proven that a person who is grounded is less stressed and more relaxed.
So have some fun, kick your shoes off and get back to nature!
How to get the benefits of Grounding
Grounding is simple in warmer climates – simply spend time barefoot in direct contact with the earth.   Even better do this on a beach walking along the edge of the water because the flow of negatively charged electrons will be highest here because sea water is an ideal conductor of electrons!    Any amount of time will help but the more you can do it the better!  Even better spend some time laying on the beach or ground with your body in direct contact with the ground without any artificial fabrics, rubber or plastic between your skin and the ground.
For those of us who do not live in warm climates staying grounded during colder months is a bit more challenging but doable! There are actually grounding mats available that plug in to the grounding wire port of a normal 3-prong outlet or a grounding rod (US and Canada only). The earth’s natural electrons flow right up through the ground wire and onto the mat, even if you’re in a high rise. Most mats come with an outlet tester you plug in to the outlet so if your outlet is configured properly.

Georgia Bloggers Blog Hop

It’s time to teach the country about yes ma’am and ya’ll.
Down here in Georgia, we talk with a drawl.
We’re bringing you some freebies as sweet as our tea.
Enter our contest, you might get some things free!


I moved to the Atlanta area eight years ago when my husband decided to go to law school at Emory. It didn’t take long for us to decide that we’d say goodbye to the cold Michigan winters and make Georgia our permanent home. 


We eventually settled in Decatur, a quaint suburb of Atlanta, and we love our little town. Decatur has more festivals than any town I know, and we have a thriving downtown with local shops, concerts, and amazing restaurants. We’re minutes from downtown Atlanta, but we’ve somehow captured a small town feel, and I love it. 

Image of Concerts on the Square in Decatur via visitdecaturga.wordpress.com

This weekend, we’ve paused from our peach picking to give you a taste of Georgia. Twenty-five teachers invite you to take a road trip through our southern state. Hop through our blogs to get freebies.
                                          
This weekend only, I’m giving away my Standards for Mathematical Practice posters from TpT for FREE! You can pick up mine just by clicking here. 



My entire TpT store will also be 20% off this weekend only — June 20-22, so check it out! 

We’d also like to give you a chance to win a bushel basket full of our products. To enter from my page, you just need to follow my blog on Bloglovin’. Already do that? I’d also love for you to follow by email in the link at the top! You can enter once from each person’s blog.

a Rafflecopter giveaway

a Rafflecopter giveaway

So what are you waiting for?! Time’s a wastin’. Go get more free stuff and sign up to win!

An InLinkz Link-up

Fallout 4 – Things The Game Doesn’t Tell You Or Explain To New Players Very Well (in Point Form) [UNDER CONSTRUCTION]

[Note.: This post is ‘LIVE’ and ‘UNDER CONSTRUCTION’, as I continue to add more data and Tips and Example Screenshots to it eventually… I decided to make it available now however, to assist those playing Fallout 4; especially those just starting out – seeing as there was a Steam Sale on (Welcome New Players, heh). I will be adding more Text and Tips and Screenshots and More and this post cannot be considered ‘finalized’ until after I add a ‘Final Footer Image’ to the posting (see some of my other posts for examples of this type of ‘end image’ I put in my posts). Please excuse changes as they occur and temporary mistakes and spelling errors, which may show up should you return to this article while it is under development. Enjoy, however – I hope you find something helpful to you – and have fun in Fallout 4!]

I’m having a ton of fun playing Fallout 4 (as I always say, ‘spending too much time Working On Settlements and ignoring the Main Storyline’) – but I wanted to share a bunch of things that I had to ‘figure out on my own’ in the game, or that I saw others had to (in forums, etc)… There is a kind of Tutorial in the first town in the game, and when you first start out some things are explained, but not much after that (there are some Instruction Screens the first time you Lockpick or Hack A Terminal). Below then, are a handful of concepts, in point form, that I wanted to share; especially for New Players, that the game doesn’t quite cover (or ‘cover enough’):

  • If it says “You lack the requirements to create this item” … and you have the requirements and Perks listed… there can actually be more Component requirements (build materials needed), you have to SCROLL DOWN on the Requirements List (labelled “Requires”) to see them
  • How to Holster your Weapon: Hold R for a moment (on PC, by Default); the same key as you have set for Reload (The game walks you through Aiming and Reloading, but does not seem to cover Holstering)

  • Weapons do not need to be Repaired in Fallout 4, but Power Armor can be damaged and need Repairing at a Power Armor Station, which can be found in Towns and Settlements, and can be Crafted in Workshop Mode as well (they require two Perks/Skills; Armorer (Rank 1) and Local Leader (Rank 2))

  • How to use the VANS Perk so that it shows the ‘Trail to Follow’: (See my article on V.A.N.S. … hold Q for a bit, then put away Pip-Boy right away with TAB and the ‘smoke trail to follow’ should be left behind)
  • You can adjust the Difficulty at any time in the game, even if it is just temporarily (such as if you are ill and can’t fight as well for a while). To change your Difficulty, bring up the Menu while playing (Escape on the PC), then go into the Settings, then into the Gameplay category, changing the Difficulty in there, from Very Easy all the way to Survival Mode (where you have to Sleep, Eat and Drink to stay alive and everything is ultra-hard to kill!). The chance for Legendary Items (and the Legendary Enemies that carry them) increases with the Difficulty – but you can also increase the chance of Legendaries by simply going further South and East, increasing the Difficulty of the Area/Mobs/etc
  • If you TRADE with Dogmeat he can carry Items like all other Companions can (he can also wear Dog Apparel, such as Dog Armor or Dog Collars, if they are found in The Wasteland)
  • You can increase how much Robot Companions can Carry, depending on what parts you build them with (need Automatron DLC to build a Robot that can be your Companion [to ‘accompany you on your Travels’]), watch the “Carry Weight” Amount as you choose parts
  • It is “ok” to Drink ‘the regular Water that is everywhere’, it will still heal you a little; it is just Irradiated and causes some Radiation Exposure. If you have a container such as an Empty Bottle or Milk Bottle, you can also fill these containers at Streams or other bodies of water, to Cook with

Don’t totally ignore Cooking (although you totally can, if you want to). Cooking various icky parts and gooey bits that you find in The Commonwealth not only heals you, most of the Recipes also give you ‘Buffs’ – temporary increases in various Stats – and things like Breathing Underwater or the ability to Carry More… Cook All The Things!

  • The RED Bar in your Health Bar (that is normally GREEN) is the level of Radiation you have acquired. It ‘takes up space’ in your Health Bar, because you cannot be “100% healthy” with Radiation Exposure (it must be removed with RadAway or by a Doctor at a Clinic (for a small fee))
  • The Water Pumps that are built at Settlements give ‘Pure Water’ from underground (it counts as “Purified Water” as it comes from underground where it has been protected/filtered from radiation by the land/ground, similar to how it would be IRL). The Water Pumps can be drunk from directly (like a Water Fountain) or the water can be bottled to drink later (if carrying empty bottles/etc); you don’t have to go all the way back to The Vault to get “Pure Water” [something I was doing in Survival Mode all the time]
  • To Build in a Settlement, go up to the Workshop Bench (always ‘mostly red’ colour, with ‘tools’ on it and usually located Centrally in the Settlement) and Activate it. If you are “Allied with the Settlement” (helping them out or have already helped them out by Completing a Mission for them) it will open Workshop Mode
  • To Scrap in Workshop Mode (to ‘break down an item/weapons/armor into Components you can use for Building Materials), look at it (drop it on the ground if you are carrying it) and hit SCRAP. Walk around a Settlement as soon as you can utilize Workshop Mode, looking for anything that you can Scrap in the area, for use as building materials. The items you Scrap all get ‘broken down’ into Components, which are the building materials themselves, the ‘things you construct other things with’ – everything being stored in the Workshop Bench itself as Inventory

You do not have to Scrap everything ‘manually’/’one at a time’. Just STORE or put Junk Items in the Workshop Inventory (‘trading with the Workshop Bench’, called “Transfer”) and when you want to Build something, the Workbench calculates if you have enough Junk Items to break down into enough Components to build with. It will show what you want to build as GREEN if you have enough estimated building materials to construct the thing you are trying to build. (You may also need certain Perks to build some things, watch the Requirements list)

  • People can ‘steal’ your Power Armor… Raiders can Steal your Power Armor if they come across it in The Wasteland, for example. Settlers can even take Weapons out of nearby Crates/Containers to use, when attacked. To avoid losing your Power Armor, take out the Fusion Core from the Power Armor (“Transfer”) when leaving it, so that it cannot be used by anyone else (it is like ‘taking the keys out of your vehicle’) [NPCs don’t seem to carry/use Fusion Cores on the Armor]. However there have been stories of cases where Settlers will take a Fusion Core out of a container in a Settlement and throw it in a nearby Power Armor Suit and run off with it to Defend the Settlement! Crazy. Although most of the time, the Settler will simply ‘get out’ of your Power Armor after the Settlement is Defended – still, take out Fusion Cores from your Power Armor when you leave it, so that noone (for the most part) can take your Power Armor and you can always find it where you left it.
  • If Items and Containers around you are ‘glowing green’ or looking like they have ‘pip-boy radar on them’, this is a result of the Highlighting from the Scrapper Perk. Any items that you ‘Tag for Searching’ for (eg. when trying to Build something and you didn’t have enough materials, you can “Tag the Components for Search”) will have this GREEN highlighting when the Pip-Boy detects you are close to an Item in the world that is made up of that type of Component (eg. Steel or Plastic).
    To turn this OFF, open the Pip-Boy and go to the Junk page in the Inventory tab, and change to component view by clicking on the Component View button at the bottom (‘C’ on PC).
    Then in this view, go through the Component types and clear the Tag For Search by doing it again on the Component type.
    Then, your ‘Highlighted view’ from the Scrapper Perk is turned off and Items and Containers will not ‘glow green’ around you anymore

  • Speaking of glowing green, unless you want your vision to be green-ish and REALLY BRIGHT every time you crouch (Sneak), don’t get Night Person Rank 2 (Perk). Although the Perk does state that you’ll get “Night Vision when you Sneak”, unless you really want to be able to see really well (and slightly green-ish) in the dark or when you Sneak, hold off on Rank 2, or watch some videos on it first, to see what it looks like. [To some, the Bonuses are worth it – and they don’t mind the way it looks – but personally, I did not like how the Night Vision worked/looked; and since Rank 2 of the Perk and the Vision are tied together (you cannot have one without the other), I personally avoid Rank 2 of the Perk, for now]
  • If you Exit the game (in any way except using ALT+F4), the game will Save your progress as an “Exit Save”. Then, when you start up the game again and Load the Exit Save, it will [should] Delete that Savegame. Note that if you try to Exit the game with the Pip-Boy up, the game cannot Save your progress when you Exit to the Main Menu or the Desktop (be careful in Survival Mode!)

  • Don’t forget to periodically see what Upgrades you can perform on your Weapons (to do more Damage) and Armor (to withstand/absorb more Damage) at Weapons Workbenches and Armor Workbenches. Some Modifications require Perks to ‘know how to do them’; check the Requirements as you go through your Weapons and Armor, to see what you need to make them better
Tip: If you are having trouble killing things, look for ways to improve your Weapons to do more Damage and your Armor to protect you from it – with Modifications at Armor and Weapon Workbenches! Also, the further South/East you go, the harder (higher level) enemies you will face. Tread slowly, go back over areas you have been, to see if anyone has ‘moved in’ and left items/money around. Stick to the ‘NW’ as long as you need to (especially in Survival Mode)…

Speaking of Killing Things, here is how to utilize the Suppressor (the Weapon Modification attachment that actually works really well in the game; but it is more ‘realistic’ than ‘silent’…).

Note: Knowing how to attach a Suppressor to your Gun requires the skill/knowledge, represented by needed the “Gun Nut” Perk of different Ranks (needing Rank 2 for attaching a Suppressor to Pistols and needing Rank 4 for attaching a Suppressor to Rifles)


Here are some Tips for shooting enemies (even groups) with a Suppressor on your gun:

– Shoot from a distance
(the Suppressor reduces sound, but is not “Silent”, just like IRL)

– Headshot for instant kills
(most of the time, aim manually to help this, as the chance to miss is always present in V.A.T.S. With good aiming, that single shot can always be spot-on)

– Stop attacking your enemies for a moment
(they will look around at first of course, but if you don’t move and don’t shoot, they will not know what the hell is going on and if you wait longer, they will eventually even stop looking “thinking it was the wind/rats/etc”)

– Repeat, killing the second enemy, and so on…

Try to remember that if you shoot too frequently, they can hear the direction (suppressors aren’t silent, just like IRL) or can see the puff of smoke or something, because they eventually figure out where you are BUT ONLY if you keep shooting when they are Cautious and looking for you. If you stop shooting when they are looking for the source of the sound/attack, you will be ok. Remember, “low and slow…”.

  • Weapon And Armor Attachments (Modifications made to Weapons and Armor at Workstations for each) can be taken off of Weapons and Armor you find and put on your own favourite pieces/items… As an example, take a ‘Weapon you found on a Raider’ to a Weapons Workbench and choose a lesser attachment/modification than what is present on the item. In this example, if you want a “Hardened Receiver” that is on a Weapon you found, choose one further ‘up’ the List of Modifications, such as a “Standard Receiver” and ‘build’ it on the Weapon you found; then you will be changing the Attachment and receive the “Hardened Receiver” Modification in the form of a small box ‘kit’ in your Inventory that you can then use on your own Weapon! Simply go back to your favourite gun at the same Weapons Workbench and see if you can put the new Weapon Mod (“the Hardened Receiver” with higher damage output) on your favourite gun
  • If people around you are glowing (looking, for example, red or green) and look like they have ‘lines through them’ as well, you may have a helmet of Power Armor that has the “Targeting HUD (Heads-Up Display)” on it as an Attachment/Modification. This effect is visible even if it is only active on a Companion’s Power Armor Helmet. Simply remove or change the Targeting HUD Modification of the Helmet at any Power Armor Station, to disable the effect.

[……I am going to add to this post, as I remember things that I already have forgotten and can’t seem to bring back up at the moment to throw in here; but I still hope someone finds these concepts and Tips helpful – especially new players to the game….. Have fun with Fallout 4!]

Workout Anytime Featured in Franchise Times

Workout Anytime was recently featured in the Franchise Timesin an article titled, “Nest Eggs: Done right, a rollover of retirement funds can be smart option”.

The article is a trend piece on franchisees using their 401(k) to purchase their business. John Heifner, Workout Anytime franchisee, gives great insight into how he went about purchasing his Workout Anytime with the use of his 401(k). He went on to say “Starting our third year, I can start thinking about funding a retirement again instead of keeping my money more fluid for cash flow.”

Click HERE for the full article or begin reading below:

Nest Eggs

Done right, a rollover of retirement funds can be smart option

By: Jeffrey McKinney
More franchisees are using their 401(k) retirement funds to finance the purchase of a franchise. Who should consider the move? Experts explain the do’s and don’ts, including warnings about strict IRS rules.

Jeremy Turner’s decision to pretty much tap out his retirement funds to buy a Lawn Doctor franchise was very clear: He calls it the best option he had after banks would not lend him the money.
Turner withdrew $70,000 from his 401(k) plan and another $30,000 he and his wife had in savings to start the lawn care business in St. Louis in 2010. Turner says he discovered companies charge around $5,000 to help complete the financing process. “I would not suggest that someone try to do this on their own because of tax and other risks involved,” he says.

Hitman: Absolution – First Impressions and Screenshots

I finally picked up the latest iteration of the Hitman Series, Hitman: Absolution, starring Agent 47 as the main anti-hero, id est killing the bad guys but never quite [arguably] becoming one of them. Differing from the last couple of Hitman publications, Absolution has an overarching story, connections being made in a chronological manner throughout the various stages and settings. Characters are introduced and developed via cutscenes, as the plot is pushed further by your completing the next mission for a feeling of engagement in the storyline.

I personally liked this approach, as opposed to the last couple of Hitman games, which seemed like mostly ‘replays’ of old missions from previous games (which in and of itself, isn’t a bad thing). While there were similar settings, such as a Chinese Market Square, they were sufficiently changed enough – especially with the graphical improvements and new gameplay interface – to seem varied enough to be enjoyable. There were even updated versions of [personal] ‘old favorites’ that I waited excitedly for (such as a ‘Hotel’ stage). Slightly more varied than the old versions, if you include the new “Instinct” game mechanic, these levels felt ‘fresh’, even if they weren’t new.

The “Instinct” game mechanic seems like an effort to simplify the game, making it easier for newcomers and those who had trouble with the complexity and scope of the previous Hitman games. Indeed, I remember reading a lot over the years of people saying the Hitman games were “too big” or “too complex” and that it didn’t help the player much at all, as far as where to go and what to do. It “plopped you down in a large area with just a map”, they felt. Of course, that was the draw for all of the other people, the complexity and seeming openness of the game was enjoyed, where you had to figure out everything yourself. You could decide what to skip and what to do and could decide for yourself how to do it. The new “Instinct” mechanic of Absolution doesn’t take too much away from this (you can turn it ‘off’ if desired) and it actually adds to the cinematic feel of the game by taking the ‘player out of playing’, so to speak, which results in more of a feeling that you are ‘playing Agent 47’, guiding him (and using his innate abilities) through the game, as opposed to ‘actually being Agent 47’ and figuring everything out yourself heavy-handedly. I suspect this more objective approach has already been a point of contention since the game was released.

An example of Hitman: Absolution’s new ‘Hitman Instinct’ game mechanic, showing how Agent47 can ‘sense’ enemies in and around the nearby area and estimates where they may be heading.

When utilizing Agent 47’s ‘Instinct’, the game shows where 47 ‘senses’ there are enemies and where they are and shows you on the screen with outlined shapes. It even shows where 47 ‘calculates’ enemies will be moving to, showing you their intended path with a line of flame and where they will stand still with a larger lick of fire. This is where the adrenalin-dipped decision making and primal ‘danger’ awareness kicks in during the game, as a player can choose to set up an engagement with an enemy, or stealthily avoid these paths and points.

For those who do not like or want the new game mechanic at all, it can be turned off, mainly by choosing a higher difficulty level. There are five to choose from and higher difficulties result in more ‘sensitive’ or ‘aware’ enemies, tougher enemies (wearing more body armor one assumes) and more of them. For those who are new to the game or having trouble with it, the difficulty can be lowered as well, with less enemies, enemies with less skill (not as good at aiming) and less awareness (having a bit more ‘tunnel-vision’) allowing you to sneak around them easier. The option to have this game mechanic off or on, at the players choice, is nice and was no doubt included to appease those who would not like it’s hints and guidance. New players (those talking about the games’ difficulty in the past) can have it on and still enjoy the action and storyline as well. It feels like an ‘attempt to please everybody’ – and I assume it will work well in that regard. (I haven’t read any Reviews of the game (to avoid exposure to the material within) before I purchased it, but I assume that once I indulge in others’ opinions, I will see much disagreement on that last sentence).

View of a hotel cleaning supply room from an air ventilation shaft. Click to see Full Size

The game itself felt atmospheric and cinematic. The music changed as action waxed and waned. Enemies ignored or chased you around winding levels that you had to discover and remember. The graphics were spectacular, with detailed textures, dark and gritty lighting and shading. The core Hitman gameplay was there – even if it wasn’t there for very long. This game felt very short to me. Perhaps it was the somewhat simple Television Movie Special plot, perhaps it was the number of missions (although they were split up into sections). Perhaps it was merely enjoying it so much that I wanted more, but just during the course of writing this article off and on, I have completed the game in it’s storyline entirety (not counting Challenges and Item Collection) in just over 20 hours. That doesn’t seem very long, but I suppose it is to be expected in a game that is more like “Max Payne” and less like “Skyrim” (more Action and less RPG). You could keep playing after finishing the main story, select past levels and retry them, doing them ‘cleaner’ for a better score or achievement, or look around and discover new weapons and pathways, or just redo any level you wanted to for fun.

An example of how the levels are split up into sections and how you can select past levels to replay them.
An example of the updated game engine, with higher-detailed character models, textures and environments.
Click to see Full Size

Other than the copy-pasted ‘general population’ mannequin-people utilized in larger crowds (used understandably to keep memory/resource usage of the game down of course – all of the ‘main’ NPCs have good detail to them), I personally liked the attention  paid to smaller details, such as the amount of debris scattered around the levels – things like cups, papers and garbage, all part of the gritty ‘lived-in-ness’ of the environment, adding to the realism. It’s nice to see games that pay more attention to the surroundings/settings these days, as opposed to the stark, clean-floor environments in games of yesteryear.

Overall, Hitman: Absolution was very enjoyable. It was great fun to figure out steps and schemes for the various areas and carry them out with cold calculation. I laughed out loud a few times and grit my teeth in anger at the more difficult parts, playing them over and over again, trying to figure out new ways to accomplish the objectives and complete the contracts. Despite feeling shorter (perhaps just because it was so enjoyable) and despite some changes that others might not entirely like, I still suggest trying it (especially if you are a fan of the previous games in the Hitman series). I personally had a lot of fun with the game – and isn’t that the most important thing?

Have fun with Absolution and See You In The Games!

RELAXING BATHROOM MODERN DECORATION

Relaxation can be achieved in a variety of ways. If the shape of the tub that makes the difference, decorative items or inspire the idea that you can see, these bathrooms all have something in common with relaxation. Some interiors are rich in green arrangements, which add freshness and energy of the place. He also tried to find some bathroom designs that have a special color.

LUXURY RELAXING BATHROOM DESIGN

LUXURY RELAXING BATHROOM DESIGN

We realized that the wood has a great influence on modern decoration, the first picture, for example, because it adds authenticity and personality. The windows are also of great importance because they have a great influence on the aesthetics and atmosphere of a room. Diagonal windows give a dramatic touch and are welcome if there is a nearby slope. Most of the bathrooms in the following images are modern, but also you will find some classic elements that blend well with contemporary arrangements.

LUXURY RELAXING BATHROOM LUXURY DESIGN

RELAXING BATHROOM LUXURY DESIGN

LUXURY RELAXING BATHROOM DESIGN

LUXURY RELAXING BATHROOM DESIGN

LUXURY RELAXING BATHROOM GREEN DESIGN

LUXURY RELAXING BATHROOM GREEN DESIGN

LUXURY RELAXING BATHROOM STYLE

LUXURY RELAXING BATHROOM STYLE

Workout Anytime in Louisville Business First Inbox

Workout Anytime in Louisville Business First

Workout Anytime of Louisville, KY was recently in Louisville Business First. The article features Louisville resident, Bobby Paisley. Paisley brought Workout Anytime to the Louisville market, and has been with the brand for four years now. Bobby has been able to successful build the brand and will be opening his third Louisville location this March. Along with fellow fraternity brother from WKU and Regional Developer Greg Parker, they have built the brand in Louisville and surrounding areas in Kentucky.
You can read the full article here. 

WORKOUT ANYTIME in Albuquerque Business First

WORKOUT ANYTIME in Albuquerque Business First

WORKOUT ANYTIME VP of Development Randy Trotter was recently featured in the Albuquerque Business First. The article begins with information about WORKOUT ANYTIME and why Albuquerque is ripe for the concept to enter the market and grow. Randy is quoted about the franchise opportunity and they provide information about financing needed to open a location. The article goes on to touch on the real estate footprint. The article is ended by providing Randy’s cell phone number for anyone interested in a franchise.
You can view the full article here.
 

Limitations of Organization Capacity Assessment (OCA) tools

Since April of 2002 I have been involved with Strategic Planning, Restructuring, Re-engineering, Organization Revival, Organization Analysis, Organization Capacity Assessment and Organization Development projects across sectors and boarders. Most of the tools that ate used for this purpose can be traced back to a few general tools which were made famous in the latter part of the twentieth century. Increasingly I have felt the need to further customize these tools in a way that they become more relevant to the current context. This customization has been happening in the past and continues at a faster rate at present.

The single biggest reason that I attribute for this need is that; today we live in a technological age which has some peculiar characteristics. The characteristics are that we need to innovate and improve not only our products but also how we do things inside the organization at a faster rate. This is nothing new; most of the thought leaders of our time have made big bucks selling this message repackaged with additional jargon. These characteristics currently affect most of the knowledge based industries. However as time goes by their affect on every organization be it government, private or development sector will grow exponentially.

As mentioned above since we have to improve the way we do things inside an organization we run into the human dimension of things. We are also aware of the “change management” that needs to happen inside the organization to facilitate the “keeping up” with the changes that drive our organizations toward bigger and better things. However we don not consider that some of the changes required may be limited by the knowledge / intellectual capacity of the staff (here staff include owner directors, CEOs, CFOs, CIOs, and CKOs). In some organizations we may have staff that has reached the limit of their intellectual prowess. When an organization reaches this level it is said to have arrived at the door step of “mediocracy”

The current tools that most of our contemporary consultants use for organizational diagnosis will not help identify this issue of “mediocracy”. However there are some characteristics that are peculiar to these organizations where they have reached the glass ceiling of intellectual limitation / mediocracy. Let me take a few cases from assignment that I have done in the past and elaborate this.

The 1st example that I would like to take is an ICT company that started over 25 years ago. The organization has been fairly successful in keeping up with the changes in the ICT technology; and has been making above industry average, earnings per share. However in the early 21st century there was a need to re-strategize to keep up with the faster pace of change in the ICT technological environment. I was invited to develop a new strategic plan for this organization. By this time I had already identified some of the key markers of an organization that has reached its pinnacle based on the intellectual capacity of its staff; and I was able to identify them in this organization during my first meeting with the senior management of the organization. I suggested to the Managing Director who invited me that the organization not only needed a new strategic plan but it also needed a corporate renewal plan and a VRS. This suggestion was not looked at favorably and I was asked only to develop a strategic plan.

The markers that I identified were:

1. The organization starts adding parallel value chains to the existing organization structure.

2. Organization does not move forward or backwards in the value chain

3. The organization does not spawn new businesses that are “stars” / neither are they known for any innovation (other than the innovation of some of the principles / 3rd party brands that they may represent)

4. History of young star performers leaving the organization on a continuing basis

5. Boasting of people (the young starts) who have left the organization and gone to achieve great things as been trained at this organization.

6. Long serving staff in a particular discipline / technology / expertise

7. Some staff that leave the organization after a few year (not the stars) join the organization again as a manager or a senior in the same field of expertise

8. Staff talk of the same obstacles that they face every year (one years experience repeated over many years) as opposed to innovating / re-engineering / work-a-rounds to overcome obstacles

9. Large number of managers based on technical areas as opposed to value addition

10. Staff do not take up higher education or professional development

11. Average age of staff moves parallel to the age of the organization

The above 11 markers as identified by me is a clear indication that the organization has run out of ideas and the incumbent staff are not able to get the organization out of the hole that it has dug for itself. They need fresh blood and a new playing field to continue being profitable. In its current state it will just survive but never reach its former glory / heyday it enjoyed in the beginning of its existence.

The 2nd example that I would like to take is a research organization set up to do applied economic research. This organization too has been in existence for over 30 years and had enjoyed considerable success in the early part of its existence. This organization too displayed the following common markers as identified by me earlier.

They were:

  1. Long serving staff in a particular discipline / technology / expertise
  2. History of young star performers leave the organization on a continuing basis
  3. Boasting of people (the young starts) who have left the organization and gone to achieve great things as been trained at this organization.
  4. Some staff that leave the organization after a few year (not the stars) join the organization again as a manager or a senior in the same field of expertise
  5. Staff talk of the same obstacles that they face every year (one years experience repeated over many years) as opposed to innovating / re-engineering / work-a-rounds to overcome obstacles
  6. Large number of managers based on technical areas as opposed to value addition
  7. Average age of staff moves parallel to the age of the organization

In addition they displayed the following:

  1. Doing (research) work in traditional / theoretical / safe areas as opposed to doing applied / non traditional / contentious issues based research (Not competing in your space as mentioned in the mission but trying to compete in the space that you perceive to be good at / running back to mama so to speak; relying on your academic training as apposed to innovation)
  2. Contempt / arrogance towards younger organizations (doing applied research) and relying on the age of the organization and past performance as a mark of value (of research) as apposed to quality, (rigor), and relevance to current context.

The above may be considered anecdotal by some; but over the past 8 years across 19 countries I have come across these markers with increasing frequency across private, government and not for profit / development sector organizations which are not considered to be in the knowledge driven sectors.

The question is; are we at the stage that this initial varying degree of prevalence of the markers in other sector may become the norm across organizations and sectors? Only time will tell. However, I am convinced that we are seeing the beginning of another divide that will start another wave of brain drain as organizations start to realize this phenomenon and start to poach intellectual staff from all over the world.

Carbohydrates Benefits For Body Health

CARBOHYDRATES BENEFITS FOR BODY HEALTH

Carbohydrates Benefits For Body Health – Carbohydrates are one of a wide variety of organic compounds which are abundant in the earth. Understanding carbohydrates consist of carbon, oxygen, and hydrogen. The function of carbohydrates is very diverse and very useful for living things. The function of carbohydrates for mortal one as a fuel source.
For plants during the photosynthesis process can turn carbon dioxide into carbohydrates. The carbohydrate contains a carbonyl functional group and a hydroxyl group. The term of carbohydrates was originally used on a class of compounds which has the formula (CH 2 O)n.
Molecular form of the simplest carbohydrates consisting of a simple sugar molecules called monosaccharides. Many of carbohydrates which is a polymer composed of molecules and sugar molecules are strung into a long chain and the chain can forked branch, called polysaccharides. In addition to monosaccharides and polysaccharides, there are others that is a disaccharide (a series of two monosaccharides) and oligosaccharides (a series of several monosaccharide).
Carbohydrates Benefits For Body Health - 1
Monosaccharides
Monosaccharides are the simplest carbohydrates, this is because the molecule consisting of several atoms C alone and unable to be degraded by hydrolysis into other carbohydrates. Monosaccharides can be divided into aldoses and ketoses.
Disaccharides and Oligosaccharides
Disaccharide carbohydrate which is formed from two monosaccharide molecules that bind through the OH groups by releasing water molecules. Example: maltose, lactose, and sucrose. Oligosaccharide is a polymer degree of polymerization of 2 to 10 and generally is soluble in water. If the oligosaccharide consists of two molecules is called a disaccharide, and if it consists of three molecules called triose. Sucrose is composed of molecules of fructose and glucose, maltose consisting of two molecules of glucose, and lactose molecule consists of galactose and glucose. Polysaccharides are polymers of several monosaccharide molecules can for straight or branched chain and can be hydrolyzed with several specific enzyme that’s how it works.
Polysaccharides
Polysaccharides are carbohydrates formed from saccharides numerous as the monomer. The general formula of the polysaccharide that is C6 (H10O5) n. Example: starch, glycogen, and cellulose.
There are some functions of carbohydrate that is essential for living beings, among others:
1) The function of carbohydrates as the main energy source. Carbohydrates are an important energy source such as glucose is required and can not be replaced by other sources of energy.
2) It has an important role in metabolic processes, can maintain the balance between acid and alkaline body, helping as forming the structure of cells, tissues and various organs.
3) Carbohydrates play a role in the process of digestion.
4) Assist in the absorption of calcium.
5) Represents forming other compounds.
6) Carbohydrates are the constituent components of the genes contained in the nucleus of cells and is very important in the inheritance.
7) Assist in the process (defecate). This is because cellulose is a polysaccharide that is difficult to be digested, but its presence is very helpful to prevent constipation.
Carbohydrates can be found in many foods, here are a few sources of carbohydrates:

Carbohydrates Benefits For Body Health - 2


• Egg whites
• Potatoes
• Seed grain
• Corn
• Cassava
• Bread
• Pasta
• A variety of dairy products
• Fruit Fresh Fruits
Sweet potato
Nuts
Brown rice
• Sago
That article on the definition of carbohydrates, a source of carbohydrates and carbohydrate function. The presence of carbohydrates is important and needed by the human body. Definition of carbohydrates which is one of a wide variety of organic compounds which are abundant in the earth. Therefore, it is good not to overdo and shortcomings in meeting the needs of carbohydrates. The good step is to keep carbohydrate intake remains balanced.

Hopefully article Carbohydrates Benefits For Body Health can we share today can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

Becoming a GI Joe

All carbohydrates have a value on what is known as the `glycaemic index’ (GI), which indicates how quickly that carbohydrate is metabolized by the body and converted into glucose. The lower a food’s GI, the longer it takes to be converted. Foods with the highest GIs are the ones that will have the most profound and immediate effect on your blood-sugar levels. All the carbohydrates on a weight- loss and insulin-balancing regime should come from the lower ranges.

There are two indexes: the glucose standard, which rates glucose as having a GI of 100 and the white bread standard, which is based on white bread being equal to 100. Other carbohydrates are assigned comparative ratios based on these figures. It doesn’t really matter which index you adhere to, for they both give a pretty good – and sometimes surprising – insight into the speed with which certain carbohydrates are assimilated into the bloodstream.

Diet Start

Below are a few GI values of common foods, based on the glucose standard. Of course you are not expected to remember each specific food’s value, so to make things easier, opposite are two simple tables showing you how to classify fruit and vegetables into those with a low GI value (under 20), those with a medium value (20-60) and those with a high value (over 60).

Density values

Each carbohydrate can also be evaluated by its density value. This is the amount of usable carbohydrate in relation to fibre and water content – the more fibre and water a vegetable or fruit contains, the less usable carbohydrates it will have. The most dense carbohydrate foods are pulses, wholegrains and starchy vegetables, particularly when they are cooked and their fibre is broken down, these will raise your insulin levels, so always be aware of this. The table opposite contains a list of low-density carbohydrates that should form the basis of your carb intake on a low-carb diet.

Not only do many fruits feature highly on the GI scale, but a few should also carry a carbohydrate density warning sign. Bananas, dried fruit and concentrated fruit juices are all a bad idea if you are trying to balance your blood sugar levels. It is best to avoid these totally until your blood sugar and weight have normalized, and then carefully re-introduce them into your diet.

Focus on fibrous vegetables that can be eaten raw or steamed – the type that lose a lot of water whilst cooking. This will mean increasing your intake of leafy green vegetables, such as Swiss chard, green cabbage, kale, bok choy, rocket, spinach and endive.

It’s Not Just You™ – HumbleBundle ‘Vegas Pro, Discover Creative Freedom’ Installer/Registration Not Working [Notification]

For the next two weeks (13 Days, according to the Countdown at the HumbleBundle Website, starting today) there is a fantastic offer for Video Editors, Music Composers, Web Developers and more – over $900 worth of Software, including Sony’s Vegas Pro [the Vegas Editing Product Line was bought out by MAGIX, a German software company that has produced it’s own editing software for years, popular for their “Music Maker” and “Movie Edit Pro” lines]. So what’s the issue? Well, this Bundle is so darn popular, many parts of it aren’t working/responding, at this time. For example, if you run into the Installer ‘starting but just closing/crashing’ or the store or program ‘not registering’ or the ‘website is down’… just letting you know… It’s Not Just You™

Part of the reason why this Bundle is so popular (although many HumbleBundles are quite popular at different times), is because one of the main pieces of Software offered is Vegas Pro Edit, originally by Sony. This video editing software is a Premium Version (“high end”) of this program, normally being sold at around $400. Along with other great products, such as Magix Music Maker, Xara’s Photo and Graphic Designer, Xara’s Web Designer, Photo Story Deluxe and more – it’s easy to see why this Bundle is so popular, for all kinds of content creators and producers. Indeed, if you are into (or trying to get into) making music, editing video, or web design, at all; I highly recommend picking up this fantastic bundle of software, if you can. The link/URL to the HumbleBundle directly, is here:

https://www.humblebundle.com/software/vegas-pro-creative-freedom




For those unfamiliar with HumbleBundle, it is a retail site that offers a mix of software, books and games, connected to and donating a portion to, a customer’s chosen Charity. For example, my account is connected to Extra Life, the ‘Gaming Marathon’ Fund Raising charity that I try to play for every November, on behalf of Children’s Miracle Network Hospitals. Because I attached this Charity to my Account, any purchases I make will contribute a portion to my charity. One of the greatest things about HumbleBundle however, is that the products – although one is not able to choose which products to buy specifically – are usually offered in ‘portions’ or ‘packs’ for any amount that you can afford to pay (as low as $1 up to whatever you can pay for the software company/charity/etc); and the more you can pay/donate, the more software/books/games/etc you will get. Since 2010, these ‘Pay What You Want’ Bundles (for Windows, Mac and Linux) have become quite popular over time.

The issue that has arisen this time then, is that the Bundle is so popular, that the server for the Installer has become Unresponsive (“not working”). Even the Website for the Retail/Vendor/Developer itself has become Unresponsive, giving this Error Message [to me] seen below (from Chrome):

As also sometimes happens with the most popular HumbleBundles, some people are experiencing very slow Downloading of their purchased products (as in 256kBps or less). Others are experiencing the Installer for the products stops functioning. This is what I personally am experiencing too (the Installer seems to startup, but then ‘crashes’ (or at least disappears) and is unable to continue. After one random attempt, I got a message stating that the Installer actually tried to Download the Installation Files but could not properly communicate with their servers. The message that came up [for me] can be seen below:

Trying another time later on, I did see the Installer for the ‘MAGIX Music Maker 80’s Version’ pop up and start Downloading, which was nice to see; however the overall download speed was pretty slow [understandably] at about 300kBps.

If I may make a Suggestion then – if you are running into any of the issues above, at this time: my suggestion would be, to definitely pick up the Bundle if you can [Note: You have to purchase the Bundle for at least $20 to get Vegas Pro] – then wait a while before you attempt to install anything. According to the MAGIX website, you can access your purchase (to install it) anytime after buying it, from now until September 2018 [Note: A free Magix account must be created if you do not already have one]. So, there is no rush, once you purchase it, to get the Installation Files from MAGIX. I also recommend backing up your Installation Files, once Downloaded, onto a USB drive, External Drive or even Optical Disc – anything that can back up your purchase for future re-installation, if needed (at least, until you buy a newer version of any applications you like..).

By the way, a quick note about Vegas Pro ‘Edit Version’ (about a 450MB download) – for those wondering about the difference between the Vegas Movie Studio versions and the Vegas Pro versions (and what the ‘Edit’ identifier means), here is a short summary of the differences:

  • the Movie Studio versions of the editor are an easier-to-use, scaled-down version of the Vegas editor, with still many features, allowing up to 200 Tracks of Events (clips/media) – increased from 20 Tracks recently! It just lacks many of the advanced features of the Pro versions (such as the  ‘NewBlueFX Titler’ [professional version], Bézier Tool Masking (“any shape”), et.al). The Movie Studio version comparisons can be found here:

    http://www.vegascreativesoftware.com/us/vegas-movie-studio/product-comparison/#productMenu

  • the Vegas Pro ‘Edit version’ of the editor costs less than the other Pro(fessional) versions, as it is missing the DVD/Blu-Ray authoring package, as well as some advanced filters and creation utilities (such as the Boris FX media generators, et.al) – it is still a ‘full featured’ Professional-level Video Editing program however, allowing Unlimited Tracks, full 4K Support, Bézier Tool Masking (“any shape”), includes the ‘NewBlueFX Titler’ [professional version] and much, much more. The Pro version comparisons can be found here:

    http://www.vegascreativesoftware.com/us/vegas-pro/product-comparison/#productMenu


[Note that the links above will show the most recent versions of the programs, but the comparisons themselves (the effects and capabilities of each) will remain similar, despite the edition versions changing over time]

Here is a capture of the Vegas Pro ‘Edit version’ comparison, for the 14th edition [CAD prices, sorry]:

Although the Vegas line of editing products have always had a bit of a learning curve due to their more advanced capabilities (Sony used to give out a DVD with some introductory courses for it; I am privileged to say I have one of these), MAGIX has created a few tutorials of their own, which can be found at the MAGIX Vegas Pro Tutorials website, here:

http://www.vegascreativesoftware.com/us/vegas-pro/online-tutorials/

So, try not to let it bother you ‘too much’, if you have run into any of these issues (downloading, installing, registering, etc). Just wait a little while longer and try doing it again, in the near future. For now, don’t worry – It’s Not Just You™…

Good Luck with it – and Have Fun!
[Note: I am not affiliated with Sony, MAGIX or HumbleBundle in any way, and I will not receive any compensation for mentioning them here – I am merely an enthusiastic user of their products and wanted to share what I felt was helpful information/notification. I have used other video editing programs in the past (such as PowerDirector, Nero Vision and Windows Movie Maker and some free video editors, such as Avidemux, DVD Soft’s FreeVideoEditor and VirtualDub) and will still use them when desired in the future]

Addendum:

During the time it took for me to compile this posting, I was able to try again and began Downloading then eventually Installing Vegas Pro [Edit version] – and it is going smoothly still – however, Downloading of the various applications in the Bundle are still quite slow. 
If you do not mind that, dear reader, go ahead and try again now; otherwise, as in my Suggestion, perhaps wait a while (as in days) before attempting to have a fast/smooth installation of these popular applications. 

Deals and Sales: Saints Row 2 and Syberia II, TotallyFree™ [Notification]

Update: As of Sunday, April 23rd, Saints Row 2 is no longer available for Free, but Syberia II still is

I haven’t been feeling too great lately (hence my not posting for a while) – but I wanted to make sure and come and get a quick notification out, for those that don’t know and are interested – that I saw two games being given away TotallyFree™ right now:

Saints Row 2, the open-world, GTA-style Action game is at GoodOldGames (now just GOG, they also offer newer titles these days), found at GOG.com

and

Syberia II, the third-person, mouse-driven Adventure game is being given away at Origin’s “On the House”, found at Origin.com

Both are completely free, so go get them now! GOGOGO

[Note: I do not get any compensation in any form for mentioning these games or companies here (there are no ‘referrals’ or ‘trackbacks’ in the links above); I am just a gamer who likes to share things I figure out and find on my own here, with you, other gamers… Have fun!]

My recommendation: The 3-step dietary programme Do what I did, look the results

The dietary plans that follow offer simple, nutritious and delicious recipes on a staged regime that should take you from overweight to optimum weight and enhanced well-being.

The reason many people depend on junk and convenience foods is because they lead such busy lives. Most of the recipes in these plans are quick to prepare, and should be within the capabilities of even the most reluctant cook. There are exceptions: preparing the Chicken Soup will take a couple of hours, but it makes a lot and you can freeze separate portions, ensuring that you can have a nutritious low-carb meal even when the clock is ticking away.

So blitz your cupboards and discard any foodstuffs that don’t fit the bill. The journey to a healthy, lean body begins here.

The Plans

The 3-step programme includes 3 eating plans. The Fast-Track Plan will help you lose weight quickly and give you that all-important boost on a 50 per cent protein/20 per cent carbohydrate/30 per cent fat regime that will initiate benign dietary ketosis. It should last for 7-21 days, after which you are ready to move on to the next stage. Your weight loss should be around 2-5.5kg (4-121b) if you are a woman and 4-7.25kg (8-161b) if you are a man, depending on how long you remain on this plan.

Diet Start

During the Keep on Tracking Plan you increase your levels of low-tomedium GI carbohydrates and move into a 35 per cent protein/35 per cent carbohydrate/30 per cent fat regime. You still monitor ketosis and watch how introducing higher levels of carbohydrates affects your weight loss, which should now even out to 0.25-1 kg (1/2-21b) per week.

The No Backtracking Plan is your eating regime for life. You can gradually introduce fruit and vegetables, grains and pulses from the higher GI ranges, in moderation. It is important to keep an eye on how your body reacts to these and to establish your perfect weight-management level.

If you are a vegetarian, there is plenty of advice on how to adapt the plans and recipes to suit your dietary requirements. Granted, your choice isn’t as varied as that of a non-vegetarian, but don’t use this as an excuse not to give it a go. If you follow the basic guidelines and make simple changes to the recipes where necessary, you should lose weight and eradicate insulin resistance successfully.

FOOD TO THROW OUT

  • White flour and sugar
  • Honey
  • Biscuits
  • Crisps
  • Sweets
  • Sugary drinks
  • White rice, bread, pasta
  • Processed foods high in carbohydrates
  • Ready-made sauces
  • Gravy mixes

Customize the plans to suit your lifestyle and dietary preferences

The suggested menu plans are not set in stone – they are templates to encourage you to eat the right sort and amount of food.

If you wish to change a recipe – because you don’t like lamb and would rather have chicken, say – it really doesn’t matter. Just try to use foods of a similar dietary value. When swapping vegetables and fruit, go for ones in the same GI category; try to exchange meat for meat, or fish for fish, in the same amounts. If you change a recipe from meat to fish, you may need to use slightly more fish to give you the same level of protein. For example, 125g (4oz) of poultry or lean meat should be replaced with 175g (6oz) of fish.

Simplify the recipes

If you are short of time, or like your food a bit plainer, simplify the recipe. If you don’t fancy Baked Tuna with Tomato and Herbs, adapt the ingredients, ensuring that you still have sufficient protein, carbohydrates and healthy fats – have a tuna salad with tomatoes and dark green leaves.

On a budget

If money is short and you find some of the suggested ingredients a little expensive, use some budgetary ingenuity to bring down the cost. Fresh salmon can be replaced with coley or whiting, or even tinned salmon.

Use the suggested meals as inspiration. In order to manage your weight in the future, you will have to experiment and be prepared to adapt.

Workout Fuel Conclusion

Workout Fuel Conclusion

WORKOUT ANYTIME has been holding a month-long competition on our Facebook titled “Workout Fuel” where fans were asked to submit their favorite pre-workout and post-workout snacks. Each comment acted as a submission and each like on a fans comment acted as a “vote.” In our final week of “Workout Fuel” each weekly winner is going into a head-to-head competition. You the fans may vote on your favorite workout snack! You can vote here: http://bit.ly/WorkoutFuelFinal
Workout Fuel | WORKOUT ANYTIME

My trip to Yapahuwa

I just completed an assignment for an international networked organization. They are in the process of establishing and sustaining a national level sister organization with district level branches which will belong to the same network.

The assignment was to critically look at the activities undertaken to sustain the district level branches. Well basically looking at the resource mobilization of each branch.

When considering resource mobilization for the development sector one automatically recalls the telethons and other fundraising activities done by charities to raise millions of dollars; quite similar to the ones that are going on for the Haiti earthquake relief operations.

However resource mobilization in the 3rd world is quite a different matter. It is fundamentally handicapped due to the following reasons.

  1. Most INGOs and Local NGOs operate in the 3rd world as project implementers. Therefore their articles of association / constitutions do not provide for resource mobilization (self generated / self raised funds).
  2. Due to above most states (in Asia) do not recognize them as registered charities that qualify for fund raising which is tax exempt.
  3. They are only allowed to receive funds from donors who already have funds or who have access to funds. Generally these funds when received in the implementing country are exempted from income tax.
  4. In fact, the local legislations which facilitate the registration of these entities for legal purposes themselves disallow any kind of activity which earns an income for the organization.

So, in order for an organization (NGO) to be legally able to engage in resource mobilization they have to:

1. Ensure that the articles of association / constitutions that they operate under provides for such activities.

2. Get the governments to recognize them as charities (this is generally done by conforming to already existing legislation or you would need an act of parliament or for parliament to pass new legislation to facilitate this).

3. Once you are registered as a charity that qualify for fund raising which is tax free you can look at the spectrum of resource mobilization activities which are at your disposal.

Fund raising activities in general falls in to the following broad categories.

  1. Cause / Issue based (HIV/AIDS, TB, Child Labour, etc.).
  2. Event based (Tsunami, War, Earthquake, etc.).
  3. Faith based donations to religiously affiliated organizations
  4. Bi-lateral funds.
  5. Multi-lateral funds

There is however another resource mobilization strategy which is “Income Generation Projects” which is: an organization (NGO) can engage in commercial activities such as training, providing a chargeable service, renting of assets, producing some products etc. to generate a profit. This profit is then used for development activities.

If an organization (NGO) wants to use this strategy they need to ensure that the articles of association / constitutions as well as the legislation / act of parliament clearly addresses’ this activity. Otherwise an organization may become liable for income tax. This risk may jeopardize the sustainability of the organization; therefore careful consideration must be given to the legal landscape before engaging in such activities.

However my client has started several “Income Generation Projects” without considering the above. There is a huge risk associated with this and no remedial action is being taken.

As for the income generation projects, they seem to have been started based on good ideas and not based on the profit they can earn to sustain a development project or a part of a project. Further they are being executed by the same staff taken to deliver development services (who by the way have no business skills) to the target groups; needless to say that the “Income Generation Projects” are doing poorly. They are hardly making profits some are making huge losses. In some cases, not only are they making losses, but they have very high turnovers which go beyond the value added tax threshold (VAT). This is a huge risk for the organization.

The assignment was well received by the client and they have already engaged me for a follow up assignment to develop realistic business plans for the “Income Generation Projects”.

Yapahuwa is a historic / archaeological town which boasts the second rock fortress of Sri Lankan kings. It is close to many not so famous archaeological sites and now boasts a new hotel – Yapahuwa Paradise. I recommend a visit to Yapahuwa if ever you are in the north west of Sri Lanka.

MODERN ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

Here is a mesmerizing seeks two-bedroom apartment with contemporary charm of events celebrating the beautiful Scandinavian style. The trough has two bedrooms and a kitchen year covers an area of ​​74 square meters. According Alvhem open plan living, social nucleus in apartments with high ceilings, walls painted in immaculate white, the beautiful oak floors and large windows. Splashes of color brighten the interior and seats with the elements that seem inviting visitors screaming. The kitchen island of brass with a thick sandstone table creates a social atmosphere that is sure to make any cook happy. The table has a sink sub-pasted from Blanco, who is both stylish and practical. From the terrace one has a spectacular view of the beautiful area and a perfect place for relaxation. What an inspiring use of space for a modern two-bedroom apartment!

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

Now on Instagram!

I’ve joined in the Instagram love! You can now find me at Eberopolis on Instagram.


I started using it on Wednesday, so I’m still new, but I’m making it a goal to post something (usually) classroom-related every day. Be sure to follow me so I can find all of my teacher-friends who are already there!

Have a great weekend!

SWIMMING POOL DESIGN IDEAS GERRR……

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

Here are some tips on how to keep your energy bill is lower and save valuable resources of the Earth at the same time.

* Heating your swimming pool: Depending on where you live and heat that is during the spring months and summer, you may not need to heat your pool as often as you think. The houses are in hot desert climates and do not need to heat the pool at night or when he decided to entertain. By heating the water, taking into account alternative methods of heating used to heat water. Energy from solar panels on your home is an excellent way to harness the sun’s energy to heat your pool.

* Cleaning the Pool: Many use automated equipment, which operate in the pool when the pool is empty. While helping to keep the pool clean when you’re in, but also the use of electricity 24 hours a day. Try to reduce the frequency to an automatic cleaning to be used. Also choose to use less chlorine, and to consider alternatives such as cleaners, detergents, ozone. Keep the cover over the pool when not in use also helps keep the debris in the air cleaner, leaves and twigs.

* Keep all plastic and vinyl toys away from the game: Even if I do not believe that the maintenance of the environment around the pool with pool toys the child is also important. Many pool toys are made of vinyl or PVC, also known as polyvinyl chloride. These types of toys, release toxins and chemicals hazardous off-gas. Try to select the pool toys that are made from natural organic materials and the safety of your children, and help keep the pool a greener place to play in.

* Use other sources of water in your pool: In your geographic area, using other methods to collect water in your home into account. Options could include rainwater that can be used to fill your pool, and the plumbing in your home for showers, baths, basin and toilet. This measure can help you reduce your water bill and conserve water on Earth. For many municipalities, geographic, you can earn additional benefits by LEED, or the benefits of saving tax on income tax time. Greywater reuse for your home is a viable option for many homeowners.

Owning a pool should be an enjoyable experience, after all, you deserve to relax and entertain in the warmer months of the year. Despite owning a pool should not be at the expense of its portfolio, the precious resources of the Earth or the health of your family. Follow these tips to green the pool and enjoy all the benefits of reading and resting in the sun.

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

SWIMMING POOL DESIGN

Paperless Mission #6: Setting Up GoodReader (iPad)

This is the sixth post in my Go Paperless! Challenge Series. If you haven’t completed the previous missions, be sure to complete those first.

  • Mission #1: Gather Your Tools
  • Mission #2: Build Evernote Notebooks
  • Mission #3: Email Notes to Notebooks
  • Mission #4: Create Checklists in Evernote
  • Mission #5: Organize Your Files in DropBox

Also be sure to link up at the Go Paperless! Linky. 

Mission #6: Setting Up GoodReader (iPad)

As I’ve mentioned before, I work off a lot of devices. I’m in a 1:1 iPad classroom, but even before my students had access, I had an iPad of my own that I used constantly. I liked having it handy for anything that I was working on, and once I learned about GoodReader, my love for the iPad grew tremendously. I’ve shared some love for GoodReader before, but GoodReader is the ultimate document reader for the iPad. It allows you to read any type of document and annotate over .pdf files. It also syncs with a variety of other apps, allowing you to pull and read all of your important documents into one place.

Once you have your important documents organized on Dropbox, open up the GoodReader app on your iPad. Here, you’ll be able to connect GoodReader to your Dropbox account. To do this,

My documents list already has some items and folders listed, but yours will likely be empty. The left column shows all of the folders and documents you have saved in GoodReader (and could therefore access without an internet connection). The right column has all of the utilities for GoodReader. Today, we’re going to focus on the one towards the bottom — “Connect to Servers.” 
When you click on the “Add” button, you’ll be able to see the many, many connections GoodReader can make. Here are a few highlights:
  • Popular Mail Servers (GMail, Hotmail, etc.) – this connection doesn’t grab all of your emails, but it will allow you to see any messages that have an attachment. This is great for when you’re at a meeting and somebody sends out some documents you need.
  • Dropbox – you can read all of the files that you’ve saved there.
  • Google Drive – view any type of Google Drive file that you have — from spreadsheets to presentations to documents.
The connection set-ups are fairly intuitive. You will need to name each set up (On some screens that shows up as “Readable Title;” I named mine based on what I was connecting to), but then you simply enter your username. You can also enter your password, in which case it will be saved to the device and you won’t have to enter it again, or you can log-in each time you want to access a document.
As you can see from my left column, there are a few folders that I’ve downloaded straight to GoodReader so they’ll always be available to me. These are folders that I’m constantly using and want easy access to. I also have it set up so that they’ll automatically download updates to those folders whenever I add more documents to my Dropbox account. 
Once the folders are set up in GoodReader, you can read the documents, but you can also annotate over .pdf files. I use that feature a lot on my curriculum documents, and I’ve also started doing all of my running records and reading assessments on my iPad. Here’s an example that shows you the annotation tools in the document viewing pane:
I keep my annotating toolbar pinned on the right side, and there you can see a variety of annotation options that are available — typewriting text, creating “sticky notes,” highlighting, underlining, drawing boxes, arrows, etc., and the last option is the freehand tool. I use this for running records with a stylus.
One of the best things about GoodReader is that it works well with other apps. Once I finish annotating a document, I can send it to other apps such as Evernote or Dropbox  from the original “My Documents” screen.

How I Use It

This is one of my must-have apps because of the broad range of ways it can be used:

  • Turn your iPad into a second computer monitor — When I’m using lots of curriculum documents to write unit plans, I can leave it open in GoodReader with all of my notes and highlights while I work on my laptop or computer. No more switching between screens on my computer. (Am I the only one who finds that annoying sometimes???)
  • Highlight standards that you’re focusing on each term without having to print out (or lose) new documents all the time.
  • Annotate rubrics, running records, and other types of student work
  • Use with students to create paperless assignments

I’ll be posting more in-depth tutorials about how to do all of these in future installations of this series, but for now, your challenge is to begin exploring GoodReader. Then, in the comment section, share a bit about how you think this app could be useful.

Spring break starts next week for me, and I can’t wait! I will try to get another installment posted this week, but I make no promises. It’s the end of the term, and that’s always a super-busy time with report cards and grading. I must say, however, that I’m more organized than ever going into this given how much less paper I’m using!

Have a great week!

fantastic paintjob on this speedboat

http://darkdraggon.tumblr.com/page/3

My Trip to New Delhi & Hyderabad Cont………

My 4th OCA was done for an organization in Hyderabad and I experienced something I came across the last time I did an OCA in Hyderabad. Readers of my Blog may recall my last visit to Hyderabad and the post of 10/12/09. Talk about déjà vu it was very similar on this occasion as well, but the difference was that it was led by the senior members of the board, who were eminent individuals in their own right. (I am talking about an attempt by the organization to cover up facts that directly deals with their capacity during the OCA). What made it very unpalatable was that they gave a presentation on the history and activities of the organization and conveniently omitted these facts from the presentation. This to me is a bad sign and a major put off. The irony is that even with these capacity issues the organization is a relatively capable organization and can be developed to do better; and the purpose for the assessment is exactly to identify these gaps so that they may be able to qualify for a grant to develop their organizational capacity.

Other than this the rest of the assignment went as usual and finished the OCA by 4 PM on the 3rd of March. I went directly to the airport to take a flight to New Delhi for the 5th and last OCA. While waiting to board my flight I noticed a very weird thing. The displays at the Hyderabad airport that give flight departure details were giving a lot more information than it is logically required for passengers waiting to board flights. Let me explain; it starts with the information tag against the flights numbers as “Gate Open” and then as time goes by it proceeds to change the tags to “Final Call”, “Gate Closed”, “Boarding” and finally to “Departed”. In my experience this is the extent of the information which can be relevant to any passenger in the terminal and it stays for at least 10 to 15 minutes on the information board and then it is deleted from the board. However in Hyderabad Airport this is followed by another information tag saying “Airborne”; now who needs to know this? Does it mean that if you are late for the flight and that if the flight is not airborne they will put you on it? Don’t think so; as they say “gate closes 15 minutes before departure time”. Further given today’s security climate well-wishers are not allowed in the terminal. So go figure this one out.

WORKOUT ANYTIME on CNN Money

WORKOUT ANYTIME on CNN Money in an article titled, “What’s next for Blockbuster’s empty stores.”  The article gives information about the recent announcement that Blockbuster will be closing their remaining locations, and how this benefits franchises looking for real estate in growth markets. WORKOUT ANYTIME is featured at the beginning of the article with info about WORKOUT ANYTIMEopening 20 locations in former Blockbusters and looking to open more. Randy is quoted about why the locations are ideal and how easy it is for them to convert the real estate. Jeff is quoted about the great location and how easy it is to tell members of the community where to find the gym. The article also states that WORKOUT ANYTIME is looking for more Blockbuster stores to convert to WORKOUTANYTIME locations.  Click here for the entire article or begin below.

What’s next for Blockbuster’s empty stores
By: Patrick deHahn

Blockbuster’s closing signals the end of an era, but it also means there’s a lot of retail space to fill.

Last week, Blockbuster announced plans to shutter its remaining 300 U.S. locations. It was the final nail in the coffin of a steadily declining brand, which was bought by Dish Network (DISH, Fortune 500) in 2010 after the retailer went bankrupt.

(Read More)

HOME DECORATING WITH ASIAN STYLE

Asian themes uses bright and vibrant colors, and thus, it might not always be a good idea to do up the whole house using this theme. It is always better to concentrate on some part of the house and use it as the focal point by decorating it using the Asian theme. There is heavy dependence on texture and color in this theme, and this needs to be kept in mind.

Home Decorating With An Asian ThemeHome Decorating With An Asian Theme


Home Decorating Room With An Asian ThemeHome Decorating Room With An Asian Theme


Home Decorating With An Asian Theme Bed RoomHome Decorating With An Asian Theme Bed Room

One of the best places to decorate using the Asian theme is the dining room of the house. When the dining room is decorated, one obviously can use the vibrant colors but besides one can also add decorative pieces on the table. One can use things made of bamboo or Chinese utensils which are very famous in the Asian area.

LUXURY GIRLS BEDROOM DESIGN DECOR STYLE GOOD

The design of a room can be a major problem in the redesign of your home. The problem could grow if you have to do for a child – a girl in particular. But do not worry, because we had some bedroom design ideas for the creative minds of the people working with the Italian girls.

LUXURY GIRLS BEDROOM DESIGN DECOR

LUXURY GIRLS BEDROOM DESIGN DECOR

They work in an atmosphere of classic charm in a contemporary way through a range of unique colors. Most models adopt a classic style, with good curves and cushions, and a pile of wood painted to create the perfect atmosphere for your little princess.

LUXURY GIRLS BEDROOM METAL DESIGN DECOR

LUXURY GIRLS BEDROOM METAL DESIGN DECOR

LUXURY GIRLS BEDROOM DESIGN IDEAS

LUXURY GIRLS BEDROOM DESIGN IDEAS

LUXURY GIRLS BEDROOM DESIGN CONCEPT

LUXURY GIRLS BEDROOM DESIGN CONCEPT

Quick Tip: Fallout 4 – “Get Rid Of Someone You Don’t Like” in Your Settlement (Without Killing Them or Using Cheats) [Suggestion, Text-Only Mode]

Just wanted to share something that came up, in answering a Question someone asked in the Official Steam Forum for Fallout 4 – in case anyone has a Settler in one of their bases that they really, really don’t like…

A person asked in the Forum, how to ‘get rid of’ Jezebel‘, whom for those who do not know, is a Robo-Brain type automatron, from the Automatron Official DLC. Without getting into any Spoilers, I’ll just say “she has an attitude”…

However, because she is a Resident of your Settlement, you cannot easily get rid of her, as attempting to just kill her will set all of the other Settlers gunning for your head in retaliation/defense.

Also, although she can be Assigned to the Task of, say running a Shop at the far end of Town and ‘stay there’, she is not of much use in that respect – because Robots cannot run Shops/Stores [sadly].

I thought of using her to start a Supply Line (so her Task/Job will take her out of town almost all of the time and you’ll rarely ever have to see her) – and saw that another helpful Fallout 4 player thought of the same thing – and already posted it as a Reply in the Discussion…

Still, I could add (as a Tip perhaps); that you can ‘send her away’ even more so by first Moving her to a Settlement that you rarely go to (using the MOVE menu bar command, at the bottom of the Workshop Mode interface).

You could Move her to Oberon Station perhaps, or The Slog [those are where I normally send ‘people I don’t like’ lol] – anywhere that you normally don’t ‘check up on’ as much as you do your other Settlements…

Then, after that, Assign her to become a Provisioner and start up a Supply Line (using the SUPPLY LINE menu bar command, in Workshop Mode) between the starting place of where you sent her (“far away”) and another place you rarely go to – that way, you will REALLY never have to see her again!

[Actually, you may still run into her, as you run into your Provisioners if you journey into the paths between the Settlements you have Supply Lines set up for – but still, if you pick two remote places that you don’t really visit often as her Supply Line nodes (start and end points), then you’ll really rarely ever bump into her]

Either way, I hope these ideas help any of you ‘get rid of someone’ you don’t like, from a Settlement (and you don’t want to kill them or use cheats/commands to do it). Have fun in Fallout 4!

Gain weight especially fat: Here’s what make you do

1. Food reactions cause fluid to surround invading food particles. When food macromolecules are identified as foreign invaders, your body launches the inflammatory response, which includes flooding an area that’s under attack. Your body will hold onto this water as long as reactive food substances remain in your tissues. This water dilutes these substances and reduces their effects, but at the same time the cells and tissues swell with water. This often accounts for swelling under the eyes and chin, in the hands, feet, ankles, and midsection.

2. Food reactions release hormones that cause fluid retention. To offset the effects of the allergic inflammatory response, the body produces hormones, such as adrenaline. But these hormones cause water retention. The adrenal hormones cortisol and aldosterone increase sodium uptake, and sodium attracts water to cells and tissues.

This action also triggers other hormonal changes, apparently through effects of the pituitary gland, which orchestrates your body’s ‘hormonal symphony.’ These other hormonal changes may include excessive secretion of anti-diuretic hormone, which causes fluid retention. Anti-diuretic hormone is also often secreted in response to stress, and is commonly released by women as part of premenstrual syndrome. The female hormone estrogen, which can be affected by food reactions, also increases water retention. Furthermore, growth hormone, which helps boost the metabolism, can be depressed by food reactions.

Diet Start

Besides these hormones, which circulate throughout the body, food reactions also have strong effects on certain gut hormones (including cholecystokinin and somatostatin), which can cause water retention and swelling directly in the gut tissues. Sometimes, when people experience immediate abdominal swelling after eating, it is due to the influence of gut hormones.

Because women tend to have more problematic hormonal profiles than men, the hormonal elements of false fat tend to be worse for them. For example, when some menopausal women are given extra hormones, their bloating and swelling increase.

When people stop eating their false fat foods, however, these hormonal problems usually stabilize quickly.

3. Food reactions make intestinal membranes swell. There is often pronounced swelling of intestinal membranes, in response to irritation by allergens and in response to hormonal imbalances. This can account for the ‘pregnant’ look that often characterizes false fat. The result of this type of swelling is a feeling of heaviness and congestion in the abdomen, particularly in the small intestine.

4. Food reactions disrupt cell chemistry, causing fluid storage. Food reactions cause a condition called cellular acidosis, which harms cell chemistry and results in fluid retention. Here’s how it works. The inflammatory response, caused by food reactions, causes calcium and sodium to enter cells, and this attracts water. It not only causes swelling, but also depresses the function of the cells’ energy centres, or mitochondria. When the mitochondria are disturbed, it saps your energy.

This action also causes even more release of the stress hormones cortisol and aldosterone, which try to correct the chemical imbalance. But this in turn just causes more fluid retention.

Furthermore, as the food reactions subside, the cells release all of these acidic chemicals into the tissues. This can cause a new round of inflammation and the release of even more protective fluids. Over a long period of time, this tissue acidity can contribute to the onset of degenerative diseases, including arthritis.

5. Food reactions cause capillaries to leak fluids. As you may recall, many food reactions release chemicals, such as histamine, that make blood vessels expand and contract, in the process leaking fluids into tissues. This leakage of fluids causes further inflammatory reactions, with accompanying swelling. Sometimes this swelling can impinge upon nerves and cause aches and pains. It can also cause hives, due to the swelling of capillaries near the surface of the skin.

Often, when this fluid leaks out of capillaries, it carries protein with it. This protein in turn attracts sodium, which causes even more fluid retention. The combination of sodium and fluid outside the cells can ‘smother’ cells by making it harder for oxygen to reach them. This contributes to further cell malfunction, and even to the death of cells.

When cells die, even more water is drawn to the area to flush away the dead cells.

6. Food reactions cause gas production. Food reactions allow the proliferation of abnormal bacteria and yeasts, and these factors lead to fermentation of food. Fermentation, primarily of carbohydrates, forms wind or gas, including methane.

Secondarily, it creates by-products of alcohol metabolism, such as the chemical acetaldehyde, and alcohol itself. Both of these substances can impair mood and cognitive function when absorbed by the body.

Food reactions also tend to slow the natural squeezing of food through the digestive tract by the bowel-muscle process of peristalsis. When food transit through the bowel is slowed, more gas and fermentation products are produced. Also, this `constipation effect’ causes more irritation of the bowel lining. This can create even more gas and can also contribute further to leaky gut syndrome, allowing reactive macromolecules to slip through the intestinal wall.

Bacterial overgrowth in the small intestine also causes fermentation and gas. This causes pressure and discomfort in the small intestine, because the small intestine is relatively narrow and doesn’t have much room for expansion. Another major contributor to gas buildup in the small intestine is lack of the digestive substance hydrochloric acid, which is abnormally low in approximately 70 per cent of all people over 60. Hydrochloric acid, or stomach acid, also tends to be chronically low in people who are under stress, in people who eat lots of processed foods, and in people with food reactions.

Gas formation is also increased by use of anti-inflammatory drugs, such as aspirin, which irritate gut mucosa. It can also be exacerbated by antacids.

In addition, poor digestion also causes increased excretion of the amino acid taurine, which lowers cellular magnesium and slows peristalsis, resulting in more intestinal gas.

Lastly, women’s menstrual cycles upset hormonal balances, and this also impairs peristalsis.

All of these factors are insidious. They feed off one another and contribute to bloating and swelling. The result of this entire range of forces is a swollen, distended belly and puffy, spongy flesh all over your body. Until now, you may have thought that this was fat. Now you know it’s not. It’s false fat — and you can get rid of it in a week or less if you make the necessary effort.

I’m sure you can do it! Every day that you make the effort, you’re going to feel a little better. You’ll look better, too.

Modern Side Table Lamps Design

If you are an artistic creation lover then you must observation for modern side table lamps. It has a funky look which might make you feel as if you are in around future time or in space. Its abstract and artistic design complements the other paintings and art fashionable your home along with elegance and beauty.

If you’ve a woody environment at your home base decorated in Indian style, then western table lamp design is the best choice for you. The western table lamp comes in a cowboy sort of look. Either there is a cowboy along with a horse of just a horse attached on it. This gives a very classy look to the woodsy type of a house.
Country style reminds you of Country music only but you can also find a country style table lamp also. It’s farm animals alike cows, cocks and others designed on it. It is considered to be the most colorful sort of lamp with natural color and scene.

Oriental lamp shows much about Asian culture in its design. The unique Asian roots can be seen in this type of lamp and would best fit if you have a room filled with Asian souvenirs.
Choosing the perfect table lamp for every room should be your concern as their being complementing the living furniture makes out the atmosphere. There are various styled table lamps for your side tables like western table lamp, modern, urban, Asian and nation but to pick the better for every room needs examination and time. Here is a little guideline for you:
Now you have a selection of lamps from which you can choose the best for your place. Take care of the existing decoration of your home when you choose the side table lamps.

Fast-Track principles

This is a diet, or a way of eating, that will:

  • Lower insulin levels and stabilize blood-sugar levels
  • Banish food cravings
  • Eliminate energy peaks and troughs, and mood swings

Enhance concentration

  • Re-educate you into a way of eating that will increase your vitality and improve your overall health
  • Help your body to burn fat and normalize your weight.

It is vital that you understand the principles of this diet and follow it responsibly. If you are fundamentally healthy, but insulin-resistant and experiencing any ofthe accompanying symptoms, this plan will help you redress the balance and find a level of carbohydrate intake with which your system can cope. The Fast-Track Plan offers you a kick-start and is aimed at women with a BMI of over 35 and men with a BMI of over 25.

Diet Start

For the period of this plan you base your diet on an approximate ratio of 50 per cent high-quality protein/20 per cent low GI carbohydrates/30 per cent healthy fats. You begin the first two weeks of the diet by restricting your carbohydrate intake to 20g (3/4oz), your protein to 150g (5oz) Biological Value and healthy fats to a minimum of 40g (1 1/2oz). On a very simplistic level this means:

  • 3 cups low GI vegetables per day.
  • 1 portions of protein three times per day and portion twice per day as a
    snack. (A portion of protein is the equivalent to the size of your palm.)
  • Around a half to a whole teaspoon of allowable fats at every meal.

Within 48 hours your body will start to burn its own fat as fuel, as your body switches into benign dietary ketosis.

Ketosis

Being in ketosis means that your body burns fat because it isn’t taking in sufficient glucose to meet your energy needs. Under everyday conditions the carbohydrates that you eat are converted to glucose, which is the body’s primary source of energy. Whenever your carbohydrate intake is limited to a certain range, for a long enough period of time, your body will draw on its fat stores — turning this into a source of fuel called ketones. When you burn a larger amount of fat than is immediately needed for energy, the excess ketones are discarded in the urine.

Dietary ketosis has received a bad press because it is often confused with ketoacidosis, a life-threatening condition most often associated with insulin- deficient, type 1 diabetes.

Benign dietary ketosis, however, is a natural adjustment to the body’s reduced intake of carbohydrates, as the body shifts its primary source of energy from carbohydrates to stored fat. The presence of insulin keeps ketone production in check so that a mild beneficial ketosis is achieved. Blood-sugar levels are stabilized within a normal range and there is no breakdown of healthy muscle tissue, as long as sufficient protein is included in the diet.

Measuring ketosis

On a rapid weight-loss diet you will usually start to burn fat instead of sugar within the first 48 hours. To measure the ketone levels in your urine, buy urinary test strips, called lypolisis strips, from any pharmacy, which will show you if your carbohydrate/insulin balance is at optimum levels for fat burning. You should do this twice a day: before breakfast and before your evening meal. Your levels need to be between trace and small (0.5-1.5 mmol-l).

Caution: if your levels rise to above moderate (4 mmol-l), you are not eating enough and should increase your low GI carbohydrates until the ketones are reduced to between trace and small (0.5-1.5 mmol-l). Always drink plenty of water: at least eight large glasses per day.

My Trip to Vietnam

I am on my way to Vietnam for an organization capacity assessment of a multilateral organizations’ branch office as well as their partners. I had few tense moments in getting my visa on time but everything worked out. This will be my third trip to Vietnam; my first trip was back in 2005, my second trip was in 2007.

The first trip was to train the senior management of the largest ministry in Vietnam on Sector Wide Strategic Planning. I recall that my liaison officer was very hospitable and took me around Hanoi every night. I had to sample the snails, frog, cat and dog in a variety of restaurants, washed down with copious amounts of snake wine. It was one of the most memorable assignments for me and I made a lot of friends there.

My second assignment in Vietnam was to train and conduct an organization capacity assessment along with the senior management of a ministry in PDR Lao. As a perk to the staff the training was moved from Vientiane, Lao to Hanoi, Vietnam.

Doing a Strategic Plan / Organization Assessment in a communist country is quite different. There is no Institutional landscape for you to influence or lobby. There is the communist party line and laws and statues based on them; everyone has to live within these boundaries. Influencing and lobbying can be considered political subversion and it is not practiced by organizations. Even when dealing with the private sector you and your competitors have to live and operate within these bounds. It can be argued that this is indeed a very controlled level playing field.

I am looking forward to doing this assignment.

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

Raise your hand if you’re a fan of traditional interior design schemes. Because today we are proud to present a wonderful house of fascinating details are located in Gothenburg, Sweden. Seen on Skeppsholmen, the project has a nice open living room, which covers the dining room, as well as the terrace and garden. On the second floor above the living room is furnished with a bedroom in the attic, and storage facilities well. Basement can accommodate storage / boiler room and laundry area with washing machine. The entire house is a charming and traditional, because of the presence of many moving parts in wood and other interesting colored decorations. We invite you to explore all and be inspired!

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS BEDROOM CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS BEDROOM CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS KITCHEN CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS KITCHEN CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS BATHROOM CHARMING HOME IN GOTHENBURG

TRADITIONAL DECORATIONS BATHROOM CHARMING HOME IN GOTHENBURG

My Trip to Thailand

When traveling east from Sri Lanka I generally travel through Thailand and transit in Bangkok. However I rarely get an opportunity to meet the people on the road as I am in a rush of checking in and out of hotels and flights. In April I was in Bangkok for a training assignment and had the opportunity to interact with people in Bangkok. I enjoyed the interaction with shop keepers and street vendors. However, I saw a significant difference in the pulse of the ordinary people. There was a more tense feeling with quite a high degree of uncertainty given the political situation in Thailand. Even though the current Prime Minister has promised to hold elections the majority of the Thais feel that the Army has started a war along the Cambodian boarder to postpone or effectively suspend the constitution again.

The fight between the “old traditional Thai power base” and the “modern Thai power base” led by Thaksim. Some of the expatriates I met seem to think that Thailand is getting into a situation or a case of “Thailand having an Army that owns the country”; something similar to Pakistan. The Army seems to have a great say in the lives of the Thai people and the politicians.

Thailand still remains a polite and friendly place to visit, however it seems to have shot itself in the foot regarding the tremendous progress it had made in the economic and democratic frontiers. As I come from a country that has seen decades of civil war I hope that sanity will prevail and the Thai people can sort out their differences and get ahead.

a passenger train in India had a most unusual issue, 22 carriages carrying 1000 people, got disconnected from the engine, and the emergency brakes didn’t work to stop it, it rolled backward 7 miles

http://www.bbc.com/news/av/world-asia-india-43697965/engineless-runaway-train-in-india-gives-passengers-a-scare

Raw Gameplay (Unedited) – Battlefield Play4Free (32 Players, Saiga-12 Won from The Daily Draw)

Battlefield Play4Free is a Free-To-Play title, where it doesn’t cost anything to join in, but you can purchase weapons, armor, clothing and other items for Real Money by purchasing Tokens that you can then use in the in-game Store. There is also a nice feature where you can win prizes (weapons, armor, clothing, etc) from a game called The Daily Draw, where you choose a card from a draw of eight and it will generate an item for you.

The items range from temporary one-day use weapons and clothing, to seven day usage, to permanent items your character (Soldier) can use in the game forever (for example, a scope that can be attached to a gun for that soldier for all time). This is great for those who can’t afford to purchase many in-game items, as it not only offers the possibility of getting some great gear ‘forever’, it also gives a nice preview of a weapon, mod or clothing, so that you can see what it will look like/feel like, if you decide to splurge and purchase it for yourself (supporting the game and developers as well) sometime in the future.

In this video, I present ‘Raw Gameplay’ (unedited gameplay) of BFP4F after winning a Saiga-12 Shotgun for one day’s usage on my Medic via The Daily Draw. I had joined a 32-player server (running a Rush map) that was nice and full (16 soldiers per side). After getting the kinks out and getting used to the controls again after not playing for a while, I think things picked up as the game went on.. I was soon having fun arming MCOMs and healing and reviving. Near the end, I realized that my Aircraft controls weren’t set/got reset, as my mouse wasn’t ‘inverted’ and I couldn’t fly the helicopter at all, haha.

Recorded game: Battlefield Play4Free, Online FPS
Recorded with: Bandicam (Registered Version) @ 864p
Recording codec: MPEG-1, 70% Quality, 30fps

This video was also a test of a few things (though not an ‘Official Testing Video’): I was messing around with different settings (resolutions, quality settings) to see how low I could set things before the quality suffered too much. This is of course, something VERY relative and what looks ‘good enough’ to one person, looks ‘like crap on a cracker’ to another person. What I was testing here was, what seemed good enough to upload to YouTube (since it recompresses anyway) and still be enjoyable, while making the recorded file as small as I could via Quality settings (which limits the bitrate somewhat) and resolution size (the larger the resolution, the more bitrate/filesize that would be required).

As I have stated in earlier articles talking about Quality, Bitrate and Filesize, I still find that going below 60% produces too many compression artifacts (macroblocks and ‘trails’, Gibbs effects and more) for many games, especially if there are large dark areas (which would get compressed more highly and have these compression effects occur in them). This doesn’t happen with all games however; some games are fast-moving and/or do not have many darker/flatter areas and using 50% quality doesn’t look too bad, even with the MJPEG codec. It’s a balancing and testing game, as some games (especially with text) look fine and others look very bad (the compressor will try to allocate more bits around edges like text and compress even more highly then, the flatter/darker areas in a scene). I have done recordings of news streams and other things however, that allow for a very low quality recording setting (down to 20%), but that is mainly because the source itself is of a low quality (many streams are highly compressed and there is not much ‘extra’ compression artifacts produced by recording it in a lower quality/bitrate, especially if you are going to downsize for the final output video).

For most games, I found I could go down to 70% Quality comfortably – as long as the resolution stayed ‘higher’ [720p or higher]. With lower resolutions, the bitrate/quality reduction means too many ‘casualties’, as 30% of a 1080p recording isn’t that many pixels when you consider the screen size; but one-third of a 480p recording is a huge amount of the already small screen being ‘lost’ to compression. Thus, with some testing (again to what looks “ok to me“) I arrived at a middle ground of 864p, which maintains decent clarity of text and is large enough to discourage overcompression of darker/flatter areas. For keeping recorded files small and downsizing to 720p HD, it looked fine to me in tests – and on some games, doesn’t look that bad even if you wanted to upsize to 1080p HD (clear text was maintained, etc).

So, enjoy this first installment in an ‘unofficial’ Video Series here at The Game Tips And More Blog: “Raw Gameplay” of Battlefield Play4Free. If you like the game, play it, tell others about it and buy some stuff from the Online Store and support it!

See You In The Game!

Any gameplay videos or animations uploaded are only one example of one possible path of game play and is not representative of the gameplay experience of the entirety of the game material as it is non-repeatable in exactness (movements, actions, viewpoints, etc) to a high degree of accuracy (especially in regards to online multiplayer play and interactions) and therefore is not a representation of a large portion of the game content (this includes complete Walkthroughs/Playthroughs, Raw Gameplay Footage and Tutorials). All material and content uploaded attempts to respect copyright and is presented for Educational and Entertainment purposes only, utilized under Fair Use and can be construed as Free Advertising. No copyright infringement is intended and cannot be inferred. Any possible representation approaching any infringement, to those seeking infringement action, requires double notification and will be honoured by permanent removal of the infringing material.

1st I’ve seen or heard of a GM supercharger on a 1958 Corvette

HOW TO DECORATE WITH NO MONEY

In the present times, the expenses are rising for everyone and this is the reason why budgets have become tighter. Having less or insufficient money, does not stop people from wanting things or wishing for them. The house is the place, where one spends the maximum amount of time and everyone wants that they house looks nice and attractive. There is a myth that if one wants to decorate or improve the house; they will need to spend a large amount of money.

HOW TO DECORATE WITH NO MONEYThis is not true as it is possible to decorate the house or a room without any money also. One needs to be attentive and use their creativity and in this way they can make the house look nicer.

One of the easiest ways to decorate a room or the house is to use everything that is already available in the house. One can use things which are packed off as of being of no use or one can use the things that are there in the room. Many times, just re arranging the furniture and the things in the house can create a new look altogether. Changing the color scheme of the room is also a good idea. One can use combinations of colors to create a new look. Throwing in new and vibrant colors in a room is also a good idea. New colors break the monotonous look of a room and help one change the way the room looks.

Another way to change the way a room looks is to add a painting or a wall hanging to the walls. This is a great way as it gives a new dimension to the room. A plain wall does not look nice and adding something to it can give a great look as well. One should always work on the larger area of the house and then move to the small ones. The house can be decorated with existing things in the house, and one can easily use these and decorate.For example you can use some oriental rugs from bedroom to put under the coffee table from living room. It is not always necessary to buy new things and decorate. Using the creativity one can create focal points in the house, and use this to create a new look in the house. When the focus of a room changes, it itself gives a new life and a new look to the room and this is one of the best and the most affordable ways to decorate the house without money.

Hello, 2015!

Another year is in the books, and as always, I’m excited to be seeing the start of a new year. Last year will be remembered for its big highs and deep lows, but I know that everything happens for a reason, and I feel like I’m in a good place to start 2015.

And one place I plan to start is being a better blogger! So here’s my Currently post for January 2015.

Listening – It’s my daughter’s bedtime here, and my husband has bedtime duty tonight. It’s a rare moment when the TV is off, the dogs are asleep, and all is quiet in the house. I’m savoring it.

Loving – I think that New Year’s Day may be my favorite day of the year because it is a fresh start where it feels like anything is possible. I often feel this way at the beginning of the school year, too, but I think I prefer this time of year because there’s more predictability with everything. I already know my students very well; we’ve built our routines and expectations, and the only things that need to be changed are the things I *want* to change. It’s an empowering holiday.

Thinking – A major reason why I haven’t been blogging much lately is because of my Ph.D. program. It feels weird to be writing something that doesn’t have a lengthy bibliography attached to it! I continue to be excited about my dissertation topic, though, and I’ve been thinking about it more and more. I plan to write about the role of social media in teacher professional learning. The short version is that I’m going to study how reading and writing about classroom practices through blogging affects teachers’ feelings of effectiveness in the classroom (self-efficacy beliefs). I think connecting with other teachers through blogging and other social media has been one of the best moves I’ve ever made as a teacher, and I’m curious to find out if others feel the same way and what consequences it might have. One of my classes this semester is actually requiring me to blog about my research, so I’ll be setting that up in the next week. It will be a separate blog as I doubt my classmates in other programs will really want to read about Eberopolis, but I’ll share a link here if you’re interested in following or learning more.

Wanting – I had 18 blog posts in 2014. Pathetic. I have a notebook full of ideas, so now I need to get them out here. My goal is to blog at least once a week, and as I’ve been getting other things in my life better organized, I think that’s realistic.

Needing – I set some big goals for this vacation as far as getting myself organized for the new year, and so far, I’ve done a great job. For example, I already have 2 months of healthy meals planned for my family (written on sticky notes so I can shuffle them around when stuff inevitably comes up).

And I’ve been cleaning closets and creating a new workspace to boost my productivity in the new year. I even made my annual pilgrimage to The Container Store today! I just need to wrap up my remaining projects tomorrow so I can enjoy my weekend before returning to school on Monday. (I’m @eberopolis on Instagram if you want to see more about those projects…). 
Finally, my three areas:
YES to my health. I lost nearly 20 pounds between Labor Day and Christmas, and while my trip to see my family for the holidays reversed that trend a little, I’d like to continue to focus on my health in 2015. I’ve been doing Weight Watchers, and losing weight has been easy when I’ve taken the time to plan what I’m going to eat and track what I eat throughout the day. I’m ready to get back on track.
Maybe to becoming a morning person. I already get to work by 7:15 each morning, but I would hardly call myself a morning person. I read The Miracle Morning by Hal Elrod over break, and it has me thinking about whether I should try to get up earlier to add things like meditation and exercise to my morning routines. I’m thinking I’ll try it for a month and see how it goes. (The book was good, btw. An easy read to be sure). 
I wish…I love my job–I really do–but I’m starting to feel like it’s time for me to tackle a new challenge. I want to be able to work with other teachers to help them troubleshoot issues in their classrooms, improve their teaching, and use technology more effectively. I purposefully chose to go into an Educational Leadership PhD program for that reason; ultimately I want to teach in higher ed and/or become an administrator. I’m not ready to do all of that yet, but I wish that I could find an instructional coaching position or something similar that would let me work more directly with teachers while I keep working on my program. It might be time to start that hunt this year. 
Okay, I promise I will be back soon…I have a couple of other posts in draft mode almost ready to share about some of the new things I’ve been doing in my classroom this year. Hopefully you’ll FLIP when you read them! 😉
Happy new year!

How to Optimize the Benefits of Vitamin D Supplementation

Vitamin D is constantly in the news lately and for good reason.    Optimal levels of Vitamin D have been linked to a host of benefits including prevention and treatment of many key diseases ranging from Osteoporosis to improved heart health with reduction in heart attack risk to prevention of many different types of cancer.
The ideal way to get optimal levels of Vitamin D is to let your body create it through Safe Sun Exposure (see previous blog on this subject here:  http://workoutanytime.blogspot.com/2016/08/the-facts-on-safe-sun-exposure-and.html  However this is easier said then done, and too much sun is clearly a strong risk factor for skin cancer!      Enter Vitamin D supplementation.
The amount and form of Vitamin D supplementation has changed substantially based on lots of emerging research.    The form that should be taken is Vitamin D-3 NOT D-2 form and all experts agree on this!     However when it comes to dosage things get much trickier.      The confusion comes because Vitamin D is really a powerful compound and functions as a hormone in the body.    As such it has profound impact on virtually every system in the body.    In addition you can overdose on Vitamin D supplements so more is NOT always better!
Ideally you should order a blood test and test your levels.    The test you want is called a 25(OH)D blood test and is offered by all major labs.   You can either ask your doctor to order this test for you OR you can order an in-home test.   You just prick your finger and put a drop of bloo on the enclosed paper and send back in to the labs.    You can also your own blood test online and go to a lab to have blood drawn in the same way your doctor orders the test.   For more information on testing go here:  https://www.vitamindcouncil.org/testkit/?gclid=Cj0KCQjwh_bLBRDeARIsAH4ZYEPhv0MVkO5_S7USZZ8bwVlt5A3vPWGbBFFIbJiB8Wtva0x-IDH7UmQaAlGkEALw_wcB#
Ideal versus Acceptable Blood Levels of Vitamin D

There is a big difference between what is considered “acceptable” or okay and ideal blood levels.   Here are the classifications of different blood levels of Vitamin D. according to the Vitamin D Council:
0 – 30 ng/ML is very low and considered a deficiency
30 – 39 ng/ML is better but still insufficient for optimal health and disease prevention.
40 – 100 ng/ML is optimal
Above 150 ng/ML is toxic!
The key is to test and if low take a supplement then retest 2 – 3 months after regular vitamin d use because each person is different in how much supplementation they need based on many factors including sun exposure and skin type.     The RDA for Vitamin D for infants is 400iu.    For Children 1 – 13 and adults through age 70 the RDA is 600iu and for those over 70 the RDA is 800iu.
Unfortunately, this is way too low to get many people into the sufficient much less optimal range so testing is really worthwhile.   In many cases people need 4,000 – 10,000 or more iu’s per day for at least a month to get where they need to be for optimal health!
Preventing Vitamin D Toxicity through the Co-Administration of Vitamin K-2

Like many vitamins Vitamin D has a co-factor or other vitamin that helps it perform its function better and in a more balanced fashion, and that other vitamin is Vitamin K-2 (not to be confused with K-1 found in many plants).    In an ideal world, you can get all the Vitamin K-1 you need from eating plenty of green, leafy vegetables, and your body can turn it into K-2.   Unfortunately, this conversion is lacking in many people.
More importantly K-2 is not easily toxic and can be taken with Vitamin D.    K-2 is best taken as a supplement as MK-7 version which has been heavily researched and shown to improve bone health and prevent arterial calcification which can potentially occur with too much Vitamin D.     For a more complete understanding behind how K-2 works with Vitamin D and why it is a great idea to take the MK-7 form of K-2 with Vitamin D check out this article from Dr. Mercola:   http://articles.mercola.com/sites/articles/archive/2011/03/26/the-delicate-dance-between-vitamins-d-and-k.aspx

Taking 100 – 200 mcg per day of Vitamin K-2 will help optimize the effects of Vitamin D and minimize risks associated with Vitamin D Supplementation.

DESIGN ROOM HOTEL LE ROYAL MONCEAU

DESIGN ROOM HOTEL LE ROYAL MONCEAU

DESIGN ROOM HOTEL LE ROYAL MONCEAU

Parisian palace since 1928, the hotel Le Royal Monceau offers a revival directed masterfully by Philippe Starck Different! Parisian palace Since 1928, The Hotel Royal Monceau Dining Room Offers revival has masterfully directed by Philippe Starck Different! It is the feeling that one can have by browsing the different areas of the vast Royal Monceau A desire a little crazy and infinitely poetic break with custom, to avoid chokepoints, to welcome the shift, and while cherishing the precision and perfection, displaying a fondness for the panache and daring, fantasy and excess It Is The Feeling That One Can Have by browsing The Different Areas Of The Will to VAST Royal Monceau sample christmas tree decoration and Slightly Crazy With infinitely poetic break custom, to Avoid chokepoints, to Welcome the shift, and while cherishing The precision and perfection, displaying a fondness pour la panache and daring, fantasy and excess.

37 Avenue Hoche, 08. 37 Avenue Hoche, 08. Champs Elysees, 75008 Paris Champs Elysees, 75008 Paris

My trip to Kuala Lumpur, Malaysia and Singapore, July 2010

This was my first trip on a budget airline (Air Asia); it definitely changed my opinion of budget airlines. This trip is more a business development and prospecting trip rather than an assignment. On the surface KL does look developed. However I have my doubts regarding the psyche of the Malaysians. I took in the usual site such as the Petronas Tower etc. The weather, the fauna and flora resembles Colombo; I did not enjoy the high humidity and the afternoon thundershowers.

Singapore was as usual (I have stopped counting the number of times I have been there) very orderly and hit the usual shopping and fun places. In my opinion the Singaporeans have not only developed in terms of the look and feel of the place but also in terms of the psyche of the people. I truly believe that they do think like westerners and the Japanese.

Let me give a classic example. As mentioned earlier I went to Malaysia and Singapore during the monsoon season and I made an observation. In KL when it rains; like in Sri Lanka the people stopped what ever they were doing and took shelter from the rain. Those who even had umbrellas took shelter as it appear they did not want to get there footwear wet.

However, in Singapore it was very different. I happened to be out one day early morning (going for a walk) when it started to rain. I was walking pasta a primary school and this is what I saw. A teacher was leading a group of very small children (6-7 years) who were clad in rain gear and they walked in a line and came out of the premises and they walked to the MTR station and got in to the train. Undoubtedly they were going on some sort of educational trip. What does this mean: In my opinion the Singaporeans are teaching their children to face obstacles and overcome / work around / find solutions to them. This is the essence of the psyche of an industrialized nation as opposed to an agrarian nation which generally accepts the affects of the elements as “gods will” or “karma”.

So even the very small children are trained to deal with a simple thing as the rain and have an attitude of using the right equipment to allow them to go about their daily business. So in adult life they do go and conquer the world economically.

I can certainly say that in Sri Lanka the vast majority of people have this agrarian psyche. Based on my observations it seems that quite a number of people in Malaysia still do too. So the challenge for those of us who have the privilege of influencing people is to; in some way contribute towards instilling the right attitude rather than anything else. I can say from my experience as a consultant and a trainer I derive more satisfaction in seeing this than my clients make huge profits. I say this because these individuals with the right attitude have the potential to influence / be a role model for the masses in these underdeveloped countries.

The Risk Factors That Cause Food Reactions (6-10)

Risk Factor 6. We eat too much at once.

Overeating causes food reactions by overwhelming the digestive system. Unfortunately, reactions also cause overeating by creating food cravings, and this destructive cycle ruins many lives. The problem gets even worse when people eat the exact foods that cause them to experience reactions. This often happens, however, because of the cravings caused by allergic addiction.

Overeating also disrupts the immune response, which further heightens food reactions.

Risk Factor 7. We’re under too much stress.

Stress hurts digestion. When you’re under stress, your stresshormones — such as adrenaline and cortisol — take blood away from your organs of digestion and shift it to the fight-or-flight organs and systems, such as the muscles, eyes, and heart. Sometimes, when you’re nervous, you feel this loss of circulation in your digestive system as butterflies in the stomach.

Diet Start

Proper digestion is most likely to occur when we take timeto eat our meals in a relaxed atmosphere. However, the average worker sits down for lunch for only eleven minutes, and many for only five minutes, or eats a sandwich unconsciously while working.

Risk Factor 8. We don’t chew our foods completely.

This interferes significantly with digestion. Foods that remain in excessively large pieces can’t be broken down properly, even when enough digestive juices are available.

Risk Factor 9. We drink too many liquids with our meals.

This dilutes digestive juices and stomach acid, keeping them from fully digesting our foods.

Risk Factor 10. We combine too many of these risk factors.

If we regularly made just one of these mistakes, we might not have a problem. Most people, though, combine several of these risk factors, and soon they experience the straw that breaks the camel’s back. Doctors call this reaching the allergic threshold.

All of these risk factors can cause your digestive system to dump large, unwieldy macromolecules of food into your bloodstream. When this happens, it generally triggers your immune response.

If your immune system is already impaired, your immune reaction to these macromolecules of food will be even worse. You’ll get reactions to a wider variety of foods, and your symptoms will be more severe and more frequent. Many forces can impair immunity: poor nutrition, exposure to toxins, stress, and lack of sleep.

Therefore, to avoid food reactions, you should not only minimize your risk factors, but should also try to optimize your immune strength, with a healthy lifestyle, ingestion of specific nutrients, and avoidance of toxins. I’ll soon tell you how to do this.

In addition, a number of non-food factors can make food reactions worse by contributing to the allergic threshold. The body doesn’t care if an allergen is a food-borne allergen or an airborne allergen, such as pollen. To the body, an allergen is an allergen. Food reactions are worse in people who inhale airborne allergens, are exposed to toxic chemicals, or are under stress.

Therefore, you are not just what you eat.

Food reactions — and therefore fat — can be caused by many factors, and food is just the most obvious one.

I know that this is a new, strange concept for many people. But I have tested this concept clinically and have seen it work wonders.

Here’s an example: a patient of mine worked in a paint shop and regularly inhaled airborne toxins. This man was bloated, puffy, and red-eyed most of the time, and reacted strongly to a number of foods. He also got sick a lot because the toxins he breathed were stressing his immune system. When he switched jobs and escaped the constant assault of airborne pollutants, his sensitivity to foods decreased dramatically. His progress on the False Fat Diet accelerated tremendously when he quit his job, and he soon lost almost all of his false fat and most of his true fat. Simultaneously, he stopped having frequent minor illnesses.

If any of these risk factors apply to you, you are vulnerable to food reactions.

You are not just what you eat.
Fat can be caused by many factors.
Food is just the most obvious one.

Now I’ll tell you how food reactions develop within your body, after you engage in these risk factors. Once you understand how food reactions work, you’ll be better able to stop them — forever.

And More: “An Internal Error Occurred When Overlapped Buffer Is Full” in VideoStudio X10 [Error Workaround]

[This post is currently Text-Only for speed of Posting. I may return and add example Screenshots and more, Soon™]


Update 2017-05-02: While not a ‘Fix’ for this issue, I have done more testing and found what is essentially the issue

Go to “Update 2017-05-02


Just a quick bit of information, for those using Corel’s VideoStudio X10 to edit and render their video projects and running into this error…

I was working on trying to finish some of the many, many, many projects I have in various stages of completion, and ran into an odd error when trying to render a Project in VideoStudio X10. The error said only:


“An Internal Error Occurred When Overlapped Buffer Is Full”


This is somewhat odd, as this is more of a generic Windows Application error than it is a VS (VideoStudio) error. So, I went to the Official Corel Support Forums and did other online searching…






I found a lot of people who have experienced this error, but none that had any solutions, sadly.
So, it was Time To Go Troubleshooting! /maskandcape

Now initially, I was trying to render in 1080p using the more common MPEG-4 Part 10 (h.264/AVC) format. VSx10 offers GPU-acceleration (where it utilizes the power of the videocard), like many video editing programs do these days, to help render and compress the output – and the quality of MPEG-4 can be quite good for the size, when it comes to compression.

BOOM, the error pops up, interrupting the rendering process.
Okay, time to see what could be causing it.

First, I tried to render in the other Formats that VSx10 offered (MPEG2, WMV, etc) and nothing would finish rendering without this error – except for Windows Media Video format (WMV).

Since WMV does not require GPU-acceleration to render, I disabled all GPU-powered optimization in the Preferences of the application (disabling ‘hardware acceleration’ where I could). I was hoping this would render with other formats without acceleration (MPEG-4 does not ‘require’ hardware acceleration, for example, but it renders much faster with it). Still, the error came up in any other format than WMV…

So, to dig in a bit of a different hole than the WMV format to find answers, I took out all elements of the Project except for the first video files (taking out the audio files, the Text added, images, etc) and tried to render again. It worked!

I then added in the Text elements (made with Corel’s built-in Title tools). It worked!

Since it worked with Text and all video files now, I added in the Audio Files.

BOOM, the error popped up again.
That’s okay, it’s progress – now we know that something related to the Audio is having troubles.

I was looking at the Audio Files and noticed that I had some ‘Audio Filters’ and ‘Speed/Time-Lapse’ adjustments on them (to help them synchronize somewhat in the Project), so I took those effects out and tried to render again. It worked!

Okay, so since it works with the Audio Files present – without ‘FX’ on them – then it might have something to do with the Filtering/effects…
I enabled only the Speed/Time-Lapse adjustments and left out the Audio Filters for the Audio Files that utilized them. It worked!
I then enabled the Audio Filters again and BOOM, the error reared up and roared in my face.

So, it appears that there may be something with the Audio Filters in VideoStudio that does not play nicely when you go to render the Project (for those experiencing this problem..). Nothing but WMV would produce output for me, at the time of this posting (this is with VideoStudio X10 Service Pack 1).


My advice then, is to try to utilize audio files that do not require Audio Filters in VSx10, for now (until the source of this problem is fixed in full).


If you must apply some sort of affects or filtering, there are many audio editing tools out there that can be used, at least until this gets looked at/fixed someday. Some suggestions off the top of my head are:

  • Sony’s Sound Forge (recently acquired by MAGIX, I think).
    This is a pretty capable application, with lots of effects, pitch shifting, fading and filtering available – I have used it a lot in the past when it was run by Sony. It costs some money, however.
  • Audacity.
    This is a free (Open Source) audio editing application that is popular and has many of the features and filters that Sound Forge has – I have used this too, before I could afford to buy any editors at all.
  • Adobe Audition.
    Adobe acquired the older-but-popular Cool Edit Pro audio editing program, which I personally used to use and like. I have not used it since Adobe took over, so I cannot vouch for how this one is – I assume that it is similar to how CEP was – which was quite capable. It is not free, however.


For now then, I will bring this up with Corel Support and see what they have to say about it – until this gets ‘fixed’, avoid utilizing Audio Filters in VideoStudio, if you can – for now…


Hopefully this information will be of use to those who, like me, were running into this annoying error in an otherwise decent video editing application – and hopefully it gets fixed soon!


If I remember, I will come back and Update this Post when a ‘Fix’ has been released!



Update 2017-05-02: While not a ‘Fix’ for this issue, I have done more testing and found what is essentially the issue with Corel’s VideoStudio x10 and how it handles some Audio formats (sample rate / bit depth). I am in contact with Corel Support at this time via e-mail, discussing this issue.




Here is what I have found after further testing:


I did some further testing on the audio files, looking at their specific properties. 
I found that the files giving this error were in 24bit depth, 96000Hz format. 

Just to experiment/investigate, I converted the audio file to 16bit depth, 44000Hz format (Standard Compact Disc Audio WAVeform format) and it worked! 

Here is what I found then, during more testing on the bit depth:

– 16bit audio file = Audio Filters and Speed Adjustment can both be used at the same time
– 24bit audio file = Only one or the other can be used at a time

Both Audio Filter and Speed Adjustment added = Error with 24bit audio file at 96000Hz sample rate
(I found that the 24bit depth audio files were also 96000Hz..)

Testing 24bit audio files at 44000Hz resulted in NO ERROR = it worked
(when using both an Audio Filter and a Speed Adjustment at the same time)

The error was repeatable however, with a 96kHz 24bit audio source file (having both a ‘trouble’ Audio Filter (one of those three listed above) and a Speed Adjustment on it).

Although this is not a ‘game breaking’ issue (I personally don’t mind converting any of my 24bit audio source files that are at 96kHz into 16bit depth versions but it is more work), this may be an issue for more novice users, who may not know how to do so. 
[Hmm, maybe I will make a Quick Tip on this, to help those people out…]

Related to this, many commercially available Samples (sound source files) are distributed to the customer as 24bit audio files, for higher fidelity. 
(Example: I purchased Sample Packs from Sony Creative Software and they came in a bundle as 24bit audio files. Another purchased Pack from BigFishAudio also had the source files being delivered as 24bit sources)
If any of those are at 96kHz (I see that most are at 44kHz anyway…), then it may bring up this issue. 

I realize too that it may be my machine, or my specific combination of hardware, interacting (CPU/Sound/etc) and also there does not seem to be many 96kHz 24bit audio files floating around in general usage (from what little I have seen, perhaps there are, but as I stated above, commercially-purchased packs seem to come in 44kHz 24bit format, at most).

Although this is not a ‘Fix’ directly dear readers, hopefully this information can help you VideoStudio users to avoid it, ‘stepping around it’ at least, for now – and perhaps this testing and information can even be utilized improve VideoStudio for the future… (I am in contact with their Support now, discussing these occurrences).






[Note: I am not affiliated with Corel or any of the other companies mentioned herein. I have not and I will not receive any compensation of any kind, for mentioning VideoStudio here. I am merely a user of the product and have used many of the other products mentioned above, including other video editing programs, not omitting Open Source / Free applications. I simply share information I have discovered, in hopes that it will help others.]

the 2018 La Jolla Concours Best of Show award was presented to the Mullin Automotive Museum for their 1939 Bugatti Type 57SC Aravis Cabriolet.

The Mullin Museum is a must see, they have an incredible collection of Bugatti. Probably the 2nd best collection you will ever be able to see, and probably the only Bugatti collection in the USA available to the public.

http://justacarguy.blogspot.com/2012/01/mullin-museum-what-it-looked-like-from.html  for a quick look

http://justacarguy.blogspot.com/search/label/Mullin%20Museum  for all the galleries from when I was there in 2012

and for a more thorough gallery of this car http://justacarguy.blogspot.com/2011/12/beautiful-bugattis-from-mullin-museum.html  and that’s why I didn’t take another set of photos… there isn’t much reason to look at two sets of the same car.

Essential fats

If you have been doggedly avoiding fat in an attempt to lose weight — this approach is WRONG. You need fats in your diet. Your brain consists mostly of fat, and your intelligence, heartbeat and muscular movements all depend on it. The only way in which your body can send electrical messages through living tissue is via your nerve cells and their connectors, which again are made of fat.

The fact is that some fats (known as lipids) are essential. They act as the second energy reserve behind glycogen, providing most of their energy at around 70 per cent of maximum heart rate. Endurance athletes utilize fat as an energy source more than other sports people and this is why they tend to be lean.

Fats are not just for energy, though. Their many other functions include insulating important organs, carrying fat-soluble vitamins and regulating hormone levels. If you’re a female athlete and you experience a loss of your periods, this may be due to extremely low body fat, for this plays a vital role in the activation of the female hormone oestrogen.

Fats also contribute to health in many other ways — provided they are of the right kind. In an attempt to warn people about the risk of consuming toomuch fat, certain groups have created the impression that all fats are bad, but this simply is not true.

Diet Start

Are you eating the wrong fats?

Many people in the Western world are getting 45 per cent of their calorific intake from fats, but these are junk fats that the body cannot use, so these people are just as fat-deficient as those on extremely low-fat regimes.

THERE ARE TWO MAIN TYPES OF NATURAL FATS:

1. Saturated fats come primarily from animal sources such as meat and dairy products, and from coconut and palm-kernel oil; they are solid at room temperature. They provide the body with a stored form of energy in fat cells.

2. Unsaturated fats are found in vegetables, nuts, grains and seeds, and in fish and game; they are liquid at room temperature. They contain two fatty acids that are essential to life and, more importantly, that the body cannot produce itself. These are linoleic acid (omega-6) and linolenic acid (omega-3) From these two ‘essential fatty acids‘ your body can make all the other fatty acids it needs.

Is it just a case of cutting out saturated fat?

Saturated fat gets a bad press, and a diet too heavy in it has been closely linked to cardiovascular disease. However, there is another fat with an equal capacity to harm: hydrogenated fat.

Hydrogenated fat is solid or semi-solid at room temperature (the best example being margarine). It is created when a liquid oil (such as corn oil) has hydrogen added to it, changing its chemical structure. This in turn can interfere with the metabolism of some essential fatty acids. Research has shown that the trans fats in hydrogenated fats can increase LDL (poor) cholesterol,decrease HDL (good) cholesterol and thus raise the risk of coronary heart disease. Hydrogenated fat is found in almost all processed foods, plus frozen convenience foods and deep-fried fast food. This is another good reason to say goodbye to junk food and hello to fresh produce.

If you usually ingest high amounts of processed fats and use commercially altered oils for cooking, then you are certainly not getting the balance of fats that your body needs.

Why don’t food manufacturers use healthier oils?

Even though the food industry uses vegetable oils that contain a reasonable amount of omega-6 fatty acids, they avoid omega-3s because these are more susceptible to oxidization — in other words, they go rancid quickly and don’t have a long shelf life.

Ironic, isn’t it? Food manufacturers quite happily promote food under the guise of lowering cholesterol and reducing heart disease, but they are ignoring one of the fats essential to health. So unless you are eating high amounts of fish, fish oils, leafy vegetables, nuts, unrefined olive oil, tofu or flaxseed oil, your ratio of omega-6 to omega-3 fats is probably screwed up, and this in turn will be screwing up your health.

The current Western diet is much higher in omega-6 fatty acids than omega-3’s. Remember those healthy Palaeolithic people we were discussing earlier? They were eating equal amounts of both.

How is this relevant to body weight?

If you are eating a diet with a good balance of omega-6 and omega-3 fatty acids, this will affect your body in beneficial fat-burning ways:

  • Your metabolic rate will be increased, as will the metabolism of fats, so more stored fat will be burned for energy
  • Your cells’ sensitivity to insulin will be increased, so that it regulates blood- sugar levels more effectively
  • The ratio of insulin to glucagons will improve, which will unlock the fat- storage banks and again allow fat to be burned as energy
  • Natural appetite suppressants will kick in.

So if you want to improve your chances of losing weight, you need to up your intake of omega-3 and other healthy fats.

Essential fats Q&A

Q. How often should I eat oily fish per week if I want to consume enough omega-3 fatty acids?

A. You should aim to eat oily fish a minimum of 2-3 times per week, or ensure you use flaxseed oil regularly on salads to raise your levels. Try to eat fish from as safe a source as possible as many coldwater fish are contaminated with heavy metals and pesticides.

Q. How can I avoid hydrogenated fat?

A. Cut out processed food and only use cold-pressed un-refined oils such as olive oil, or coconut oil for cooking. Don’t eat fast food that has been deep-fried and avoid butter type spreads. If you did this, then you should be able to avoid consuming dangerous trans fatty acids.

Back to School – Math Edition

It might be time to think about renaming my blog, because I’m really excited about teaching math this year! It all started when I read the book Number Talks over the summer.

I’ve always understood the importance of mental math and computation strategies, but I’d never really understood how to teach it. It felt like something kids either had or they didn’t. This year, however, I decided that we’d start doing number talks from day #1, and I’m already blown away by how my students are developing as mathematical thinkers. They’re able to solve complicated addition problems in their heads — no paper allowed — and they’re articulating their strategies well. I’ve been introducing a new strategy every 2-3 days, and it’s been awesome. We’ll be moving on to subtraction strategies in a few days, and I have high expectations for that to.

To help students with the mental math strategies, I made a set of posters that describe each strategy with an example of how it works. There are 20 posters in all — one for each strategy described in the book.

The complete set is available in my TpT store, and they’ll be on sale for 28% off this weekend as part of the Teachers Pay Teachers back to school sale if you use the code BTS13.

As I’ve been working on order of operations and number sense with my fourth graders, I also introduced the four fours problem. The premise of the problem is this:
Using some arithmetic combination of four 4’s, can you write an equation for each of the numbers from 1-100? Here are the rules:
  • You may use any combination of addition, subtraction, multiplication, and/or division
  • You may combine numbers, e.g., use 2 of the fours to make the number 44
  • You may insert decimal points
  • You may use a four as an exponent
  • You may use square roots
  • You may use factorials, e.g., 4! is equivalent to 4 x 3 x 2 x 1 = 24
  • You may use overbars to make a decimal repeat
  • You may NOT use any digit other than a four
  • You MUST use all four 4’s in each solution

Before I go on, let me give two caveats. 1) I didn’t expect all of my students to be able to handle all of these rules. Square roots, exponents, and factorials are WAY above my fourth graders heads generally, but I did have a handful that could handle it. And there are plenty of solutions to be found that don’t require those operations. 2) This problem freaked out the parents more than it scared the kids, I think. I had a few panicked parents that I had to talk down while we were working on this, but in the end, it was well worth it. My students were so excited about math and problem solving as we worked through this problem. It was homework each night to try to find a few more solutions, and then we’d add to a chart during math class. Look at all that my students accomplished after just two days!

We’ve filled in a bunch more solutions since then, but of course I left my camera at school this weekend…
Finally, in honor of the big back to school sale on TpT, I’ve bundled four of my favorite math resources into a back to school math pack for this weekend only. 
Sold separately, this is $17 worth of products that I’m selling this weekend for $10, but after Monday, the bundle will no longer be available in my store. So if you’ve had any of these on your wish list…

Hope everyone had a great week! I’m still learning how to juggle grad school with teaching, but I’m hopeful that I’ll still be posting at least once a week.

Off to start catching up on blog reading and filling my cart for the TpT sale! Have a great weekend!

My Trip to Bangladesh June 2011. Cont…..

The assignment is now over; managed to progress the milestones without much trouble given that I lost a total of 4 days to strikes. The draft evaluation report was well accepted by the client; now comes the tricky part getting comments on the report. There are basically 2 types of comments that a consultant is likely to get on a report. The first being, comments regarding the structure / formatting and style of the report and some times regarding the language. We have all had different educations and are used to a particular vocabulary; further at some point in our lives we have written a report and we generally stick to that structure while accommodating subject related topics. My rule of thumb is that I give in to these requests as it is just not worth the discussion regarding it. I prefer to use that time for some thing else. The second being, comments regarding the contents such as findings, recommendations etc. Here I generally play hard ball, unless I am presented with an argument backed by facts / proof. This goes to the hart of your position as an independent, unbiased professional consultant. I look forward to these comments as they challenge your thinking and help you to be a better consultant as well. I am supposed to get all the comments by next Friday as the end of the assignment / submission of the final report scheduled after 2 days of receiving all the comments.
During my last week in Dhaka my health deteriorated (food poisoning). My fault for eating some pastries (short eats) offered to me during a meeting. Momentary laps of concentration. . I have been coming to Bangladesh since 2006 and this is the first time this happened to me. My dread was the journey back to Colombo which I made with the aid of Imodium. I know this drug is banned in some countries but it is a life saver when traveling.
I do not have any other assignments lined up at this moment. Now that I am back in Colombo I need to tie up some outstanding issues. These are in fact 3 reports, 1) finalizing the report for the current Bangladesh Assignment, 2) finalize the Strategic Plan for my client in Batticaloa and 3) Submit a reflection I did for myself for the institute of consulting.

Tempura Mazel

Tempura is a Japanese dish. Tidbits are dipped in a batter of flour, water, and egg yolk, sizzled to golden in hot fat (by all means, use your wok for this if you have one), drained, and artistically arranged and served, usually on a doily-lined flat basket. The consistency of the batter (which must be neither too thick nor too thin) and the temperature of the oil (350° is just right) are of the utmost importance. Tempura cannot wait; it must go directly from wok to table.

Diet Start

  • 5 asparagus, cut into 2 or 3
    long diagonal pieces
  • 1-2 large carrots, sliced 1/4″ thick on diagonal
  • 10 green beans, ends trimmed
  • 2 small zucchini, cut into thick sticks
  • 1 bell pepper, cut into strips, pith and seeds removed
  • 6 shitake mushrooms, soaked in warm water
  • 6 large parsley sprigs, stems removed, dried
  • 4 Nori seaweed, cut into quarters (available in Japanese markets)

Clean and cut vegetables; make certain they are dry.

Batter:

  • Ice water
  • 21/4 cups flour
  • 3 egg yolks
  • 11/2 quarts safflower oil (more if using sauté pan)

Gradually add ice water to flour with a whisk till mixture is the consistency of heavy cream. Beat yolks and whisk into mixture.

Heat oil to 350° in wok or large sauté pan. Dip vegetables into batter and fry till golden (1-2 minutes). Do not crowd pan. Drain.

Chilis Mazel

  • 6 fresh green chilis
  • 1 recipe Mazel Cheese Mexican, warmed
  • Ice water
  • 3/4 cup flour
  • 1 egg yolk
  • Safflower oil to deep fry (about 11/2 qts.)
  • 1 recipe of cooked Salsa Mazel

Slit chilis lengthwise, just long enough to stuff with Mazel Cheese Mexican. Clean out seeds, etc. Stuff with Mazel Cheese mixture and set aside.

Gently whisk enough ice water into flour to make it about the consistency of heavy cream. Beat yolk with a fork, then whisk into batter.

Heat oil to 350°. Dip each chili into batter. Cook in oil till golden (1-2 minutes)

Drain on paper towels.

Served cooked salsa over chilis.

YIELD: 2 servings.

The timing on deep frying is difficult to pinpoint. Variables include size of pan, the amount of oil used, temperature of oil, desired color of finished product, etc. Do not crowd pan.

Reverse Lunge with Diagonal Lift

Lunges are a fantastic functional lower body exercise, and the benefits can be enhanced by adding an upper body component to the basic lunge movement pattern. One of the most productive total body lunge variations is the reverse lunge with a diagonal lift.
The exercise improves hip mobility in the front of the rear leg, while also increasing strength and stability in the front leg and increasing core strength and mobility. Specifically, it improves hip flexor mobility while training the body to move smoothly in the spiral line. It also encourages proper tri-planar movement.
Start standing with feet shoulder width apart in upright posture. Hold a medicine ball, dumbbell, or kettlebell (or even a body bar) positioned at the right hip pocket region. Step back with the right leg to perform a reverse lunge. At the same time move both arms diagonally up and back over the left shoulder until a comfortable stretch is felt in the anterior (front) of the right hip. Do NOT allow the back to arch. Pause in this position for one or two seconds.
Do 10 – 15 repetitions on one side then repeat on the other side. It is important that you keep both feet facing forward and keep your trunk upright throughout the movement.
Regressions:
Perform the movement without a medicine ball, dumbbell, or bar
Start in the split stance lunge position instead of having to step back
Progressions:
Increase weight you are holding.
Perform the movement in an alternating side manner vs one side at a time.
Video Links: https://www.youtube.com/watch?v=JDyGhcm-aVs

Reading in the Wild – Chapter 1

I absolutely loved Donalyn Miller’s book The Book Whisperer: Awakening the Inner Reader in Every Child, so I was very excited to see that she released a new book – Reading in the Wild: The Book Whisperer’s Keys to Cultivating Lifelong Reading Habits AND that Catherine over at The Brown Bag Teacher has organized a summer book study of it.

Chapter 1 – Wild Readers Dedicate Time to Read

Already, this book has lots of ideas that I can integrate into my classroom. In fact, I suspect that I will re-read each chapter just to make sure I’m recording all of the ideas so I remember them in August. (And I may go back and re-read The Book Whisperer, too!) But one thing that I really want to emphasize this year is building a community of readers. I like the idea of students sharing the books they’re reading and making recommendations to each other. Personally, I use GoodReads to track that information for myself (I’ve blogged about that before here). I’ve also had my students blog about their reading (see here). But what I’d really like is something more like GoodReads – a social networking site – but appropriate for fourth graders. 
I recently stumbled across the site Reading Rewards through a Twitter Chat, and this might be the answer I’m looking for. 

This site allows you to set up your class into a reading community where they can create libraries of the books they’ve read, write book reviews, get and make recommendations, and make a wishlist of books they want to read. There is also a reading log component and a reward system that allows you and parents to create rewards based on achieving individualized reading goals. I haven’t had a chance to try this out with students yet, but based on my exploration of the site, it looks very promising.

Do you have any experience with the Reading Rewards website? Have you come across any other sites you’d recommend for building a community of readers? I’d love to hear about it in the comments.

How to Overcome a Negative Habit



Habits are powerful.  Unfortunately, they often are created outside our consciousness and without our permission. However, we can consciously change habits. Habits shape our lives far more than we realize— they are so strong, in fact, that they can cause our brains to cling to them at the exclusion of all else, including common sense.
At the same time, positive habits can change our lives for the better. So how are habits created and what can we do to influence them in ourselves and our clients?
Three Parts of a Habit
The Cue: a situational trigger that is based on a reward you are seeking.
The Routine:  a physical or emotional action you take to obtain the reward.
The Reward:  the satisfaction you get by following the habit.

The Steps to Changing a Habit
Identify the Routine:  You must identify how you go from a particular cue to the routine of the habit and the reward it gives you.
Understand Cravings and Rewards

The first part of a habit is the cue, but before the cue there is some type of craving.  Cravings drive habits.   Understanding cravings is key to figuring out habits.  In a habit, there is a specific reward that satisfies a particular craving.    In other words, figure out what you are getting from the habit because you ARE getting something from it!
Rewards are powerful because they satisfy cravings. But we’re often not conscious of the cravings that drive our behaviors. For example, when developing the air freshening product Febreze marketers discovered that people craved a fresh scent at the end of a cleaning ritual.  They found a craving that people were not aware of.     This craving is so strong that without added scent most people do not get satisfaction from an air freshener that just removes odors from the air – they have to smell the scent!   It is exactly the same phenomenon with breath freshners which can be made to eliminate odor WITHOUT any taste/scent, but no one buys them!
Most cravings are like this: obvious in hindsight, but difficult to discern when they are in control of your behavior. It is critical to discover the cravings that drive habits to be able to change or create habits!   To figure out which cravings are driving particular habits, it’s useful to experiment with different rewards. For example, say your reward is having a cookie after studying every night.  The next time you study deliberately substitute something else for the cookie such as going for a short walk or having a cup of tea instead. 
The next time eat an apple and another time change call a friend for call, etc. What you choose to do instead of eating a cookie is not important.  The key is to test different hypotheses to determine the exact craving that is driving your routine.   Are you craving the cookie itself, or a break from work? If it’s the cookie, is it because you’re hungry? (In which case the apple should work just as well.) Or is it because you want the burst of energy the cookie provides? (And so coffee may work just as well.) Or is it where you eat the cookie and who you are with?  Do you go to a specific place to get and eat your cookie?  If so maybe the real craving may have to do with a desire to socialize.  
As you test four or five different rewards, use this technique to identify patterns.  After each activity, note the first three things that come to mind after your reward behavior. This can be emotions, random thoughts, reflections on how you’re feeling, or just the first three words that pop into your head. Then, set an alarm on your watch or computer for fifteen minutes. When it goes off, ask yourself: Do you still feel the urge for that cookie? The reason why it’s important to write down three things— even if they are meaningless words— is twofold. First, it forces a momentary awareness of what you are thinking or feeling.
By experimenting with different rewards, you can isolate what you are actually craving, which is essential in changing a habit.
Determine the Specific Cue for the Habit

This is the trigger that initiates the craving for the reward.   So it is very important to learn the cues for habits.   Common cues including being in a particular place, being with a particular person, a particular time of time of day, a specific emotional state, etc.    Asking yourself these five questions can be very helpful for identifying cues:
Where are you when the urge for a reward hits you?
What time is it?
What is your emotional state?
Who else is present?
What did you do right before you had the urge?
Have a Plan!
Once you understand the habit you want to change you need to create a plan to change the habit!   The easiest way to do that is have a specific plan of action whenever you experience the cue or cues.    For example, if you smoke when you have coffee know this and plan to do something else deliberately whenever you have a cup of coffee.   The plan is key or you will slip right back into the old routine.
Another example is having a few beers every night when you get home.  Through the first three steps you discover that having the beer helps you relax after a stressful day.    You also learned that going for a 20-minute walk or doing Tai Chi gives you that same reward of feeling relaxed.   So now you plan to either go for a walk or do Tai Chi ever day as soon as you get home (or even better before you get home!).

Ten Risk Factors That Cause Food Reactions (1-5)

The primary cause of most food reactions is incomplete digestion. At almost every meal, we eat foods that we don’t completely digest. The results are disastrous. When we eat foods we can’t digest, we almost always have some type of reaction.

Food that isn’t completely digested can enter our systems in large food macromolecules that cause a great deal of trouble. The body perceives these macromolecules of partly digested food as foreign invaders, similar to bacteria, viruses, or parasites. Then the body attacks them with the full force of the immune system.

This immune inflammatory attack creates the symptoms that you hate: fatigue, weakness, heartburn, aching joints and muscles, nasal stuffiness — and false fat.

There are several factors that most often cause incomplete digestion. To get started on the False Fat Diet, you’ve got to understand these factors and avoid them. In order of importance, here they are.

Risk Factor 1. We eat too narrow a range of foods.

It’s estimated that the average person gets about 75 per cent of his or her calories from just ten different foods. Most of us have our favourite foods, such as wheat and dairy products, and we rely on them far too much. When we overeat any one food, we exhaust our body’s ability to fully digest it.

Diet Start

Risk Factor 2. We eat too many fake foods.

We eat synthetic foods, such as fake fat and artificial sugar, that are manufactured in factories. No wonder we can’t digest this stuff! Furthermore, most of our packaged foods have been crammed with chemicals that human bodies cannot adequately metabolize. Often, a synthetic food has a long shelf life precisely because it can’t be broken down by nature.

Risk Factor 3. We have digestive enzyme deficiencies.

Many people are dangerously low in the enzymes that digest food. Even when these people eat healthy foods, they don’t have enough pancreatic enzymes to break the foods down properly.

Millions of people haven’t been genetically endowed with the right digestive enzymes to thrive on a modern, industrialized diet. For example, African Americans are ten times more likely than Caucasians to lack the enzyme that breaks down milk. Because a lack of enzymes is a common problem, the False Fat Diet generally includes supplementation with specific enzymes.

Another cause of enzyme insufficiency is our failure to ingest the natural enzymes that exist in foods. Many whole, unprocessed foods automatically come with the enzymes that are needed to help digest them, but before we eat these foods, we often kill the enzymes by cooking, processing, irradiation, and storage.

Because it’s important to eat foods with live enzymes still in them, patients on the False Fat Diet tend to eat a lot of fresh, whole, raw foods.

Another critically important digestive substance that millions of people lack is stomach acid, or hydrochloric acid. Unfortunately, production of this acid decreases as we age, which is why indigestion is more common among older people. Many people mistakenly think they have too much stomach acid, because they often get heartburn — but the opposite can be true. Heartburn can also be a sign of low acid. When you don’t have enough existing stomach acid from day to day, your stomach secretes too much when you eat to make up for the deficiency. Later on, I’ll tell you how to fix this deficiency.

Risk Factor 4. We eat food that is too refined.

Too much of our food is stripped of fibre and then shredded, pulverized, powdered — and finally stuck back together again with gluey fillers. By the time we eat it, it’s not much more than a predigested mush of starch and sugar. Unfortunately, this excessive processing often allows the food to rush into the bloodstream before it undergoes the complete digestive process. If this ‘predigested’ food still had its fibre, it would stay in the gut long enough to be fully digested, or it would be carried all the way through the system by the fibre and eliminated. Because of this factor, I urge people to avoid overly refined foods.

Risk Factor 5. We create our own intestinal problems.

One of the most common and harmful of these problems is a condition that allows undigested food macromolecules to slip through the intestinal wall. This condition is called ‘leaky gut syndrome,’ and doctors have only recently realized how hazardous it is. A leaky gut‘s wall is more permeable than it should be.

This permeability can be caused by eating chemical additives and also by drinking coffee or alcohol with meals. If you’ve noticed that you most frequently have food reactions when you have a cocktail with dinner or coffee with breakfast, you may have leaky gut syndrome.

Another primary cause of leaky gut syndrome is overgrowth of the natural yeast Candida albicans. Candida is usually present in the body and is mostly found in the mucous membranes — especially those in the intestines. It normally stays in balance with other healthy bacteria, but it can get out of control and increase gut wall permeability. It proliferates if you:

  • Take antibiotics, which kill all bacteria.
  • Take birth control pills.
  • Take steroid drugs.
  • Eat foods, such as sugar, that cause yeast to multiply.
  • Eat things that contain lots of yeast, such as bread and beer.
  • Have impaired immunity.

Candida is a major cause of bloating and often causes a ‘beer belly’ look. In fact, I think that many heavy beer drinkers with beer bellies aren’t nearly as far as they look, but are just swollen with candida, reactive gas, and fluids. I had one patient who lost his beer belly in a matter of days on the False Fat Diet. He was thrilled with his quick response, and it motivated him to stay with the diet.

The “Basic Seven” Foods

1. Green and yellow leafy vegetables. These may be used either cooked or raw, fresh or frozen. They include cabbage, lettuce, broccoli, sprouts, asparagus, spinach, celery, and similar greens. These provide vitamin A to protect eyes and skin and to guard against infection. They also provide iron for the blood and roughage for elimination.

2. Fruits—at least two each day. One may be an orange or some other citrus fruit. Another may be a banana, tomato, apple, pear, peach, a bunch of grapes, or some tropical fruit. For variety use strawberries, canteloupe, or some type of melon. These fruits provide vitamin C, which is essential for strong blood vessels and healthy gums and teeth. They also provide roughage for better elimination. Fresh fruits are best for these purposes. Heat destroys vitamin C.

3. Potatoes and other vegetables. Two or more servings should be eaten each day. These include Irish potatoes, sweet potatoes, yams, beets, carrots, parsnips, lentils, onions, peas, beans, soybeans, and many more. Vitamins and minerals are present in all vegetables. Potatoes are a good source, especially when cooked in their skins. Vegetables may be used in various ways. Raw carrots are an excellent source of vitamin A. Vegetables provide bulk, which aids digestion.

Diet Start

4. Milk and dairy products. The very minimum for an adult should be a pint a day, or more, and a quart a day for each growing child or pregnant mother. Nursing mothers need even more. The milk may be in fluid form, as whole milk, buttermilk, skim milk, canned or evaporated milk, condensed milk, dried milk, or some form of cheese. One ounce of cheddar cheese is equal to a cup of milk. The milk can be used as a beverage or in cooking, such as soups, puddings, and desserts. Milk is a fine source of protein. It also provides minerals, vitamins, and especially calcium, which is needed for bones, teeth, nerves, and muscles.

5. Protein foods. Foods that are rich in proteins include beans, peas, soybeans, nuts, peanuts, eggs, meat, or fish. Soybeans are the richest source of proteins known. They are far richer than eggs, liver, kidney, or any other meat products and far less expensive. They have been used in the Orient for many generations. Dried peas, beans, lentils, and peanuts are all similar to meat in food value.

6. Whole-grain breads and cereals, at least two or three slices of bread and one dish of cooked cereal each day. These are particularly valuable for growing children and adults who work hard. Whole grains include wheat, rice, barley, corn, and other grains. “Enriched white flour” is better than ordinary white flour, but it is still lacking in certain essential elements. Grains and cereals provide calories for energy, as well as vitamins, minerals, and roughage. Whole grains, freshly ground, are best.

7. Butter, cream, fortified margarine, or other vegetable fats. A certain amount of fat is essential in every diet. Salad oils, olive oil, corn oil, and similar products may be substituted to meet the daily requirements for fat in the diet. Fats provide calories for heat and energy. They yield more than twice as much energy as carbohydrates.

Other foods rich in fats are egg yolk, vegetable oils, olives, nuts, and soybeans.

These are the “basic seven” food groups. One or two from each group should be included in the diet of the whole family every day. The quantities need not be large. The wider the variety, the better. Serve each food attractively. Eye appeal is always important.

In considering the “basic seven,” you will notice that there is no mention of white sugar, spices, or condiments. None of these is essential in the diet. Ordinary white sugar does provide energy, but that is all. There are no vitamins or minerals in refined sugar.

In addition to these “basic seven” food groups one should include at least six to eight glasses of water each day. Water is necessary for removing wastes from the body. It aids in maintaining a normal temperature and in moistening the air we breathe. We do get some water from our foods, but not nearly enough to supply all our needs. Many who complain of sluggishness, fatigue, and nervous headaches would feel better if they were taking more water. It is best to drink between meals. Drinking water should be pure and free from harmful germs. If in doubt, boil the water before using it.

Over two thirds of the human body is composed of water in some form or other. This means that a person weighing 150 pounds has more than one hundred pounds of water in his physical make-up. Even the bones are one-third water. Without sufficient water, the blood cannot circulate properly. Nor can the digestive organs work as they should. All the cells need water. This is the remarkable fluid in which myriads of chemical and electrical reactions are taking place all the time.

A reliable supply of pure water is essential to the life and health of every family. One may live quite a while without food, but not more than a few days without water. There is no substitute for water. It is indeed the liquid of life. Those who follow the “basic seven” in their choice of foods and include a generous supply of pure water need never fear. They will be taking a balanced diet, and they will feel the benefits of good health all their lives.

The Nordic Hamstring Curl: Best Hamstring Exercise You are Not Doing!

There are many different hamstring exercises including variations of leg curls (seated, prone, and standing) along with several different hip hinge exercises that target the hamstrings (RDL, Single Leg RDL, etc).     These are all great exercises, but none of them can touch the Nordic Hamstring Curl for building eccentric strength and preventing hamstring injury in sprints and sport!
This is a tough exercise so warming up the hamstrings is essential.  Using other hamstring exercises first such as bodyweight hip hinges and light leg curls on a machine prior to this exercise do the trick nicely.   It is also a good idea to do some static stretches for anterior hips and hip flexors to shut them off which helps to allow for maximum hamstring activation.
To perform the Nordic Hamstring Curl you need to find a place to hook your heels under when you are in a double leg tall kneeling position so you will also need padding under your knees.     If you have a workout partner you can have them kneel behind you and hold onto both your legs right above the ankles keeping their arm straight so they can use their bodyweight to apply load as you let your body fall forward like this:   http://willlevy.com/wp-content/uploads/2014/08/Nordic-Curl.jpg.     You can also find something to hook your ankles under like the horizontal bar from a weight machine or barbell like this:   https://i.ytimg.com/vi/f_GdZKdwovA/maxresdefault.jpg or  this:   https://s-media-cache-ak0.pinimg.com/originals/29/04/34/290434956cdd220cc8d6e0b18948cf3c.jpgor this:  https://www.t-nation.com/img/photos/2013/13-775-04/Nordic-Start.jpg
Keeping your hips flat (straight line from knees through hips and shoulders) – you lower your body down slowly until you can no longer hold your weight then catch yourself in push-up position and push back up:  https://simplifaster.com/articles/wp-content/uploads/sites/5/2017/03/GHR.jpg.       You can also use a band during the exercise which provides progressively more assistance as you go lower towards floor to allow you to potentially perform the full range of the motion and come back up with the assistance of the band.    Then over time you gradually decrease the assistance of the band by user smaller and lighter bands.      This provides a good video of how you can do this by attaching a band overhead and behind you:  https://www.youtube.com/watch?v=LQm9rdzZlRk
There are also numerous machines designed for this exercise including:
http://www.roguefitness.com/floor-glute?prod_id=15905&gclid=Cj0KEQjwnazLBRDxrdGMx-Km4oQBEiQAQJ1q68P3rah0ZwofpsxOA-xSYl5_v9mtTSxSmuG5zIW1KUYaAvPW8P8HAQ
http://www.speedbottraining.com/glute-ham-machine/
http://www.gluteforce.com/
Here is a 6 week progression:
Week                   Sessions/Week                  Sets                       Reps                     Rest
1                                           1                            2                            5                            2 min.
2                                           2                            3                            5                            2 min.
3                                           2                            3                            6                            2 min.
4                                           2                            3                            7                            2 min.
5                                           3                            3                            8                            2 min.
6                                           2                            3                            9                            2 min.

Number Talks Chapter 1 – Thumbs Up for the Silent Thumb

I’m linking up with my friend Misty over at Think, Wonder, & Teach for her summer book study of Number Talks: Helping Children Build Mental Math and Computation Strategies, Grades K-5

Given that I’m wrapping up a K-5 Math Endorsement this month, this is a timely book for me. I love to teach math far more than I ever anticipated that I would when I entered this profession, and I really enjoy getting students to share and discuss their mathematical thinking. I’ve noticed, however, that many students lack strong mental math and computation strategies, relying instead on memorization to get them by. By the time they get to 4th grade, that’s not really a viable strategy anymore. They’re starting to work with much larger numbers, and they subsequently have more parts and steps to keep straight in their heads. If they don’t have great mental math strategies going, then it’s likely to become a mess pretty quickly. They can always solve problems on paper, but unless they have the good number sense that goes with doing mental math, they’ll never be able to gauge the reasonableness of their answers. In those regards, this book seems like a great idea.

Chapter 1 really just introduces the concept of a number talk, and Misty does a great job summarizing it, so I won’t go into that here. One of my favorite teaching ideas from the book so far, however, was the idea of the “Silent Thumb.” When students are given a mental math problem, they need some “think time.” But every class has 2-3 students who are super math-letes who have the answer before the rest of the class has even processed what problem they’re being asked to solve, and those kids with their proud “I know! I’ve got it!” hand-waving typically end up dominating the conversation. The “silent thumb” solves that problem. All students hold their hand in a fist over their chest as they solve the problem. When they’ve got an answer, they move their hand from a fist to a “thumbs up.” They then think of another strategy to solve it while the other students are thinking, and for each additional strategy they come up with, they extend a finger. Awesome, right? I love how this gives all students some think time without creating pressure for some kids to hurry up because the fist is held close to the body — not waved in the air for everyone else to see. It also validates those super math-letes for their mathematical thinking by allowing them to communicate to the teacher that they have multiple strategies for solving the problem. And if they don’t have multiple strategies, then they have something to think about while the others are working.

I’m definitely interested in learning more about Number Talks, and I’m excited to delve into this book a bit more. I’ll be posting more about this book in the weeks to come as I link up with Misty’s book study.

If you don’t currently have a copy of Number Talks, you can still read the first chapter online. The book is a little bit pricier than most professional development books, but it comes with a DVD full of examples and it has a lot of resources packed in the text. If you’re looking to increase students’ mental math abilities, then this could be a great resource to use.

Be sure to check out Misty’s Number Talks chapter 1 linky party where you can add some ideas of your own or read what other teacher bloggers are saying about the book. I promise you’ll find some great ideas there!

And click here to see my review of Chapter 2!

Have you ever done Number Talks in your classroom? I’d love to hear about your experiences in the comments section!

Thanks for reading,

And More: Deals and Sales – End Of The Month Specials (February)

The transition from February to March this year isn’t seeing a ‘ton’ of games on special sales, but there are a few deals on almost every gaming/dealer website (some are only on for the weekend and some last until the middle of March, see each sale you are interested in for details):

Steam, Valve’s storefront has a Spotlight Sale of Sniper Elite: Nazi Zombie Army (1 & 2), which can be purchased together in bundles or 4-Packs to play with your friends and is their Weekend Deal:

Sniper Elite Nazi Zombie Army Sale Page
Sniper Elite Nazi Zombie Army 2 Sale Page

also on sale
Trine is on sale for only One Dollar (90% off), or get Trine 1&2 for $3.74
Warhammer 40K: Dawn of War II: Retribution is on sale for $7.59 (75% off)
Alternativa is on sale for only $1.29 (90% off)
The Sims 3 is on sale for $7.99 for those who haven’t played it yet (60% off)
Kung-Fu Strike: The Warriors Rise is on sale for only $1.99 (80% off)
Moto GP 13 is $12.00 (70% off)

Gamefly, the storefront that you can also subscribe to (that took over Direct2Drive in 2011) has a few sales going on, one featuring all 2K Games titles at 75% off:

(click image to see Full Size)

also on sale
Bioshock is $4.99 (75% off)
Bioshock 2 is $4.99 (75% off)
Bioshock Infinite is $9.99 (67% off)
Borderlands, Game Of The Year Edition is $7.49 (75% off)
Borderlands 2, Game Of The Year Edition is $19.99 (50% off)
Duke Nukem Forever is $4.99 (75% off)
Civilization V is $7.49 (75% off)

GamersGate, the storefront formerly part of Sweden’s Paradox Interactive has a bunch of sales going on as well:

(click image to see Full Size)

also on sale
Call of Juarez: Gunslinger is $9.72 (46% off)
with Battlefield 4 is out, Battlefield 3 is on sale for $4.99
Sniper Elite V2 is on sale for $7.50 (75% off) or get the
Sniper Elite V2 Collection (which includes: Sniper Elite V2, the Sniper Elite V2 Kill Hitler Pack, the Sniper Elite V2 The Neudorf Outpost Pack, the Sniper Elite V2 Original Game Soundtrack, and the Sniper Elite V2 The Landwehr Canal Pack DLC) all for $13.75 (75% off)
The Tropico Trilogy Bundle (which includes: Tropico, Tropico Paradise Island, Tropico 2 Pirate Cove, Tropico 3, Tropico 3 Absolute Power) all for just $4.99 (75% off)
and last but certainly not least
The Total War Master Collection bundle (which includes: Empire: Total War, The Medieval 2 Total War Collection (M2TW and the M2TW Kingdoms Expansion Pack), Napoleon: Total War™ Imperial Edition
Rome: Total War Gold Edition, Total War Battles: Shogun, Total War SHOGUN 2, the Total War Shogun 2 E-Guide, Total War Shogun 2 Fall of the Samurai, and Viking: Battle for Asgard) all for $25.00 (80% off, regular price $124.99!)

Once again, some of these are only on for the Weekend and some last until the middle of March, so check out the sale you are interested in for details. I hope you catch something you want – and See You In The Games!

The weight question continue…

Take a health check .. .

Before you begin a new dietary regime or exercise programme, check with your doctor that your health status allows you to do so. A health check is vital if:

  • You are suffering from any ongoing health problems
  • You take regular medication
  • You are under 20 or over 65, because children, teenagers and the elderly have specific nutritional needs.

And a reality check …

If you do have a problem with your weight, stop beating yourself up over it. Being fat is not a sin or a criminal offence. It is simply a consequence of careless eating and lifestyle.

Diet Start

Even if you have tried every diet going, this one does not have to be the same. You are going to change your lifestyle and give up a few bad dietary habits. So, unless you have a medical condition that prevents you from losing weight, this approach will help you become slimmer and, more importantly, fitter.

Being overweight can undermine your self-esteem and the way you deal with situations. Losing weight won’t change the fact that you have money worries, an unsupportive partner or hate your job, but when the pounds start to fall away and you begin to feel better about yourself, you will deal with those issues very differently. Your confidence levels will rise and you will have lots more energy, which will help to make all of your problems seem more manageable.

Don’t be negative even before you start. This is not the problem you think it is – it’s the solution.

OBESITY AS A DISEASE – NOT A MORAL FAILING

`Obesity is a heterogeneous disease in which genetic, environmental, psychological, and other factors are involved. It occurs when energy intake exceeds the amount of energy expended over time. Only in a small minority of cases is obesity caused by such illnesses as hypothyroidism or the result of taking medications, such as steroids, that can cause weight gain.’

TAKING A HOLISTIC APPROACH

  • What you weigh is the result of several factors:
  • How much and what kinds of food you eat
  • Whether your lifestyle includes regular physical activity
  • Whether you use food to respond to stress and other situations
  • Your physiological and genetic make-up
  • Your age and health status.

Successful weight management should address all of these factors. That’s the reason for ignoring products that promise quick and easy solutions, or permanent results without permanent changes in lifestyle. Any product that promises that you can lose weight without lowering your calorie intake and/or increasing your physical activity is trading on fantasy and false hope.

Popcorn Cart, Warren, Ohio, circa early 1910s

https://www.facebook.com/neatoldphotos.m.lucas2/photos/a.400823796751664.1073741829.400758923424818/908779272622778/?type=3

My Trip to Baticaloa

On my way to Baticaloa, This was taken on the Polonnaruwa Habarana Road today (12/06/2011) @ 2.00 PM. Wow what a Jumbo!

The carb connection

Carbohydrates are a vital part of the human diet – they are our primary source of energy, and in their natural state they are turned into glucose to provide fuel for all the organs of the body.

THERE ARE THREE MAIN TYPES OF CARBOHYDRATES:

1. Simple sugars, or monosaccharides: glucose (blood sugar), and fructose (fruit sugar)

2. Double sugars, or disaccharides: lactose (milk sugar)

Diet Start

3. Complex carbohydrates, or polysaccharides: starches and cellulose (potatoes, rice, grains and dietary fibre).

The simplest carbohydrate of them all is glucose, which is assimilated immediately by the body. The more complex the carbohydrate’s structure, the longer it takes the body to convert it into energy – so ‘complex’ carbohydrates are the slow burners, because they are higher in more complicated sugars and fibre and thus take longer to break down into energy-giving glucose.

So why are carbs the bad guys?

Even though carbohydrates are a vital component of our overall health, there are certain carbs that serve no nutritional purpose whatsoever, and can even cause us harm if consumed too regularly and in large proportions. They are also the main contributors to the escalating obesity problem. So who are these enemies of our health and weight? They are known as refined carbohydrates.

The problems started the minute we began to process our food and strip out the fibre and nutrients from flour and sugar, to make them look appealingly white. In so doing, we made them nutritionally redundant. Food processing removes magnesium, zinc and chromium from flour and sugar – the three minerals that the body needs to metabolize carbohydrates properly. It also drastically reduces vitamins B1, B2, B3, calcium and iron.

Junk foods made up of refined flour and sugar, plus nutritionally empty processed fats, colourings, flavourings and preservatives, make up 75 per cent of many people’s diets. These so-called ‘convenience foods’ are ’empty’ calories, which hurtle into the bloodstream, play havoc with insulin and blood- sugar levels and actually deplete the body of essential vitamins and minerals that are needed to perform other important bodily functions. Processed foods have also been stripped of their fibre content, which is essential for controlling insulin production and protecting the body against diseases such as diverticulitis and colon cancer.

speed camera major malfunction? Or lazy police not reviewing photos? New Orleans police failed to review tickets generated by the automated cameras, and one guy has 10 tickets over 7 years for his parked truck

Actually, make that 11. After the first story ran last week, Schultz received another ticket on Saturday night. A security camera shows this one was actually triggered by a New Orleans Police Department vehicle speeding down the road, but as usual, Schultz was the unlucky recipient of the fine.

http://www.thedrive.com/news/20011/new-orleans-speed-camera-keeps-issuing-speeding-tickets-to-parked-cars

End result? More proof cops don’t give a shit about their jobs, and neither does the mayor or city of New Orleans. 2 cops certified that the two tickets initiated by speeding police vehicles (as seen in the video) went to Shultz. That’s just bull shit. Cops are speeding in a residential neighborhood, and other cops that are supposed to look at the damn photos, are not, they are rubber stamping them all. 

“Can You Guess Where The Screenshot Below Is From?”, The Game Tips And More Blog’s Game Screenshot Identification Contest, Re-Happens Again Today! [Updated 2018-03-02 with Answer Image]

It’s the 15th of the month – and it is time for something that I re-re-started up, just last Month – The Next Installment of The Game Tips And More Blog’s ‘New-ish-sorta-but-not-really’ Contest:

“Can You Guess Where The Screenshot Below Is From?”

(A Game Screenshot Identification Contest)

Having its’ Fifth Edition now, today – February 15th, 2018!

All you have to do to win this contest, is contact me in any way you can (eg. Comment on this article
below, Twitter profile tweet, email me or Comment/PrivateMessage TheBlog’s Steam Account by the end of the month, with these two items within your message:

1. Your guess for the game the image is from.
2. Information on how to contact you back (to receive Steam game gifts, etc) if you win.
That’s it!
**[Just a quick note to be careful not to include any information you do not wish to share ‘publicly’ when posting in the Comments area below or at Steam or sending a Twitter profile Tweet, as these messages are seen by ‘everyone’]


The first correct answer submitted by a Skillful Identifier/Gamer will receive this month’s contest prize – which is: a gifted game from the Steam online store!

[Note: Although I have been collecting Games on Steam over the past few Years, during Steam Sales,
due to how Steam has changed Gifting games through Steam recently, you will have to temporarily become a Friend
of TheBlog’s Steam Account (to receive the game – after receiving your Gifted Game, you may Unfriend of course)]
Winners will also be announced in bold, large lettered-text, here on this posting and will thereby be immortalized on The Intertubes in perpetuity, proving to all other comers that you were “The Ultimate Game Screenshot Guesser Thingy Person” [aka. Gamer]!

Previous Editions of this Contest [to ‘see how it works’] can be found at TheBlog, here:

Can You Guess Where The Screenshot Below Is From – Contest #1
Can You Guess Where The Screenshot Below Is From – Contest #2
Can You Guess Where The Screenshot Below Is From – Contest #3
Can You Guess Where The Screenshot Below Is From – Contest #4

Are you ready? Here then, is the Screenshot image for this month, below:

[As you can see, the image is a portion of a full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

After a week has gone by, if there is no correct guess as to what game the Screenshot is from, I will return here and put up a ‘Hint’ image – a larger portion of the Screenshot – to assist in Game Recognition-ing-ism…

Update!

A week has gone by and there have been no correct guesses received yet… So, here is a HINT image; (an enlarged area portion of the already-slightly-larger-than-normal CONTEST Screenshot for this month’s Contest)! Ready?

Here is the HINT image (with enlarged portion revealed), below:

[Click the Image to see it at a slightly-larger Full Size – and as you can see, the image is still a portion of the full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

At the end of the Month, if noone has guessed correctly by then, I will return here and reveal the full Mystery Screenshot and the Game it was from – Good Luck, Gamers!

Update!
It has been two weeks since the Contest began and there have been no correct submissions! Aww….

To end The Mystery, here is the answer for February’s edition of
‘Can You Guess Where The Screenshot Below Is From’ (2018-02):


The Answer for this month’s Contest was: Just Cause 2!
[Captured in 2014, this Screenshot I took was back when I was playing games at 1600×900 – which is a ‘sweet spot’ I personally recommend [by my own testing] for Mid-Range GPUs (VideoCards). This was JC2 being played with a GTS 250, the ‘Black Knight Edition’ from ASUS which I paired at the time with an AMD X2 245, iirc**. Wow, I have been planning this identification game a long time – never getting around to it for a while of course – haha]
Click to see Full Size
Come back next 15th-of-the-month friends, when you can have another chance to be a Digital Screenshot Sleuth in the Sixth Edition of ‘Can You Guess Where The Screenshot Below Is From’ – and a chance to win the Prize that will be carried over to next time: a gifted game from the Steam online store!

See You In The Games!

[**Note: I am not affiliated in any way or degree with NVIDIA or AMD, and I have not and will not receive any compensation of any kind, for mentioning them here. I am merely an enthusiastic user of both companies’ products. I have utilized both and will continue to use both in the future ((on a personal note, I find I usually am ‘stairstepping’ with their GPUs, purchasing from one manufacturer, then the next ‘upgrade’ purchasing from the other, heh. I always Suggest to people who ask; to get whichever has Features you like – and only what you can afford at the time – it will be outdated in 3 years or so anyway; Enjoy what you have and be thankful because there are always people who have less!))]

(The Game Tips And More Blog Contest Game #2018-02)

Guild Wars 2: How To Ride “The Train” of Queensdale (Champion ‘Farming’ Runs As A Group) Tutorial with Map

[NOTE*** As of April 15th, 2014 the changes to the game with the April 2014 Feature Pack update have altered The Train route somewhat – these changes will be updated in this map and article as they solidify into a commonly-agreed Route…
FURTHER UPDATES AT THE BOTTOM OF THIS ARICLE]

Ah, Guild Wars 2… I’m having so much fun with you, I can barely stop to start typing helpful Tips for others to read! Why are you so awesome? Oh, that’s right, your creators and other ArenaNet buddies heard the nighttime wails of MMORPG players from other games around the globe and listened intently to our cries, wanting to soothe us softly by satisfying requests we players have made of all of those other games, didn’t you? Oh, yes you did.  The result: a game I wish I had gotten into a lot sooner… Thank you, ArenaNet.


For those new to the game (or those who haven’t done this before), in the beginning area of the Human lands of Kryta, there is a phenomenon called “The Train”. After asking a few questions in-game and watching it a while, and then joining in on it off and on, on my own, I feel I can now safely share a simplified Tutorial on ‘The Train’ and explain to others (mainly newcomers to Guild Wars 2) what it is and how to be a part of it, if you wish to be.

Loading Screen for the Queensdale region, where ‘runs’ of The Train take place
(Click to see Full Size)

What is The Train?

‘The Train’ in Queensdale is, essentially, a cooperation of players moving and killing together as a group [in an MMO game?Whoknew?lol]. The Train targets a small number of Champion-type mobs [MOBile monsters], killing these same ones in a repeating cycle, again and again. The pattern [the “Route that The Train takes”] has evolved over time and differs little, no matter what server/shard you are on. Traveling and moving in collaboration with each other gives the result of faster kills, experience and loot for all those taking part (and sometimes the groups can get quite large). In Guild Wars 2, one does not need to ‘Party’ or form an ‘official’ group of any kind, in order to benefit from conquering enemies together [even when not following The Train]. Merely join alongside and help out a bit, and you too are now part of the Clique of Killing and can reap the rewards.

Even though The Train runs in the first leveling/adventuring area of the Humans (called Kryta), you can play any Race you wish, and then run/travel to the Human lands and be a part of The Train. There are no restrictions on Race interaction (no ‘sides’; no factions, no clans, no tribes [to restrict players]) in Guild Wars 2. Any race can be created and interact with any of the other Races in Guild Wars 2. So, be whatever race you want to be, you can still head to Queensdale and get on The Train!

When ‘on The Train’ (following the group around and helping to kill the Champion monsters), you do have to be a high enough level to ‘hit’ the enemies in order to register as a ‘contributor of the group’ and benefit from the encounter (get experience, be able to loot, etc). With the Champion mobs being ‘farmed’ [by The Train] averaging Level 10 in this region (these are the only mobs that The Train goes after, remember), you may not be able to actually hit them until your character is about Level 7 or 8; so if you are playing a brand new character, do some starting Quests, World Events or your character’s Storyline for a bit first.

Killing the Boar champion while on the Train in Queensdale
(Click to see Full Size)

If you are a ‘Brand New’ Player to Guild Wars 2, I strongly suggest doing that for the most part anyway (Quests and Storylines), as doing so, you will more easily learn how to control your character, fight battles, use your skills as you learn them, and learn to navigate the territories and develop your character as a whole.
The Train is, for the most part, a repeated cycle of killing [almost absolutely nothing but] a small number of Champion ‘boss’ style monsters (as in 5-6 of them, depending on the route The Train takes on your Server/Shard, remember it differs little) – and there have already been arguments all over forums and other websites as to whether relatively New Players should take part in it at all (and if it harms the gameplay/environment of newer players). I believe that this decision is up to each individual, as some people might eschew the practice completely until Level 80 (the current maximum level as of the time of this post), while other people will love the camaraderie and easy access to loot (you always get items comparative to your current level, whatever that may be, when the Champions die).
As with any game, there will always be people that will say a certain activity is too repetitive and boring, and there will always be people that will say it is a good source of ‘loot’, and there will always be people that will advise doing something else (like playing PvP or more PvE). I like to suggest, if people ask, that each person try Taking A Ride On The Train for themselves at least a few times, then judge whether they wish to continue doing it or move on to other things, leaving the choice up to each player.

[On a personal note for a moment, merely to address this matter that many people seem to argue about and state my own personal opinion, I myself enjoy roaming the lands of GW2 randomly, helping out NPCs and doing the little events found around the world. I play usually always play solo and that affords me the ability to change it up and do whatever activity I want, stop whenever I want (or if I get too tired physically and have to stop, due to my illness) and roam around taking [way too many] screenshots of the environs, gathering resources as I leisurely explore and discover the countryside. I often forget about the Storyline for my character – there is so much to do in the world; but I try to get in on it as I remember to and develop my character along with the story that is tailored for each Race. I do take a ride on The Train, but only as a ‘something else to do for a change’, not as my ‘main leveling mechanic’ or my ‘main source for items’. I like to think this off-and-on approach allows me to enjoy The Train while not getting too bored of it too quickly, all the while being able to enjoy the game at the same time, and it is just ‘another thing that I can do’ in the huge game world of Guild Wars 2.]

Killing the Troll champion while on the Train in Queensdale
(Click to see Full Size)

How does one ‘get on’ The Train? 

First, I always suggest to others, to get the Waypoints that The Train uses first. This will allow you to quickly relocate and follow The Train, travelling to the next Champion that is to be killed. If you did not create a Human, travel to The Human Lands and simply run to the Waypoints to open them up on your map and register them so that they can then allow you to return to them/use them in the future and for Riding The Train.

Don’t worry, there are only three main waypoints used in The Train’s generally-used rotation (and it differs only slightly on some servers/shards [for instance, on Eredon Terrace, “The Bandit” is very rarely killed by The Train – which seems to be the main difference for The Route from other shards – however, since I have created my character on ET, this is the example I will use]). The waypoints used and the route generally taken are all shown in this graphic I have created of the map of Queensdale below.

The Game Tips And More Blog’s Map of Queensdale and The Train Route as of April 2014 [Old Version]
(Click to see Full Size)

The Route that The Train takes usually runs like this (repeatedly):

  • Begin the Route from the upper right [the Double Orange Arrows on the map I created, above]
  • Kill the Boar champion in the hills there, NW of the Hunting Lodge
  • Fast Travel to the Vale Waypont and head into the caves just to the west
  • Kill the Troll champion inside the caves of Altar’s Windings
  • Fast Travel to the Phinney Waypoint and head NW to a glade at the edge of the trees
  • Kill the Rotting Ancient Oakheart champion at the forest’s edge
  • Fast Travel to the Krytan Waypoint and head NE, towards two large hills
  • Kill the Forest Spider champion on the larger hill, SE of the Hunting Lodge in a grove of trees
  • Run NW past the Hunting Lodge and up into the hills and wait for the Boar event again
A couple notes about the map: I made ‘tick marks’ (they look like little orange hyphens/dashes) that remind you of the order the champions are killed in and which Waypoint to take [-, –, —, etc]. I managed to capture and keep the ‘white dotted-line of travel’, running around following The Train, so if you are a bit lost, try to re-create the white dotted path that you see on my map. To help with finding the Forest Spider champion on a hill SE of the Hunting Lodge (and NE from the Krytan Waypoint), I put a small orange “S” where it is normally encountered. Lastly, my server/shard does not kill The Bandit Lieutenant champion [and we may be the only shard that doesn’t apparently], but if you wish to find him, he is in the Bandithaunt Caverns, N of the Vale Waypont.

The champion Boar shows up only after someone talks to Lodgemaster Carthage at the Hunting Lodge. There is a short event waiting period, then two hunters come out and slowly stalk their prey. Everyone usually waits in the hills to the NW of the Lodge and this can be a good time to go through your inventory, unpacking any goodies, salvaging, organizing, etc. There may even be some Banners nearby that can give beneficial Boons [“Buffs”], usually placed by some friendly Guild Member. Take a short break, get a drink – and get ready to jump back on The Train!

When you sit down and start to play a new gaming session, or if you have lost track of where to go next, you can always ask in Chat (/map) where The Train is at that moment, to know where to ‘get on’ (to join in). Most people simply type, “Train?” or ask “Where is the train now?”, and usually some kind soul will answer and state what stop The Train is at (what champion they are killing), or where they are heading to, at that moment. Common answers are, “Boar” or “Spider is up” or “waiting on Troll” or “at Oak”, for the various champions (it may differ slightly on your server, but not by much). Sometimes, a helpful person will suggest, “Head to __some champion__”, which means that the one they are currently fighting is almost dead, so you ‘might as well head to the next one’.

Killing the Oak champion while on the Train in Queensdale
(Click to see Full Size)

A few things to keep in mind as you ride The Train are: you have to be able to hit the mob in order to be able to loot it at all, therefore you may have trouble if you are much lower than level 7 or so (the mobs are Level 10). Loot will drop that is around your character’s level, no matter what it is, so you can usually use it right away or soon. The Boar portion of the Route takes a little bit to get started and sometimes people will say phrases like, “Boar is Walking” or “Hunters are Walking” or “Boar Starting” and so on, to let everyone know, who were most likely just standing around waiting or AFK, that the event is beginning. You can gather Resources that are around (mine veins, gather plants/food, cut down trees) or that you pass by, on your way to the champions, just don’t fall too far behind if the group is large – they can start to kill these Champions pretty darn fast – and you might miss out on the Loot Drop entirely!

Killing the Spider champion while on the Train in Queensdale
(Click to see Full Size)
That’s it! Try not to bore yourself with repeating this excessively, by the way. Have fun, enjoy the loot and camaraderie of fellow GW2 players; but if it starts to become boring, go back to your character’s story, pop in for some PvP or even do some Gathering, enjoying the landscape and beauty that is Guild Wars 2.

[UPDATE 1*** As of April 23rd, 2014 there seems to still be a lot of confusion as to the accepted/overall Route that The Train should take. There have been many arguments over what order the train will travel in and opposing groups will perform the run in awkward manner to each other. As a result, ‘finalized’ changes to this map and article will be delayed, until the community can solidify a pattern/route for The Train.
For now, “the basics” of what the Train is and does are secure and remain the same as this article. The Train may still run on your server/shard in the same manner, in general. Enjoy these aspects of this post, for now]
[UPDATE 2*** As of May 3rd, 2014 although there is still a bit of debating as to what should be a ‘standard route’ for The Train to take, a general consensus seems to be forming and this map and article will be redone and/or updated Soon™]
[UPDATE 3*** As of June 2014, although there is still some debate that occurs (mainly because someone gets to Oak ‘early’ and kills it on the group), most of the consensus appears to be this route: 
Boar-Troll-Bandit-Oak
I am working on a new, updated version of the map and will insert it here when finished.
For now, the rest of the information of this post (how to follow the train, etc.) is still valid and hopefully found helpful, for those who are interested in knowing what The Train Of Queensdale is and how to do it]

See You In The Game!

EUROPEAN STYLED DESIGN IDEAS BATHROOM

EUROPEAN STYLED DESIGN IDEAS BATHROOM

If you are looking for the best images of the sample of European-style bathroom designs, and applications of a modern sauna and gym. Here are sample images of European inspired bathroom design ideas for the home. European influence in a bathroom attached to the right furniture, cabinets bath faucets, vanities, and tile e. As well as their luxurious and spacious sauna Finish Head (European company based in Germany) in a corner, the rest of the spacious bathroom, as the essay should be dedicated to wellness and keep beautiful. Room with a bright red Finnish sauna focuses on physical fitness, also welcomed the formation of large area white cushions and fitness equipment attached to the wall. It makes sense that this is quite large, walk-in glass shower. If you have more time, is set beside a white bath has a sauna, in front of two large floor to ceiling windows.

The second room is here in a Finnish sauna takes gentler approach – offering a job to escape from their mental well-being of the outside world. solarium luxury, you can pull out in front of a soothing fire. Wide bubble bath, shower and steam bath in a wooden soaking dip to give you a variety of bathing options. You can easily live in the house of a modern European hits with a private bathroom attached.

EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM

HOW TO DECOR A SMALL BATHROOMS

SMALL BATHROOMS DESIGN IDEAS

SMALL BATHROOMS DESIGN

Small bathrooms are a great challenge to use and decorate. Some bathrooms have the ability to feel bigger, while others may require small renovation projects to improve the square footage. Depending on your particular bathroom, the choices can be easy. Decide what your budget, then follow these design ideas for great little bathroom.

Vanity area: Your sink and how much space can be avoided, is crucial in the use of your bathroom. Determine your specific needs of their sink. If you are someone who has lots of toiletries, accessories and much need storage? Use a small vanity that has cabinet doors under the counter, and add shelves and drawers inside the cabinet organization. Do not have a lot of storage needs, but want it to look decorative? Consider using a pedestal sink, sink or under a decorative wall shelves. If you do not have room for one or the other, are also wells that fit the corner of two walls. This well has a record of 90 degrees and the heat sink is tucked away between the walls to give maximum space.

TOILET: Most people enjoy a lot of space around the toilet, although this is not always a realistic option for small bathrooms today. If you can get out of the toilet, come from a smaller size, occupying less space, and give more space around them. If you can not change the toilet, to minimize the elements of the floor, such as ladders, garbage cans, and a laundry hamper in the bathroom. The more space you can see and use, the better it feels.

Bath / shower: In most small bathrooms or you have a bathtub with shower inside, or you only have a shower. If your budget allows, losing the shower curtain and add a glass door cabinet. Glass will create the illusion of a large bathroom, and when you use the shower, it feels too. Consider using shower curtains or light a lighter color if you install a glass door is not an option. If you have high ceilings, installing shower curtain with a height over the head to extend the feeling of space.

LIGHT: Dark colors make the room feel smaller and lighter color makes the room feel larger. If you have the luxury of natural light to pour a bath, it feels much larger. Mimic natural feeling of neutral tones and sunny feel warm and inviting. Replace light bulbs and those which emit a warmer light. Incandescent lamps have an important role in how you see yourself in the mirror. I hate you to the bathroom, if you hate how you look in the mirror!

Even if your bathroom is small, you can still love his potential. Use these design ideas and love your new bathroom.

SMALL BATHROOMS DESIGN IDEAS

SMALL BATHROOMS DESIGN

SMALL BATHROOMS DESIGN IDEAS

SMALL BATHROOMS DESIGN IDEAS

Raptr – Closing Down This September 30th, The Blog Here Says ‘Goodbye Old Friend’ To The Once-Useful Program


Just a notification that the ‘Graphic-Configurator, Game-Installer, Gameplay-Recorder and
Social Media client that tried to tie it all together’ – Raptr – will be no more, as of September 30th, 2017

A few days ago, I received an email stating that Raptr was ending the program/client which at one time was tied-in with AMD’s Graphic Drivers as “AMD Gaming Evolved”. Now that both NVIDIA and AMD have their own ‘game configuration utilities’ and ‘game recording capabilities’ (via Crimson for AMD and GeForce Experience for NVIDIA), “there is no need for such a separate utility”, as Raptr’s ‘Farewell Letter’ basically states:

“We are sad to announce that we will be closing Raptr on September 30th, 2017. We want to start by thanking you for your support over the past 10 years.

The world is different today than when we first launched Raptr. Many companies offer game optimization tools. Having an independent platform to do this is no longer necessary.

On September 30, we will start the process of shutting off access to your Raptr account and disabling features. If you’d like to export your tracked game play history, you can do so immediately using the instructions below:

  • Go to Raptr.com
  • Sign in to your Raptr account
  • Click to get your gameplay data

If you have any other questions, please send us feedback.

We are proud of the service we built and the community who helped grow Raptr.  Thank you, once again, for your support.

Dennis “Thresh” Fong
Co-founder and CEO”


Mr. Fong Qin, known worldwide as “‘Thresh’ Fong” for his 1990’s Quake and Doom tournament career, was also the co-founder of Xfire (which itself was acquired by Viacom in 2006). While the Raptr/Gaming Evolved client was useful, it seemed to have challenges from close to the start [or at least, noticeable in hindsight, from when I first started using it].

The Press Release – the notification that Raptr was closing down – as it looked on the Raptr website, September 2017
(Click to see Full Size)

At one time, Raptr offered Rewards for playing (and letting it track your Hours or Record your Gameplay); ‘Reward Points’ that you could collect, every time you Optimized a Game (let the utility auto-configure your in-game options/settings for you), or viewed/contributed to a game Forum (similar to Steam’s Game Forums [forii?]). You could also earn Raptr Reward Points just by playing a game and having it running (it gave a running total of your Hours Played).

The Raptr/Gaming Evolved Client, as it looked in 2014, showing the Reward Points collected at one time
(from the Gaming Evolved/Raptr Press Kit, Click to see Full Size)

Prizes to spend your Points on were Draws for, or outright purchases of, Full Games and game tie-in material, such as Character Costumes or Vehicles (Mounts). Just before it was taken away, I even saw some Computer Hardware in there (some dated GPUs mind you, but still, it was neat to see some computer parts you could earn ‘with time played’ only). I never did win a Draw for a Retail Game, but I heard from a couple of people who did. There were many, many upset users, who had been saving for years (literally), at the loss of the points system. Some noted at the time that perhaps it was an early bell, tolling for the end of Raptr, even then…

The Raptr/Gaming Evolved Client, as it looked in 2015, showing Plays.Tv in its ‘built-in’ Beta phase and Graphic Drivers being kept up-to-date [I owned an AMD/ATi GPU at the time], the client still showing Reward Points being tabulated, and the Twitch Broadcast implementation
(Click to see Full Size)

There was a Forum interface built-in to the Raptr client (directly-accessible within it) that was similar to Steam’s Game Forums [too similar?], where people could discuss games, talk about upcoming releases, and share Screenshots; but there wasn’t too much going on in them [that I could see, personally]. There were some helpful and contributive posts, but they were always few in number:

Example of Raptr/Gaming Evolved Game Forums, showing Guild Wars 2, circa 2016
(Click to see Full Size)

As ‘the end’ neared, the Forums became overrun slowly by Spammers and non-English posts talking about other websites (not that there’s anything wrong with speaking other languages, I know a bit of a handful of languages myself, but it was an English forum and much of these posts were clearly Spam of one sort or another). People started asking why things weren’t getting ‘cleaned up’, near the end.

The Raptr/Gaming Evolved Official Raptr Forum, shown in the client, displaying the number of users of the forum
(Click to see Full Size)

While many felt it was ‘just like Steam’ or ‘not needed’ even back then, it still boasted over 100 Million registered users at one point (as evidenced by the number of users within the main Raptr discussion group, above) – and it was even ‘targeted by hackers’ in 2015 – infiltrated in an attempt to gain access to the many users’ data and potentially personal information. A notice went out in January of that year, notifying users to change their password, as a result of the recent security breach:

Raptr Forum Notification, urging users to change their Passwords, after a recent security breach, circa January 2015
(Click to see Full Size)

Personally, I feel sorry that I couldn’t spend more time with Raptr/GamingEvolved, as I only discovered it a couple of years ago.. Over the entire time, my own illness prevented me from posting more, sharing Screenshots more, and talking more about Releases and Reviews [as it does here in this blog!]. I feel like it could have been ‘the next Steam with bonus game configuration’ perhaps – but alas, it simply had too many challenges going against it… People started asking for Chat interface (a la Skype) and Voice Chat, but the Voice part never came. People wanted a GVR (Game Video Recorder) and while that arrived, in the form of Plays.tv – first in the app itself and as a stand-alone utility – perhaps it was too late to save Raptr, as both NVIDIA then AMD, came out with their own ‘built-in’ gameplay recording capabilities about the same time. For example, in 2013, NVIDIA’s Shadowplay became part of their Settings Optimization client, GeForce Experience, which allowed high-performance gameplay recording. Eventually, AMD’s ReLive, part of their Crimson GPU Driver update, also allowed high-quality gameplay recording as well. Both of these essentially negated the game recording aspect of Raptr (Plays.tv, which continues onward today as its’ own stand-alone recorder):

Information Panel about Plays.TV, the gameplay recording utility that was once included with Raptr/Gaming Evolved
(Click to see Full Size)

Although many didn’t use Raptr, or even like it, there were those that used the client to at least keep track of their Hours Played, used it a light social-media app, or just enjoyed the semi-automated Graphic Configuration within. As a former user – that wished he used it more – I myself say a sad ‘Goodbye’ to Raptr. So long, old friend, I wish I got to know you better…

Health Benefits of Guava for Health and Beauty

Health Benefits of Guava for Health and Beauty

Health Benefits of Guava for Health and BeautyGuava has a Latin name Psidium guajava is also often described as guava and guava. The origin of the fruit is reportedly from a country where the sport of football was born, namely Brazil, and managed to get in Indonesia through trade channels in Thailand.
Guava and Guava has a sweet taste, and not infrequently there is still sour. Round shape leaves with green skin and flesh have two color variants of white and red are where there is little seed seeds can also be consumed.
Health Benefits of Guava for Health and Beauty - 1
The Nutritional Content of Guava
There are dozens of nutrients stored in guavas and in each of these nutrients plays an important role in terms of health shore up the human body and diligent person to consume.
Here are some nutrients that are embedded in Guava :
• The Water Content Is Not Small
• Contains Fiber
• Calories
• Containing Protein
• Fats
• Contain Carbohydrates
• Contain Iron
• Abu
• Containing Calcium
• Containing Phosphorus
• Contains Vitamin A (Carotene)
• Contains Vitamin C (Ascorbic Acis)
• Contains Thiamin (Vitamin B1)
• Contains Vitamin B2 (Riboflavin)
• Contains Niacin (Vitamin B3)
With the presence of a number of nutrients above the guava fruit can be said as the fruit is also rich in nutrients. Because of them that many people who want to cultivate the fruit is sweet, while it was for her own use is not only edible but also processed into drugs.
Benefits of Guava
Many diseases are able to be deflected slowly by this fruit, some of which are as follows.
1. Can Fight Cancer
Get used to a healthy lifestyle on a daily basis in order to avoid serious diseases such as cancer that have reported more patients to death. You can prevent cancer in a way that is diligent guava consumption. There is an antioxidant that is able to do this. Lycopene in guava is known it is easier to be absorbed in the body than the tomatoes because the difference in cell structure.
2. as Diarrhea Drug
Diarrhea should be quick to take medication. The medicine is not to be made in the factory, you can use a method that is more secure and healthy as a drink with guava juice three times a day. Guava plant also has antibacterial properties, these properties that you can use to stop diarrhea and dysentery. The antibacterial properties either be created because of the content of karetinoid, vitamin C and potassium in it.
3. Can Lower Blood Pressure
For People with hypertension are often recommended by doctors to familiarize the consumption of foods and beverages derived from guava and mangosteen peel. Why? because the fruit contains potassium, which is said by the results of the study were able to treat hypertension and lowers LDL cholesterol excess.
4. Cough and Flu
Highly vulnerable to extreme weather conditions to make your baby have a cold with a cough. The mother must take action, by giving red guava juice that also contained vitamin C and iron which can inhibit the influenza virus infection.
Health Benefits of Guava for Health and Beauty - 2
5. Can Overcome Constipation
Constipation or constipation is the most frequently encountered problems. If you suffer from the same thing you do not immediately take medicine, try to eat a medium-sized guava fruit which also included a 36 percent fiber needs that doctors recommend.
6. Make More Stomach Satiety
Guava is the food you choose as a booster stomach, because the content of fiber, protein and some vitamins in it is suitable to withstand hunger. If you are running the program for the diet, the fruit seems appropriate to provide chances of success of your endeavors.
7. as Drug Thrush
Thrush occurs because a deficiency of vitamin C as well as drinking water. You can meet the daily requirement of vitamin C by eating guava, besides that because the vitamin content can be overcome thrush was moved at this fruit.
8. Diabetes Mellitus
Drink a concoction of guava which has been boiled and filtered water is believed to be able to treat the disease diabetes mellitus.
9. Younger
Antioxidants are cooperating also with vitamin A, C and potassium in guava able to treat your skin to keep it tight so avoid premature aging.

It is remarkable not properties of guava fruit that previously may not know fully. From now make guava as a table fruit that is ready to wash the mouth after every meal. Hopefully article Health Benefits of Guava for Health and Beauty we share today can be beneficial for you. Thank You.

Globesity continue…

WHY WERE PALAEOLITHIC PEOPLE SO HEALTHY?

  • They had an active lifestyle
  • Their protein intake was far higher in polyunsaturated fats, because their animals were smaller and wild
  • Their consumption of fibre was far higher than ours, at around 100g (31/2oz) per day
  • The plants and berries they were eating were providing them with around 300 times more immune- boosting and antioxidant phytonutrients (plant nutrients) and vitamin C than the average diet offers today.

Warning signs from the present day

Diet Start

  • 300,000 American deaths per year are due to obesity-related non- communicable diseases. This accounts for 12 per cent of the entire US healthcare expenditure, costing the country $100 billion (270 billion) per year. The cost of a cheeseburger may be coming down, but its cost to the nation’s health most certainly is not.

In 2002 the Centre for Disease Control and Prevention (CDC) in Atlanta estimated that 17 million Americans, including 151,000 under the age of 20, now have diabetes. Type 2 (or adult-onset) diabetes is a disorder resulting from the body’s inability to make enough insulin (a hormone that regulates glucose metabolism in the body) – and it can be life-threatening. The risks of heart disease and stroke increase two- to fourfold and the death rate doubles in diabetics. The disease is also the leading cause of blindness, kidney failure and amputations.

  • In 2002 the National Audit Office in the UK revealed the following facts:

58 per cent of adults in the UK are technically overweight, and 20 per cent are clinically obese.

In 1998 around 30,000 people in England alone died prematurely as a direct consequence of being overweight.

In the same year obesity was responsible for 1.8 million lost working days, costing the National Health Service and the economy of the country an estimated 22.5 billion ($3.6 billion).

The number of people who are obese in England has tripled over the last 20 years, and if this trend continues, one in four people will be obese by the year 2010.

  • North American Inuits, whose native diet traditionally consists of whale meat, berries and moss, had no history of heart disease, diabetes or dental decay – until they introduced white flour and sugar into their diets.

Innovative Office Furniture Sets Were Designed by Vitra

These new and innovative office furniture sets were designed by Vitra and are basically practical approaches to the concept of “Citizen Office”.

Innovative Office Furniture SetsInnovative Office Furniture Sets

Innovative Office Furniture SetsInnovative Office Furniture Sets

Innovative Office Furniture SetsInnovative Office Furniture Sets

Innovative Office Furniture SetsInnovative Office Furniture Sets

This term was invented by the company in 1991 and taken to another level with the furniture collections below. Jo Kaiser (manager for the North American branch) gave a statement which summarizes the idea of the project: “we believe you should use an office like you would a city”. In other terms- more comfort while making the most of the available space. Here is further information from the company: “A Citizen Office encourages the occupants to work using a range of postures and to move within the office as much as possible. Working while standing or assuming various casual postures provides variety and relaxation while maintaining employee health. The Citizen’s Office takes us a step further than traditional ergonomics – physical activity is integrated with office etiquette in a natural manner. “

Quick Tip: Fallout 4 – TAB Key Stopped Working And Not Bringing Up The Pip-Boy? Here’s A Possible Fix [Text-Only]

I have been having a ton of fun playing Fallout 4 lately [again, building up my Settlements too much and ignoring the Main Storyline!] and ran into a ‘small-but-game-stopping‘ issue where the TAB key appeared to stop working. “Hitting TAB wasn’t bringing up the Pip-Boy anymore..??”

After doing some Troubleshooting and paying attention to what I was doing and pressing… it turned out to be a very simple issue – the TAB key was ‘locked’ out because of how I had used it in the Console.. Let me explain briefly:

I was playing around with SweetFX in ReShade off and on again, mainly to take Screenshots as I had lost a ton during a recent Hard Drive failure [as in thousands.. I know… but I don’t usually back up screenshots or recordings].
To open the Settings/Configuration for ReShade, the hotkey combination is SHIFT+F2.

Unfortunately, something in this combination of Fallout/ReShade/Windows ‘locks out’ the Shift Key after doing this with the Console open in FO4, and when hitting Tilde again to close the Console, this leaves TAB ‘disabled’ and it no longer brings up the Pip-Boy.

[This can also happen with the ENB series of utilities, which use SHIFT+ENTER to open and close the interface]

The Fix for this was simple, once I figured it out: hit Tilde again to open up the Command Console, then hit SHIFT once, then hit Tilde again to close the Command Console. That’s all there is to it!

Now the TAB key worked and I could bring up the all-important-and-totally-cool Pip-Boy once again! This is just a Quick Tip in Text-Mode only then; but I wanted to get it typed up and posted so that it could start to help out others that have run into this little problem [that seems to occur especially if running ReShade or ENB, in Fallout 4]. HTH

Quick Tip: Medieval II Total War – ‘Fatal Graphics Error’ [Possible Fix]

I first bought this great game as a DVD Retail Box and then later on purchased it through Direct2Drive [when Direct2Drive was around, then that service became GameFly (2015 Edit: and now it’s D2D again)]. I also have it on Steam as a backup digital download source – it’s too hard to resist those really cheap Steam Sales! Recently, I was Re-Installing M2TW, to begin conquering the world once again… However, I was surprised to see nothing but an error message (on Windows7):

The “Fatal Graphics Error” message, when starting MTW2

I personally found this error humorous, as it complained about Graphic Settings – and I couldn’t even start/get into the game to change or even set them in the first place! So, I started Troubleshooting….

Apparently, a lot of people, on many forums, have been getting and asking about this error – and still are – so here is a great chance to share this Quick Tip on a simple ‘fix’ for it I eventually found, simply by playing with the Shortcut Properties:

Right-Clicking on the Shortcut for the game and editing the Compatibility Tab to match these settings,
is how I fixed the Fatal Graphics Error problem when I played M2TW recently. Try it out!
Click image to see Full Size

After making these changes to the Shortcut that runs the game (adding two quick checkmarks in the checkboxes shown above), after launching it should show a black screen [detecting settings?] momentarily and then load up the game properly (you may have to click on the icon in the Taskbar [Windows] to bring it up a second time) but that’s it!
Hopefully that works for you all, as it did for me.

See You In The Games!

Teacher Toolbox Trio Linky Celebration!

Since the advent of Teachers Pay Teachers, my teaching toolbox has changed quite a bit. There are so many things that I’ve made or bought for my classroom, and there are many others that are on my wishlist. To recognize that, I’m hosting a Teacher Toolbox Trio linky party.

Here are the rules of the trio:
1. Share a product that you’ve made that you couldn’t live without.
2. Share a product that you’ve purchased that you love.
3. Share something from your wish list that you’re hoping to get for next year.

If you’re not a seller on TpT, no worries — just share two products you’ve purchased that you love!

1. Something I’ve Made

The Classroom Economy Megapack was my first major project for TpT, and without question, it was the one that I used all the time last year. It has everything I needed for setting up my classroom jobs, monitoring daily behaviors on a clip chart, running my classroom economy, and giving students free/very low-cost rewards. Unlike my units that were used here and there, this was on display in my classroom all 180 days, and my kids loved it. This is the one thing that I could not live without.

2. Something I Purchased

Erin’s “A Roller Coaster Day” sub plans were amazing! I had to go to an all day district committee meeting on a Friday in May when the kids were already getting a little crazy, but they LOVED this. The sub said it kept them engaged all day, and given that I was already at the stage of the year when all of our required curriculum had been taught, it was perfect. It will be a permanent addition to my sub folder, and she’s also made one for grades 5-6. You can follow Erin’s blog: I’m Lovin Lit. 

3. Something on My Wish List

I’m really planning to focus on math facts and mental math skills early in the school year, and Laura Candler’s Mastering Math Facts has been on my radar screen for a while. I’m hoping to snag a copy before I go back in July. (Yes, July!)  Laura’s blog is Corkboard Connections.

The Linky Celebration

This is more than just a party — it’s a celebration! I’ve been meaning to do something to celebrate hitting 100 followers for a while now, and as I near the 150 mark, it’s definitely time! If you link up through the tool below, you’ll be eligible to win a $25 gift certificate from Teachers Pay Teachers — enough to possibly clear off some items from your own wish list!

clip art from KPM Doodles
I’ll be using a random number generator to select the winner from those who link up. The linky celebration will end next Friday, June 14 at 11:59pm EDT and the winner will be announced on my blog on Saturday.
Can’t wait to discover some new products and see some of your favorites! Be sure to link up below, and please include the Teacher Toolbox Trio icon and/or another link to Eberopolis in your post.

Happy linking!
document.write(”);

Integrating Peer Feedback

Sometimes my students surprise me.

We’re studying the Measurement and Data standards right now in math, and we were struggling a bit with 4.MD.2 – the measurement word problems standard. We’ve been using some of the free math units from Engage NY (a resource I highly recommend), and we were on day 3 of working through word problems, and I knew I had to mix it up a bit. Here’s what we did.

First, students worked through 6 word problems from module 2. The word problems were multi-step and used many different types of metric measurement. They completed these problems independently, but they could consult other students if they got stuck. Once everyone at the table finished, they checked their work with each other to make sure they agreed on the same answer.

Next, I assigned each table a different focus problem from the 6 that they solved. They had about 10-15 minutes to work together to design a poster that explained the problem and solution. They could represent their work any way they wanted, but the work had to speak for itself — they wouldn’t be there to explain the poster to anyone else.

Once the posters were completed, I gathered the students together on the carpet, and we reviewed the Standards for Mathematical Practice using these posters I’ve made:

We talked about using these standards as opportunities to give feedback. We also discussed how effective feedback needs to be specific and constructive. If you like something, say what, specifically, you liked and how it helped communicate an idea. If something needed to be improved, explain what and how that could be done.

Once I felt like the students had some ideas for ways to give good feedback, I had the students do a gallery walk around the classroom to look at the other posters. In a gallery walk, students use sticky notes to comment on other people’s work. They can leave positive and/or constructive feedback. I let the students comment anonymously if they wanted, and they were able to reference the SMP posters if they needed ideas (I gave them access to a digital copy on their iPads). I used a timer, and they spent 5 minutes studying and commenting on each poster before rotating.

Once they’d rotated through all of the posters, the returned to the poster their group had made, and they took a few minutes to read the feedback. I had them work together to sort the feedback into the categories “helpful” and “not helpful.”

We shared a few examples of helpful comments with the whole class:

  • “I like how the team drew pictures to represent the problem, but I think the team could have explained what each picture represented from the problem.”
  • “The pictures aren’t in proportion to one another. The drawing of 1,500 mL is much larger than 3 L, but really the 3 L should be larger.”
  • “Something I really like about your poster is that it has pictures to represent the problems. One thing that you could have done differently is represent the subtraction and addition with a tape diagram.”
  • “You could have represented the answer in mixed units to make your answer clearer.”

We then talked about unhelpful comments — one word comments or feedback that focused more on style than substance.

Overall, this lesson was very helpful in getting the students to think about the Standards for Mathematical Practice and how to give effective feedback. Each group had ideas for things they wanted to change on their posters based on peer comments, and some groups even asked to work on it more during recess! It was also a good reminder for me that students can give each other powerful feedback, and I need to provide them with more opportunities to do this across the subject areas.

If you’d like to get a copy of my student-friendly Standards for Mathematical Practice posters, they’re available in my TpT store by clicking the image below.

What are some ways you incorporate peer feedback in your classroom? I’d love to hear more ideas in the comments section!

Authors Are People, Too!

Oh, bloggy friends, I have missed you! This year is kicking my behind! I had high hopes that I’d still be blogging with great regularity this year, but alas…between my 28 awesome fourth graders, the start of my PhD, and my incredible two-year-old daughter, time is an oh-so-precious commodity. By the time my little one makes it to bed at night, I. am. wiped. out. And then I usually have textbooks to read and papers to write. But not today.

Today, I wanted to share with you the very awesome author visit we had at my school.

Granted, it’s old news by now. It happened during the Decatur Book Festival on Labor Day weekend, which, by the way, is one of the coolest things you can do in the Atlanta area if you’re ever here for Labor Day. But my experience was cool enough that I still wanted to share…four weeks later…

Every year as part of the book festival, 1 or 2 children’s authors come and talk at our school. This year, the fourth graders got to listen to Chris Grabenstein. If you’re not familiar with him, you should seriously run, not walk, but run to get his new book, Escape from Mr. Lemoncello’s Library.

This book is the story of Kyle Keeley, an avid game-player who wins a contest to spend the night in the new library built by master game-maker Luigi Lemoncello. As Kyle explores the library, however, he realizes that winning the contest was just the beginning, and a whole new game with high stakes, twists, and turns is starting. It reminds me a little of Willy Wonka and the Chocolate Factory, and Roald Dahl is just one of many authors referenced in the book. It’s very clever, fast-paced, and entertaining. I started it as a read-aloud when we found out that Mr. Grabenstein was coming, and we seriously couldn’t put it down. It was one of those books where I’ve had multiple students go out and buy it on their own because they couldn’t handle waiting for us to read it in class. It’s way up there on my recommendation list.

Mr. Grabenstein definitely inspired the students as writers. He shared a lot about his writing process, but his overall message was to just let it flow without editing yourself. To illustrate that, he modeled writing a story for the students. Prior to starting, he gathered 5-6 random words that students had written on sticky notes. He stuck those in his back pocket. Then, he projected a crazy picture.

He explained the difference between a protagonist and an antagonist, and he encouraged students to “Ask yourself, ‘what if…?'” He said that there are always a few questions you need to think about when planning a story.
  • Who is this guy?
  • What does he want?
  • Where is he?
  • Who wants to stop him?
  • Why?
He then took student suggestions to answer those questions and plan his story.
Next, he had students come up with a starting sentence: “My face hurts,” and an ending sentence: “He ate radioactive iridium isotopes” so we would know when his story was starting and ending. And then he just started telling the story. It was hilarious! At various points throughout the story, he would pretend to be stuck and pull a word out of his back pocket, and no matter what it was, he just rolled with it. He has a background in improv comedy, so I suspect that helps. Still, it really hit home the message that you shouldn’t censor yourself while you’re drafting — you can always go back and change things later if you need to. When you’re drafting, you should just let it flow to wherever creative place you’re led. 
 We were pretty inspired by his presentation, and we went back to the classroom to a) write, and b) read more of his book. The kids were so excited! We were totally unprepared, however, when he came into our classroom about an hour later. (So unprepared, in fact, that some of my students were still working on their vocabulary tests on Spelling City!) 

Usually when authors have come to our school, they’ve given their presentations, signed a few books, and then split. Mr. Grabenstein went above and beyond, happy to spend his day engaging with the kids and taking an interest in what they were doing. They barraged him with questions, and he answered openly and honestly, encouraging the kids the whole time. Needless to say, Mr. Grabenstein has secured quite a fan base in Eberopolis.

In the weeks since his visit, we’ve had countless conversations in writing about some of the little tidbits Mr. Grabenstein shared with us, but more than anything, I loved that my students got a chance to see that authors are real people, too. They have good ideas and bad, writer’s block and inner editors just like the rest of us. But they power through those hurdles, and we get some fantastic books as a result.

Thank you for visiting us, Mr. Grabenstein. It was definitely a highlight in our year.

July Currently

How did it get to be July already?!?!

I’m still recovering from 3 days of EdTech awesomeness at the ISTE conference and linking up with Farley at Oh’ Boy 4th Grade for this month’s currently.

Listening – My two-year-old has recently become obsessed with Sofia the First on Disney Jr. It’s a cute show, but not my favorite of the toddler choices…not that I’ve become a connoisseur of toddler TV or anything…

Loving – I started a garden last summer, but it became somewhat overgrown when Georgia had its monsoon season last summer, and it didn’t turn out as well as I’d hoped. This year, we’re in a new house, and while I don’t have the yard space (or HOA permission) for a full garden, I have space on my deck for a container garden. I’m growing bell peppers, jalapeno peppers, herbs, tomatoes, squash, cucumbers, and carrots, and they’re really coming along! My daughter and I check on them every afternoon, so it has become a fun summer project.

Thinking – This was my first year to attend ISTE, and I learned SO much. It was overwhelming, exhausting, and inspiring, and I just need a little time to process it all. I’ll start blogging tomorrow about some of the coolest stuff I learned.

Wanting – I’m moving into a new classroom this year, so I had to box up all of my stuff at the end of the school year. I’m hoping (*fingers crossed*) that it all got moved to the new room (in a different building on our campus) so I can begin unpacking soon.

Needing – I’m a little panicked that it’s July already. I have a lot of projects that are in various stages of completion, and while I know better than to think I’ll get them all done, I’d like to check a few more items off my list before I go back to school in a few weeks.

4th Plans – I’m looking forward to a three day weekend with my husband and daughter. We don’t have any big plans, but we may take Sydney to see her first fireworks extravaganza.

On a final note, as I prepare to move into my new classroom, I’m starting to think about decorating. The wall colors are very different in my new room, so my old stuff might not work. Here’s a quick pic of the new room from my Instagram account:

I’d love to hear your color schemes/decorating ideas if you have any! The move-in and shopping spree will start next week!

Have a great weekend!

Solving the Weight Loss Puzzle Part 1

Have you tried to lose weight and failed? If so, you are not alone. 95% of the people who try to lose weight fail to reach their goal, and even less are actually able to maintain their weight loss once they achieve their goal. Obesity and the associated disease diabetes are increasing exponentially in the America despite the many published health warnings about the health risks associated with being overweight.
Why are people unable to lose weight? People are hopelessly confused about the factors controlling bodyweight regulation. This is not surprising when you understand that every single program, book, and guideline developed by various diet “experts”, including our own government, lacks crucial information, contains misinformation, or contains myths. The list of experts and programs seems endless: Dr. Atkins, Dr. Andrew Weil, The Pritikin Diet, Sugar Busters, Protein Power, Dr. Dean Ornish, the Paleo Diet, the Ketogenic Diet, and all the rest. To make matters worse much of the “information” from different experts seems to be completely contradictory.
Take this short True/False quiz to see how much you really understand about controlling your weight and bodyfat levels.
Eating a low fat diet is the key to losing weight
Eating a low carbohydrate diet is the key to losing weight
Most obese people have a slow metabolism
Obesity is a genetic disorder
Some people have a slow metabolism and some people have a fast metabolism
Exercise is not really effective for weight loss
You can eat all you want and lose weight if you do not eat carbohydrates
Low carbohydrate diets are unhealthy
If you eat foods in the right combinations you will lose weight
The key to weight loss is eating healthy not counting calories
Americans are eating more fat than ever before
Americans are eating less fat than ever before

Sound familiar? It should. All these statements have been made by various “experts”. Unfortunately, all but the last one is FALSE. If you want to control bodyweight you have to understand ALL the factors that govern bodyweight regulation and how they apply specifically to you. Stay tuned for part 2 of this article to learn more!

Long Bean Benefits For Health

LONG BEANS BENEFITS FOR HEALTH

Long Beans Benefits For Health Long Beans are vegetables that very often we encounter in everyday dishes. Whether it’s for home cooking and restaurant cooking. There are also cook it in a way sauteed, but some are making to raw vegetables.
But despite the long beans so popular for the food, I’m sure not everyone knows about the nutritional value as well as the nutrients found in these vegetables. In fact, long beans have vitamins and minerals also are quite high which is also beneficial to health.
Long Bean Benefits For Health
So, to increase your knowledge about health, here we present an overview of the nutritional content of beans as well as health benefits.
Nutrient Long Bean
Long beans contain a variety of essential nutrients for your body, including:
As a Source of Protein
With a protein content that is at least 8.3 grams per 100 grams chickpea stew, the bean vegetable vegetables long become a source of vegetable protein in our body needs protein for every day.
Vitamin B Complex
In every 100 grams of beans boiled which contains 146 mcg of folate (37% requirement), 0.2 mg of thiamin (14% requirement); 0.1 mg vitamin B6 (5% requirement); and 0.1 mg of riboflavin (4% needs); 0.4 mg of pantothenic acid (4% requirement); serta0,6 mg niacin (3% requirement). Various vitamin B complex contained in the long bean is an essential nutrient for our bodies.
In general, vitamin B complex plays an important role in energy production and nerve function in our body, so vitamin B deficiency is usually characterized by fatigue and lack of energy.
Contain High Fiber
Long beans are vegetables that are rich in fiber. In every 100 grams of beans boiled, no fiber content up to 4 grams and meet 15% of our daily fiber needs. Fibers on long beans are available in the form of pectin, which is a soluble fiber, to very good in helping keep blood sugar at normal levels, as well as for normal fat metabolism.
Mineral content of Long Bean
Long Beans are also rich in various minerals, among others :
Containing Calcium
In Every 100 grams of beans boiled which contains 42 mg of calcium (4% requirement). Calcium is an essential mineral for the formation of bones and teeth healthy and strong as well, also for nerve and muscle function optimally.
Containing Iron
In Every 100 grams of beans boiled which contains 2.6 mg of iron (15% requirement). Iron is an essential component for the formation of enzymes for a variety of chemical reactions in the body, and forming the main component of red blood cells and cells
muscle.
Contains Magnesium
In Every 100 grams of beans boiled which contains 98 mg of magnesium (25% requirement), where the mineral content is very important for healthy bones and teeth, muscle and nerve function, as well as the activity of enzymes in the body.
Long Bean Benefits For Health
Containing Manganese
In Every 100 grams of boiled string beans also contain 0.5 mg of manganese (24% requirement). Manganese is essential for enzyme activity, and also for the metabolism of carbohydrates and joint health.
Containing Phosphorus
In Every 100 grams of beans boiled which contains 181 mg of phosphorus (18% requirement), which is also important in energy production and the formation of bones and teeth.
Containing Copper
In Every 100 grams of beans boiled which contains 0.2 mg of copper (11%). Copper is important for skin health, it also increases the body’s resistance to stress and disease.
Containing Potassium
In Every 100 grams of beans boiled which contains 315 mg of potassium (9% requirement), which is important for nerve function and also our muscles.
Containing Zinc
In Every 100 grams of boiled string beans also contain 1.1 mg of zinc and zinc (7% requirement). Zinc is a component of enzymes involved in the formation of red blood cells and bone.
Containing Selenium
In Every 100 grams of boiled string beans also contain 2.8 mcg selenium (4% requirement), where selenium is an essential mineral in the synthesis of the enzyme, which also acts as an antioxidant against free radicals in our bodies.

Well, that’s what some of the vitamins and minerals contained in the beans. For you who like to consume either in the form of beans and vegetables stir fry, continue the positive trend.

My Trip to Bangladesh Cont…..

The assignment is proceeding well, the evaluation questions have been designed and the questionnaire and show cards are prepared and translated in to Bangla. I will be using an “In Depth” interviewing technique. The evaluation itself has 2 aspects to it. Firstly; to looking at the internal mechanisms which either makes them effective or not as the case may be (As an internal service provider) and; secondly, getting conformation from outside the Unit (As an external service provider) to establish if they were effective. The main internal interviews have been conducted and now I have to conduct the external interviews. The external interviews are going to be held in the districts of Dinajpur, Nilphamari and Lalmonirhat. I will have to undertake an 8 hour journey over road to get to Sayedpur where I will be based. Hope to get back to Dhaka on the 15th.

My Trip to New Delhi & Hyderabad Cont…….

Today I finished the 2nd organizational capacity assessment of research organizations. I must say that I was impressed with this organization in terms of its outputs. I was equally impressed as to how they have been able to manage the organization with limited resources.

On the way to the organization today I was able to take a photograph of the 3 wheeler which was kitted out as a tipper and used for garbage collection. Here it is.

And More: A Simple Explanation Why ‘Loot Boxes’ May Be Considered “Gambling”, In Games Like Star Wars Battlefront II, Et Al… [Editorial]

((Portions of this article
may or may not have
information obtained
from this unidentified
Imperial Officer))

Recently, in the game Star Wars: Battlefront 2 (EA, Dice), there was the introduction of “Loot Boxes”. These are purchasable ‘crates’ that can contain multiple items. These items are generated randomly (RNG, Random Number Generation) and are obtainable by using “RealLife™” Money [my superscript as pun] – and therein lies the problem being discussed.

In an attempt to explain it simply on a Steam Forum Thread a few days ago, I posted the comment below. I replicate it here, to share with others, so that this whole ‘issue’ may be understood more fully:

“If I may pop in, to explain the reason why “loot boxes could be considered gambling”; it is due to a few factors:

– There is an RNG factor in the potential items from the Loot Boxes (the items are random, and some items are worth more than others)

– The inclusion of the possibility of utilizing RealLife™ Currency to obtain them.
[Because of this element, more than anything, it could possibly be construed as “gambling”…]

– Because the items (1) can be exchanged in the game for other items that ‘cost RealLife™ Money (2), they are ‘gambling on the possibility’ that they will ‘save money’ if there are better/higher items in the Box purchased (i.e. they will ‘save money’ if the RNG produces higher/better items in the Box; they will not have to buy much more)

Together, all three points mean the game essentially has “gambling” within it…
I assume the reason why some parents are getting upset about it, is that there is a possibility of a Minor using their RealLife™ Money to obtain the Loot Boxes (in any game).

The solution is simple however; remove the possibility of utilizing RealLife™ money to obtain the Chests/Boxes/etc OR the possibility of getting ‘better items’ that will ‘deconstruct into elements that can accrue to get better items’ (“saving money” if the better items appear via RNG) and there is no longer the possibility of it being “gambling”, as it were.”


The above points, along with the fact that the ‘items’ can actually affect a players’ performance (i.e. a person with more items or better items can actually live longer or do more damage than someone without the items), is the sum of the whole problem that is upsetting many gamers, the entire issue becoming aflame in the recent release (Nov.17th) of “Star Wars: Battlefront II”.

Other games (eg. “Team Fortress 2”), handle this concern for the most part by making sure that the items contained in their ‘loot crates’ are only ‘cosmetic items’ (hats, skins, costumes, etc) that do not affect player performance against other human players. It remains to be seen whether the “RNG Factor” involved in such ‘Crates of Loot’ in these other games, like TF2, are going to still become a ‘gambling’ issue, or not.

Hopefully this helps you dear reader, in understanding the issue at hand and why some people are getting ‘up in arms’ about it at this time. 

~Troy from The Game Tips And More Blog

July Currently & Goals & a Meet Up!

Oh, July! You seemed so far away a month ago. How could you possibly be almost here already?! Can’t we add another month in between June and July? I really, REALLY want to hold on to June as long as possible. I’m really not ready to return to work in a few weeks…

Currently July

I’m linking up with Farley at Oh Boy! 4th Grade for the July Currently.

Listening: My little girl is almost 2, and she LOVES books. She also loves Pete the Cat. I took her to my favorite children’s book store, Little Shop of Stories, to get the new Pete the Cat book the day it came out. Given that she knows and loves the song “Wheels on the Bus,” it’s a great book for her to “read” on her own.

Loving: Planbook.com. I signed up for the one-month trial to tinker around with it, and it’s fantastic. I’ll definitely be using it next year.

Thinking: that I’m much more prepared to teach the Common Core this year — especially with math. I’m excited about implementing all of the things that I worked on this summer to get ready for math, and I’m optimistic about my year ahead.

Wanting: a longer summer break. There are so many things that I still want to do before going back to school, and I don’t think I’m going to be able to get them all done.

Needing: a maid. I can’t keep up with my husband, toddler, and two dogs. Once I go back to work, it may be time to hire someone to come in each week.

Tips, Tricks & Hints: One thing that helps me with time management is to try to group all of my like-projects together and work on them at once. For example, I have one day a week at school that I do all of my copying (or at least I did before going paperless!). I also spend one day working on plans for each subject (e.g., a day for math planning, a day for science, etc.) and a day for working on blog posts, etc for the week. This helps me use my time more efficiently and stay relatively organized.

July Goals

I’m also linking up with Jess at I {Heart} Recess for the first time for the monthly goals post.

Personal: I want to start exercising at least 3 times a week (baby steps). I return to work in a couple weeks (!), and I know with all that I’ll be juggling this year between work and my doctorate that I will need to do better with exercise for balance and stress management.

Family: I want to squeeze in a couple more “date days” before going back to school. My daughter is in school year round, so on “date days,” my husband leaves his office before lunch, and then we go out to lunch and catch a movie before picking her up. It saves us babysitting costs, and it’s a fun way to spend our afternoon.

Health: A few years ago when I lost a lot of weight, the biggest change I made was that I consistently drank 64 oz of water every day. Now that I’ve gained back the weight (and then some), I need to start drinking at least that much water every day.

School: I report to our staff retreat on July 17th, and then pre-planning officially starts on July 25th. I need to figure out how I’m going to decorate my room before then and map out some plans for the first few weeks before then.

Blog/TpT: I’m hoping to wrap up my Paperless Challenge series in the next few weeks, and I have several new TpT products in the works. This summer has just gone by too quickly for me to finish it all!

Outside the Box: I want to find some easy and tasty breakfast and lunch recipes that I can use throughout the year. I do a fairly good job cooking healthy dinners, but I am not consistent the rest of the day. I often forget to eat breakfast, and then I don’t make the best choices for lunch either. The more I plan ahead, the better prepared I’ll be. And this justifies spending more time on Pinterest. Win-win!

Southeastern Bloggers Meet Up!

Have you heard about the Southeastern-area blogger meet up? It’s about time that those of us in Georgia and the surrounding areas get together, and I’m super thankful that Stacia, Amanda, and Jivey from Collaboration Cuties and Ideas by Jivey have  organized something for us. If you are close to Atlanta, I hope you’ll join us for the meet up on July 20th. It promises to be lots of fun.

Click on any of the images below to connect with Jivey’s blog where you can RSVP.

I hope to meet lots of other fabulous teacher bloggers there! Click the button below to RSVP.

Food Repair Guide: Baking Part 1

Bread

Bread, being about the first thing that man made, is also about the easiest. Ordinary bread is only flour, salt, liquid and yeast, well kneaded to mix, and baked. The modern cook with a food processor need not even bother about the kneading (which is only done to spread the yeast really thoroughly through the bread) as the food processor does it all for her. Unless, of course, she enjoys doing battle with balls of dough!

Ingredients/yeast

Flours differ but, as long as the flour is of good quality and dry, the differences are a matter of personal taste. Water is the normal mixing liquid and sea salt has a better flavour than table salt.

If the yeast is fresh and alive, when put in a damp, warm atmosphere, it will rise and grow whether it is incorporated in a dough or alone. Old age kills both compressed and dried yeast, as do extremes of temperature: anything over 110°F/50°C or below standard refrigerator temperature.

Once the yeast has been creamed by mixing it with sugar and a little warm liquid, it needs only to be thoroughly amalgamated into the dough, by hand or machine.

Diet Start

Rising, etc.

After the yeast has been mixed in, the dough must be left to rise, and in some cases prove. This will happen more or less quickly depending on the ambient temperature, but the longer it takes, the better the bread will be. Elizabeth David, among others, maintains that bread that has been left for 24 hours in a moderately warm kitchen will taste far better than bread that has been ‘hurried’ in a warming oven. However, an hour should be the minimum time — unless you are using a food processor and extra vitamin C to assist the raising.

If the dough does not rise, it means that the yeast is dead — whether through old age or overheating — and there is nothing you can do about it. Dead yeast has a smell and flavour not unlike dead cats and is totally unrevivable. Throw it out and start again.

Once you have mastered the basic techniques of bread making, all fancy breads are merely an elaboration on them. Most bakery books are extremely explicit in their instructions.

Cakes

Raising agents

Most cakes use eggs or chemical raising agents rather than yeast. The lighter sponges use whisked egg white; heavier sponges or fruit cakes use whole eggs or a combination of whole eggs and baking powder or bicarbonate of soda. These work by giving off gases when heated, thereby raising the mixture. The more chemical raising agent one uses, the lighter, dryer and less keeping the cake will be. Thus, fresh light sponges or angel cakes should be eaten within 24 hours to be at their best; a rich Madeira cake will keep several weeks; a fruit cake several months.

Mixing

The early mixing processes in all cake making are important, be it beating eggs and sugar to a ribbon or creaming butter and sugar for Victoria sponges. In both cases, early and thorough beating ensures that the cake will remain moist. Beating later in the process when the flour has been added will make the cake tough, heavy and elastic. Obviously, beating a light sponge after the egg white has been folded in would defeat the purpose of the operation.

For cakes that need to hold a filling in place — such as a cherry Madeira where you are attempting to keep the cherries in suspension — do not add all the liquid until you are sure that the full amount will not make the mixture too liquid to support the fruit.

Packet mixtures

If you feel that you cannot face the traumas of total cake making, there are a great number of excellent packet cake mixes on the market and you might be well advised to give up the whole business of being a home baker and use one of them.

Cooking

Follow the instructions in the recipe (or on the packet) for baking times and temperatures but do check yourself, as your oven may not behave exactly as the instructions say it should. Do not, however, continually open and shut the oven, as you will kill whatever chance the poor thing had of rising evenly in a constant heat. Similarly, when you test it, do not be too vigorous. If a light sponge gets a fat skewer stuck in it, it will break the crust and release half the air being carefully husbanded inside. Press the sponge very gently with your finger and, if it resists, it will be done. A more robust cake will stand the skewer treatment but, even then, do not do it more than you must.

Turning out

Whether the mixture is from a packet or home-made, it is most important that you are able to get it out of the tin when it is cooked. Greasing and flouring tins should work but has been known, only too often, not to — especially if the butter was salty! Invest in one, or several, loose-bottomed cake tins, which guarantee complete success — not only for cakes but for pâtés, mousses, jellies or anything else that you fear may lurk shyly in its container and refuse to emerge in public. If the mixture is very liquid, as in a very light sponge, line the tin with greaseproof paper to prevent it leaking out the bottom.

INTERIOR DESIGN IN BANKE HOTEL

BANKE HOTEL

BANKE HOTEL ROOM DESIGNBANKE HOTEL ROOM DESIGN

BANKE HOTEL DESIGNBANKE HOTEL DESIGN

The Banke Hotel is recently installed in the Opera district in Paris-a first for the prestigious hotel chain Derby Hotels Collection. As its name hints at the Banke Hotel is the story of a metamorphosis. That of the body of a conventional bank Haussmann in a luxurious hotel of 94 rooms – which harmoniously blend the baroque style and design

WORKOUT ANYTIME in the Daily News

WORKOUT ANYTIME in the Daily News

Dale Chaffin of WORKOUT ANYTIME Bowling Green was recently featured in the Daily News. Dale was interviewed for the story and a photographer was assigned to take his photo for a story about the WORKOUT ANYTIME location in Bowling Green where he is the GM and how he has lost 80 pounds since 2012 with help of personal trainer Chris Talley. The story focused on how working at a gym has helped Dale with his fitness goals. 
View the full article here. 

My trip to Hanoi, Vietnam

I returned to Vietnam to facilitate a 2 day planning workshop for the 6 organizations that I did the capacity assessments in January. It felt good to meet everyone and catch up. The workshop went smoothly and I had very positive feedback from the participants.

I was happy to see people genuinely interested and participating / contributing towards the workshop. This ensured a high quality of the results and the buy in by the participating organizations. I put the success of the workshop down to the following:

  1. The CEO / Executive director (ultimate boss) of the organization participated
  2. They had read the organization capacity assessment report and were familiar with the contents.
  3. They were guaranteed of a tangible workable plan at the end of 2 days.
  4. Being open and willing to learn

There is a chance that I may be requested to do some more work for them in the near future; however it seems that this is the end of this phase and the client is happy with the results.


The view from the roof top restaurant near Hoan Kiem Lake.

I stayed at the Trang An hotel; It’s in the center of Hanoi, near Hoan Kiem Lake, so quite convinient for walking around, shopping, finding nice restaurant, etc… Had a good time too.

It’s Not Just You™ – Fallout 4 Crashing with NVIDIA’s SHARE Game Recorder (Possibly Relating To The High Resolution Texture Pack) [Notification, Text-Only]

Updated 2017-06-19: I found one cause of the crashes with SHARE and Fallout 4 (for me) – The HRTP

Just a quick post to say that, if you are experiencing Fallout 4 CTDs (Crashes To Desktop, where FO4 closes without any messages or anything and you are left staring at your Desktop in Windows), I want to let you know It’s Not Just You™ – as I am finding I am experiencing this as well, lately…

I haven’t looked into Forums specifically for this, but perusing Forii off and on over the past year or so, where many are talking about Fallout 4 and Crashing, it seems to happen a lot to people anyway, for just about any reason, unfortunately. I myself wasn’t experiencing this very much though (gladly), until just recently when playing FO4 again [and spending way too much time building up Settlements instead of getting Quests done], I was testing out different Game Recording Programs and started seeing this happen.

I’m happily playing Fallout 4, getting frustrated at the Building mechanics or shooting some Raiders attacking my Settlement, when all of a sudden, BOOM – desktop image and icons. No message, nothing. Fallout 4 has closed itself instantly. I of course start it up again and begin to see where I last hit QuickSave or the game automatically Saved for me – but this has happened a few times in a row now where BOOM – the desktop greets me and icons appear. No message, nothing.

So, I tried to pay attention to what I was doing or what was running as Background Tasks – and the one thing I found, that when I changed it, the crashes stopped happening?.. I was recording with SHARE, NVIDIA’s new version of ShadowPlay, their game recorder that is included with their Graphics Driver. Interesting. I have up ’till now had no issues with SHARE, enjoyed testing it out, taking Screenshots with it and testing out the various Quality settings and forgetting about all of those tests and never writing about it. It seems to have great performance (very small performance ‘hit’/effect) and has a decent amount of options/features.

I then tried some other game recording programs I have purchased over the years, Playclaw, Bandicam, Mirillis’ ACTION, and none of them had any Crashing occur while I was using them (although Fallout 4 didn’t seem to like to start up with Bandicam running sometimes [but when I started the game first then Bandicam, it recorded fine]). Hmph. That’s too bad, I was liking SHARE. There could of course be a myriad of things that could be causing this (I have sometimes run into the game not starting up, with a black screen then shutting itself down again/closing, no matter what game recorder I am using – and again, there are people with high-end Intel CPUs and NVIDIA 1080’s with CTDs…); but for me, it seems to be SHARE, at this time. I might go and mention this in the Official NVIDIA Forum, if noone else has recently. Perhaps this is just a temporary issue in this game and their Drivers, in this version.

I am running NVIDIA GPU Driver Version 382.53 in Windows 10 64-bit, on a GTX 1060 3GB GPU, as of the date of this post.

I know this was a Text-Only post, but I took this screenie of the Driver
Version (so I would remember it) and didn’t want to waste it

I mention all of this because, I was not really experiencing any Crashes-To-Desktop with Fallout 4 prior to thinking of testing out SHARE for a while, just a bit ago. I am Level 42 in the game, after ‘starting out a second time’ and enjoying playing again, taking notes and screenshots for some future posts on it, while I slowly build and shoot my way through The Commonwealth… Where was I? Oh yeah, the crashes. It’s sad, but I want others to not feel alone (you’re not, really, go look up “Fallout 4 crash desktop”..). If you are experiencing Fallout 4 closing without any error messages recently, just letting you know – It’s Not Just You™…


Update 2017-06-19:
For my personal battle with this, I did some more testing and found that I was able to use NVIDIA’s SHARE to record with, for quite a long time (hours), when I disabled/uninstalled the High Resolution Texture Pack DLC…
I am not sure if this is the only related aspect to it (as CTDs happen for even GTX 1080 users and higher capability systems than mine and it happens to those not using the HRTP or SHARE at all), but for now, it seems that this issue may be directly related to that [for me] as it crashes far more often than without running the HRTP – and I have no crashes when recording with other Game Recorders and The High Resolution Texture Pack…

Is it that the HRTP is ‘too much’ for my little 1060 with only 3GB of VRAM and SHARE together? 
Is it related to how the game then uses more RAM (I have 16GB of RAM installed) with the HRTP and possibly a symptom of some RAM issues, perhaps?
I’m not sure of a solution yet, so I cannot say – but if you are experiencing this problem of ‘Crashing while recording Fallout 4 with SHARE’, try disabling the High Resolution Texture Pack for FO4 – it worked for me, just now. (Alternatively, use a different Game Recorder for the time being..). HTH

Health Benefits of Red Pomegranate

HEALTH BENEFITS OF RED POMEGRANATE

Health Benefits of Red PomegranatePomegranate or pomegranate is a fruit with a red color that turns out to have a lot of nutrient content. Nutrients contained in the fruit is so much especially nutrition for protection of the skin. Some nutritionally beneficial is an antioxidant, anti-inflammatory, and anti-aging.
Health Benefits of Red Pomegranate - 1
Pomegranate Benefits for Beauty
In this modern era, the pomegranate has been processed into a variety of products, both health and beauty. So what are the benefits of the pomegranate to the beauty of your skin? Consider the following tips:

  • Caring for the Skin
Pomegranate turned out very rich in collagen. Collagen is the basic component of the skin that keep skin smooth and soft. Not only rich in collagen, the compounds in pomegranate also helps fibroplats cell growth. Fibroplats are cells that have the task to produce elastin and fibers that are useful to keep the skin to remain smooth and taut. Pomegranates can also stimulate the proliferation of keratinocytes. This process is a process of forming the outermost cells of the skin.

  • Helps Cell Regeneration
If you have freckles or skin rash on the face, it could be signs if your skin starts to break down. If your skin is already starting to show signs of such, better immediately consumes pomegranate. This is because the pomegranate can provide benefits to protect your skin layer and help regenerate the skin in the inner layers of your skin. The content of antioxidants in pomegranates can also help your skin ward off free radicals caused by pollution.

  • Prevent Premature Aging
You want to look to look like a young impressed? It helps you consume pomegranates. This fruit turned out to contain a compound that works to prevent premature aging. You can consume it in juice form or in the form of oil. But you are advised to use oil only because it proved more effective. You can apply pomegranate oil to your entire body after bathing. By applying it regularly, your skin will become firmer and younger looking.

  • Treating Acne
Pomegranates are rich in vitamin C. Vitamin is that it has a function to regulate oil production in the face. To treat acne using pomegranate quite easy. The first pomegranate puree until smooth. Then apply on face masks to be like. Let it dry and then rinse with cold water. By applying to your face with acne, this pomegranate will shrink acne once existing acne scars on your skin. So, want to be free of acne? Use this pomegranate fruit mask on a regular basis.
Health Benefits of Red Pomegranate - 2
  • Moisturize The Skin
Do you have dry skin? If so, you can use pomegranate to moisturize. Pomegranates have very little meat structure. Size is what can cause pomegranate can go into the deepest part of your skin. By logging into your skin, pomegranate will work to moisturize your skin. Not only moisturize the skin only, pomegranate is also able to cope with the irritation of the skin. This is because the pomegranate contains omega 5, which serves to keep your skin moist.

  • Treating Skin Irritation And Skin Burns
Pomegranate it also can be used as an ointment to treat your skin is injured. This is because the pomegranate contains compounds called polyphenols. Besides polyphenols, pomegranates also contain another substance called anti-inflammatory substances. Both of these substances which can be used to treat your skin is exposed to irritation or burns.
How to make it too easy, you can refine pomegranate and afterwards paste it on your skin is injured. Let dry and rinse with cold water slowly so as not to cause pain. Do this treatment until your wounds heal properly. In order to maximize results, you are also advised to drink fruit juice to the wound on your skin really recovered.
Pomegranates for Health Benefits
The benefits of pomegranates not only for beauty, but also for health. Pomegranate is commonly used to treat deficient blood aka anemia. In addition, the fruit is also very well taken by pregnant women.

  • Addressing and Preventing Cancer
Within this pomegranate fruit contains a substance called flavenoids. Flavenoids substance is a kind of high antioxidant substances that are useful to prevent cancer in your body. If someone contracting cancer, it is better to consume the fruit of this one because the fruit is proven to be able to fight cancer cells growing. Some types of cancer that can be treated with pomegranate juice, among others, breast cancer and prostate cancer.

  • Overcoming Anemia
Not only vitamin that is useful to you only beautify. Pomegranate also contains iron. Iron content in pomegranates fact can treat you who have anemia. For those who have anemia, you can create and drank pomegranate juice regularly. Not only serves to treat your anemia alone. Pomegranate was also able to prevent anemia early.

  • Other Benefits of Pomegranate
In addition to the above benefits, there are other benefits of pomegranate, especially for women who are pregnant. If you are pregnant, it is good to consume pomegranate. Facts indicate if the pomegranate can reduce the chances of having a baby born prematurely. In addition to consuming pomegranate baby weight will make you become more standardized. For those of you who are old, pomegranate also has properties that are very good if you consume regularly. This is due to the arrival of pomegranate can prevent Alzheimer’s disease.
There are so many benefits of pomegranate is right, Ranging from health to beauty problems can be overcome with pomegranates. Hopefully Articles Health Benefits of Red Pomegranate that we share today can be beneficial for you. Thank You.

Workout Anytime in Global Atlanta

Workout Anytime in Global Atlanta

WORKOUT ANYTIME was recently featured in Global Atlanta. The article highlights Atlanta based fitness center chain, Workout Anytime adding its first location in Canada this fall. It mentions the new location in Calgary, Alberta scheduled for an October opening. Randy Trotter was quoted about the success Workout Anytime is planning to bring Canada. It also mentions Dustin Taylor and Jeff Gellatelly are the mast franchisees for the new location and grants them rights to open Workout Anyime centers in the provinces of Alberta and Saskatchewan.

You can view the full article here. 

And More: Corel’s VideoStudio – Crashing When Using ‘Open With’ To Import Clips Into VideoStudio [Fix/Workaround]

Just last Month, I picked up version 20 of Corel’s recently-updated video editing suite “VideoStudio” (nomenclature “X10”) and am having a lot of fun learning what it can do and how to do it all (coming from mainly editing videos with Sony’s Vegas ‘Movie Studio’ line of products [now taken over by MAGIX]). However, I quickly ran into a little issue with importing clips using the “Open With” option in Windows and wanted to share what I found…

Normally, in Windows you can ‘right-click’ a video file and mouse-over the menu option “Open With..”, which brings up a sub-menu of known applications, to ‘send’ the file to (‘opening the file with the chosen application’). Doing this, whichever application you select will startup and the file will be sent to it to work with.

However, doing this with a video clip and VideoStudio x10 I found, every time the program would open up, it would immediately ‘crash’ (close/stop/etc). Hmm… time for some Troubleshooting! I double-checked that the file in question was not corrupted excessively by playing it, testing it in a couple of video/media players, and even tried a few other clips that were ‘known good’ (that VS worked with before). Each time, using “Open With…”, the Splash Screen for VSx10 would show up and then just as the program itself looked like it was opening, the entire thing would crash and show this message:

Example of the “Corel VideoStudio has stopped working” Error Window Pop-Up
when trying to import a clip into VideoStudio X10 utilizing the “Open With” shortcut in Windows

I then went to the Corel ‘Official’ Fora [Forii?] and did some searching to see if anyone ran into this same issue. Unfortunately, all I could find were people experiencing ‘general crashes’, that is, crashing and non-starts without it being specifically associated with utilizing “Open With..”.

I then decided to try these same ‘testing files’ on some other video editing programs I have installed, such as Sony’s Vegas Movie Studio (now owned by MAGIX, the same company that makes the Movie Edit Pro product line, which I have no experience with yet, at this time). Using the “Open With..” command, Movie Studio was able to open and import all of the video clips without issue – so then, what’s up Corel? /tilthead

I thought of trying VideoStudio ‘on it’s own’, not importing or ‘sending’ anything to it – just opening the program and seeing if it works… Everything opened fine! I was just playing with the program the other day in fact, learning some of the features it offers [I’ll have to write a short ‘Review’ or at least a ‘First Impressions’ sometime of it]. So why was it being ‘fussy’ (to use the highly technical term)? I tried opening and closing the program a few times thinking about it, when I noticed that when I opened VideoStudio X10, I was being greeted by a nice-and-helpful “Welcome” StartUp Page…

The “Welcome” Section of VideoStudio
(Click to see Full Size)

Indeed, ‘The “Welcome” Startup Page’ offers a lot of helpful information on opening VideoStudio. There are Tutorial videos on some of the New Features for that version and even Basic Tutorials and Help File links. But wait – no editing interface! No Timeline, no Media Library to add clips – that’s it! That’s the problem! I went into the Settings to see if there was a Preferences option where I could set the Section to open VideoStudio to be – not the “Welcome” section, but the “Edit” section – the tab/area where all of the editing/mixing and importing takes place. There it was: Default Startup Page – and it was set to “Welcome Book”…

The Corel VideoStudio X10 Preferences Window
showing the Default Startup Area/Section which is shown when the program starts
(Click to see Full Size)

A simple pull-down menu change to “Edit” and that was it! Now, VideoStudio is opening to the “Edit” section/area every time. So, I tested it out: right-clicking on my video clip and mousing-over “Open With..” and then clicking on “Corel VideoStudio” – it worked! VS opened up and in a few seconds more, my little video clip was right there on the Timeline, waiting patiently to be edited. Woohoo!

Example of Corel VideoStudio x10 Starting Up In The EDIT Section
(Click to see Full Size)

Here is a video version of the steps above, made showing the error when trying to use “Open With..”, what happens and how to change it, as well as the final ‘working’ result of changing the option (after I finally figured out what it was):


[VIDEO NOT YET COMPLETE, IT WILL APPEAR HERE ONCE FINALIZED AND UPLOADED TO YOUTUBE]

Hopefully this will help any of you dear readers, who use VideoStudio and were running into this error/crash/issue when opening clips with VS (trying to use “Open With..”).. Enjoy and Have Fun editing your gameplay clips once again!

~Troy from The Game Tips And More Blog


[I’m calling this a Workaround, since this is more of that than a true ‘Fix’… It does not solve the base issue of VS not being able to import a clip using “Open With” without taking taking these steps (whether this is more Microsoft’s fault or Corel’s fault is beyond the scope of this post …and being more experienced in computer hardware than computer software (programming, etc), I would not have completely isolated the very base cause of the issue anyway – or at least, could not offer a 100% explanation of what is occurring)]


Note: I am not affiliated in any way with Corel and I have not, and I will not, be compensated for mentioning VideoStudio or any other of the products herein, in any way.  I have used other video editing products than these in the past, and will do so in the future, including free editing applications, such as VirtualDub, AviDemux, DVDVideoSoft products and more… I am merely an enthusiastic gamer-and-sometime-editor and wanted to share information that I discover about these products to help other gamers record-and-edit and have fun doing it, if I can do so.

12 Days of Fitness with WORKOUT ANYTIME

12 Days of Fitness with WORKOUT ANYTIME

Are you in need of a little inspiration to hit the gym this holiday season? Here’s a great workout routine to give a try this holiday season provided by the experts at WORKOUT ANYTIME. Enjoy! 

Week 1

4 days of exercise

2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 
2 days of body weight or weight training for 12 min per day
Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

Squats
Push-ups 
Walking Lunges
Jumping Jacks
Burpees
Ab half roll backs (seated position, roll half way back, come up and exhale)

Week 2 

4 days of exercise

2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with their moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 

2 days of body weight or weight training for 12 min per day
Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

Pop Squats
Push-ups w/alt knee
Forward Lunges with bicep curl
Plank Jacks
Mountain Climbers
Ab full roll up (lying position, roll all the way up, and exhale)

Week 3

4 days of exercise

2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 

2 days of body weight or weight training for 12 min per day
Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

Squat swing with overhead tricep press
Spider-Man Push-ups 
Reverse Lunge with bicep curl
High Knees
Shoulder push-ups
Navy Seals (Ab exercise)

Do you have Food Cravings? Food Cravings Test

  • Do you frequently eat until your stomach is uncomfortably full?
  • When you get hungry, does it make you feel tense, weak, or irritable?
  • When you get hungry, do you sometimes focus on one or two specific foods?
  • Do you snack often, usually eating the same snacks?
  • Have you ever had other addictive habits, such as smoking or drinking too much alcohol or overconsuming caffeine?
  • Diet Start
  • Are you often hungry after a meal and stay that way until you’ve eaten one of your favourite foods?
  • Do you usually need dessert after dinner to feel satisfied?
  • Do you tend to eat a relatively narrow range of foods?
  • When you eat your favourite foods, do you often intend to eat only a moderate amount, but end up eating a larger amount?
  • Do you sometimes feel as if you lack control over what you eat?
  • If you snack on foods other than your favourite foods, do you tend to feel unsatisfied?
  • Do you binge on food more than once per week?
  • Even if you know a food doesn’t agree with you, do you eat it anyway?
  • When you eat your favourite foods, do you frequently drift into an almost trancelike state of relaxation?
  • When you eat one of your favourite foods, does it generally improve your mood?

If you answered yes to six or more questions, you are probably overweight. If you’re not, you must have a tremendous degree of willpower or an exceptional metabolism.

When this happens, you will stop eating as much as you now eat, and your metabolism will heal. You will then begin to lose adipose tissue gradually, painlessly — and permanently.

What is the Best Way to Warm-Up?

There is a lot of controversy and conflicting opinions on what you should do for a warm-up for exercise.   One of the reasons is that warm-ups should vary based on the activity you are preparing for and your level of fitness.
As the name implies one of the key goals in warm-up is to literally raise the body temperature and gradually ramp up the cardiovascular system to be prepared for harder efforts.     The length of warm-up should be based on the intensity of the activity.     Low intensity activities like moderate pace walking really require no specific warm-up as you can simply ease into the activity itself as a warm-up.     For activities like competitive athletic events that involve high intensity effort the warm-up should be longer.
In the same way, you have to consider your fitness level because a warm-up for a highly fit individual may be relatively high intensity exercise for a deconditioned person.
For all warm-ups, a 1 – 5-minute period of escalating cardiovascular exercise that raises heart rate and body temperature is advisable.    For high intensity athletic events this should be extended until the athlete breaks a sweat without being fatigued.   
This literal warm-up can be done on a cardiovascular exercise machine or via dynamic bodyweight exercises like squats, lunges, planks, push-ups, etc.    
Once you raise body temperature you can include some dynamic stretching with an emphasis on movements that address key joints and muscles involved in the actual activity you are warming up for.   For example, for tennis warming up the shoulder joint and surrounding muscles is important while for cycling this is less relevant.
 A Proven Warm-up Protocol
Warm-ups for sports participation have been researched and there is one in particular protocol that is proven to reduce injuries by improving muscle strength, balance, and coordination.    This protocol is called the FIFA 11+ Program and involves doing 15 exercises.    For a complete how to guide click here:  https://www.slideshare.net/PedMenCoach/fifa-11-warmup-to-prevent-injuries 

Although this protocol was developed for soccer it can easily be modified to fit just about any competitive sport!

The Secret Knowledge of Fourth Graders

As I was reminded in reading all of the June Currently’s, not everyone is on summer vacation yet. So for those of you who are not yet enjoying time off, I wanted to share a fun creative writing activity that works well for the end of the year.

One of my favorite books to share with students is The Secret Knowledge of Grown-Ups by David Wisniewski.

In this highly-entertaining book, Wisniewski takes several “rules” that children often hear — like “eat your vegetables” — and explains the real reason that rule exists. For example, we don’t eat our vegetables because they make us healthy. The real reason we eat them is to stop them from rising up and taking over the world! Or, we don’t brush our hair to help us look neat, we do it to stop the hair from growing back into our heads and crowding out our brains. The book is filled with hilarious examples and colorful illustrations that my students loved.

I read excerpts from this book over the course of a couple days, and several of my students looked at it in their free-time. We then set out to write our own examples for a class book entitled “The Secret Knowledge of Fourth Graders.”

Here are some of the “rules” students wrote about:

  • Why you need to read “Just Right Books”
  • Why we use number 2 pencils on tests
  • Why you can only check out 2 books from the library at a time
  • Why we take AR tests
  • Why it’s important not to be tardy
  • Why we return library books on time
  • Why we have homework
  • Why we use pencils instead of pens
  • Why we don’t bend the pages of a book
  • Why we stack chairs at the end of the day
  • Why we take standardized tests

The creativity in the “real” reasons why we do these things was fantastic. Here’s an example from one of my students:

We wrote our final drafts on our iPads in Pages using the Visual Report template. That helped tremendously with the formatting.

I’m planning to share several of these examples with my students next year, and I will definitely do this activity again. My students enjoyed it so much that several of them were talking about making other “spin-off” books such as The Secret Knowledge of Minecraft Players or The Secret Knowledge of Readers. I’m sorry that I didn’t get to see how those turned out as well.

If you’ve never read The Secret Knowledge of Grown-Ups, I highly recommend it. It’s great for sparking creative writing ideas, and it can provide a fun writing activity in the late stages of the year.

What are some other school rules you can envision your students writing about? I’d love to hear your ideas in the comments!

BLACK WALL INTERIORS DESIGN IDEAS FOR A MODERN HOME

Are you brave enough to try a deep impression on the black walls at home? A dramatic effect can be created on the walls of blacks is unique, and it takes courage and commitment to create an interior decorated with beautiful black walls. A black-painted walls, chalkboard walls, elegant black background, or even some black accents can change the look of the interior.

High ceilings and lots of natural light conditions seem to enjoy blacks the walls in my room, but even the smallest spaces can look modern and stylish, if all other elements are chosen to enhance the contrast and the dark walls. Some of you are going to see the inside is a piece of furniture in bright colors and decorations that mitigate the effects of black walls, others will benefit from natural light, some are painted on wood or walls, wallpaper, and applications – but all ideas have two things in common: the courage and well-designed structures.

BLACK WALL INTERIORS DESIGN OFFFICE FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN OFFFICE FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN DINNING ROOM FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN DINNING ROOM FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN BEDROOM FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN BEDROOM FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN KITCHEN FOR A MODERN HOME

BLACK WALL INTERIORS DESIGN KITCHEN FOR A MODERN HOME

DECORATING IDEAS FOR GIRLS BEDROOM GOOD

True, the fairy tale castles and princesses to provide a wide range of ideas for rooms, but today, we would like to show you something new: the heart. You have seen the newspaper attracted to each student a sheet of paper or sticker. It is a known fact: girls love hearts. Therefore, these six theme rooms under furniture in cardiac function. The colors are also typical of girls (pink, light green, yellow, red, light blue). Chairs, pillows, blankets, nothing has escaped the powerful heart-shaped plan.Some these interiors are a little crowded for our taste, but again, this is not our goal manufacturers.

DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

DECORATING IDEAS FOR GIRLS BEDROOM

DECORATING IDEAS FOR GIRLS BEDROOM

Health Concern: FAT? continue…

How much Fat do you Need?

Very little. Just about any food you can think of contains some fat, and when your diet is made up of at least 75 percent vegetables, fruits, and grains with a few nuts and seeds but without added oils, fats, cheese, or butter, as in the Lifestyle Diet, about 15 percent of your calories will be in the form of fat anyway. This is all you need. The body is capable of making its own fatty acids from the foods you eat with the exception of linoleic acid, and the mere three grams you need per day is more than supplied by eating a couple of tablespoons of sunflower seeds or one small dish of oatmeal. Even leafy green vegetables such as kale or spinach contain about 10 percent of their calories in fat. It is hard to be fat-deficient. Studies of people put on very low-fat diets, even when as little as .7 percent of their calories are taken in the form of fat as linoleic acid, have shown no adverse physical or psychological effects.

Diet Start

Even official bodies have recently begun to recognize the need to reduce dietary fats for the sake of preserving health. The U.S. Senate’s Select Committee on Nutrition and Human Needs recommended in its report “Dietary Goals for the United States” a reduction of fat intake from the present 45 to 30 percent as well as a decrease in sugar consumption to 15 percent of total calories and a corresponding increase in the consumption of complex carbohydrates—the fruits, vegetables, and grains that are the foundation of the Lifestyle Diet. For long-term health and beauty, you should make an even greater reduction so that only about 15 percent of your daily calories are taken in fat.

This is in line with the Pritikin and other low-fat, low-protein diets which have recently caused great interest in both the medical profession and the general public. Pritikin recommends a diet of 80 percent complex carbohydrates, 10 percent protein and 10 percent fat. Although a radical departure from the traditional British, European, and American dietary habits, regimens like the Pritikin diet can not only substantially reduce cholesterol and triglyceride levels, high blood pressure, and high blood sugar, but can also lead to an automatic weight loss and leave people feeling and looking years younger. Such a low protein, low fat diet can also literally beautify a woman both physically and psychically.

At first such a change takes a bit of getting used to, but soon it becomes second nature and the increased vitality, slimness, and good looks it brings you in a few weeks help make it an easy way to eat permanently.

When these are broken down slowly throughout the day, they provide the pancreas with a steady flow of glucose at a rate of about two calories a minute. When you eat something sweetened with refined sugar, the glucose poured into the system (say 100 calories or more all at once) suddenly soars. So does the production of pancreatic insulin in reaction to the insult. When this insult occurs repeatedly, as it does in the usual Western diet, with its average of two pounds of sugar per person per week, the blood sugar levels become depressed, then soar, then become depressed over and over again by a pancreas made trigger happy. In many people this leads to hypoglycemia or low blood sugar, with its corresponding fatigue and mental and emotional symptoms. It can also result in diabetes and in the development of allergic reactions to foods and to petrochemicals, which have recently been linked with diverse mental disorders as well as many acute and chronic forms of illness.

Repeated eating of sugar and products containing it can also result in deficiencies in the B-complex vitamins and an imbalance in certain important minerals. And just in case you are reassuring yourself that you, after all, only eat raw sugar, you should know that one sugar is just about as bad as another. Raw sugar does contain some of the natural vitamins, minerals, and fiber that are found in the sugar beets or sugarcane from which the sugar has been taken but raw, brown, and turbinado sugars are all still highly concentrated simple sugars which create the same metabolic problems as white sugar. As such, they are potential disease-makers. The Lifestyle Diet excludes every form of refined sugar—from chocolate to jams to packaged breakfast cereals with their hidden sweetness. It does allow a little honey for sweetening muesli (two tablespoonfuls a day) plus one tablespoonful of blackstrap molasses if you want it for its nutritional value.

Teachers’ voices matter, and I want to hear from you!

Hi bloggy friends! I know it’s been forever since I’ve updated this blog, and trust me — lots of ideas are percolating in the hopper about my flipped(!) fourth grade classroom and other things I’ve tried this year. I promise those posts are coming! But in the meantime, I need your help!

As some of you may know, I’m working on my PhD in addition to teaching fourth grade full-time. The work-life balance has not been an easy thing, and now, I’m really working hard to finish as much coursework as possible in the short term because baby #2 will be arriving in November! (So while you all are hanging out by the pool having tasty margaritas, I’m crunching numbers for a stats class and reading about how to write ethnographic fieldnotes. Good times, I tell you…)

This summer, I’m starting to work on my dissertation, and I’m testing out my ideas in a pilot study. I’m planning to write my dissertation about the amazing elementary blogging community and the ways that teachers use blogs for professional development and personalized learning. I know that reading other teachers’ blogs has been hugely inspiring for me as a teacher, and I can’t imagine what I would do if I didn’t have access to so many great teaching minds across the globe. Shockingly, however, very little has been written about these great online communities and their benefits, and I want to explore that further. Scholars, politicians, and administrators need to know how much teachers learn from each other! Which is why I need your help.

I’m looking for a few teachers who would be willing to be interviewed about how they use blogs to support their work in the classroom. I want to talk to both bloggers and readers, so even if you don’t have a blog of your own, I’d still like to talk to you. This first wave of interviews will take place next week (June 20-26) and they will all be done online via Skype or Google Hangouts. I anticipate that each interview will last 45-60 minutes.

If you are willing to participate, could you please fill out this form so I can contact you directly? In exchange for your time, anyone who participates in an interview will receive up to $20 worth of free products from my TpT store.

Loading…
Once you fill out the form, I will be in touch to arrange a time that will work best for the interview. I need to conduct (and transcribe!) at least 3 interviews next week to fulfill the requirements of my current coursework, but don’t let that small number deter you — I will need many more interview participants once I move beyond my pilot study and begin work on my actual dissertation, so I’d love to have a list of possible interviewees already started. And my offer for the free products from my TpT store will still stand.

I hope that you will consider participating! I look forward to talking to you and learning from you.

Health Benefits of Raw Sapodilla Fruit

HEALTH BENEFITS OF RAW SAPODILLA FRUIT

Health Benefits of Raw Sapodilla Fruit – Sapodilla fruit ripe has frequently we eat and has a sweet and tasty on the tongue, but have you ever you feel the sapodilla fruit still raw and half cooked. Raw sapodilla fruit flavors have mingled bitter sweet and would make for the consume gummy mouth.
But so, sapodilla fruit raw to have efficacy as well as the benefits for the health of the body, because the content of vitamins and anti-oxidants in raw amber is very much beneficial for the body to be away from the body of free radicals that often affects the skin of the body.
For those of you who do not want to consume Raw sapodilla fruit, here we will provide information on the benefits Raw sapodilla fruit for health, hope to be an inspiration and encouragement for you to consume the sapodilla fruit.
Health Benefits of Raw Sapodilla Fruit - 1
Benefits of Raw Fruits for Health
1. Can Overcome Diarrhea Naturally
Benefits of sapodilla fruit raw to health is a drug, diarrhea or loose stools are very powerful. High fiber content in the raw sapodilla fruit is very good in addressing the problem of diarrhea.
How to apply the sapodilla fruit for diarrhea medicine there are two kinds :
Method 1: Take a Raw sapodilla fruit is still fresh and peeled skin, and scar the flesh as well as brewed with warm water to one cup, let stand for 10 minutes and drink the water until they run out, do this way for 2 times a day.
Method 2: Take the sapodilla fruit, half-cooked or Raw, and remove the skin, remove seeds also give a little warm water and also give 2 tablespoons of honey. Drinking Raw sapodilla juice twice a day.
Health Benefits of Raw Sapodilla Fruit - 2
2. Can Treat Dysentery
Benefits of sapodilla fruit raw to the next health is to treat dysentery. Dysentery can be cured by eating raw sapodilla fruit. Take some sapodilla fruit peeled raw and coolies, chew the flesh as he added a little salt on the fruit, eat little by little until the end of sapodilla fruit. Apply 2 times a day until you disappear dysentery and cured.
3. Can Treating Inflammation of the Mouth
Benefits of sapodilla fruit raw to health can also be a natural cure inflammation of the mouth. The trick is to take the sapodilla fruit and splitting it into several parts (after peeling).and sapodilla fruit that has been cut is boiled with 1 cup of water until the water changes color. Wear this sapodilla fruit boiled water to rinse. Do it until the water runs out, do it twice a day until the inflammation of the mouth healed.
Thus some of the benefits of raw sapodilla fruit for a healthy body. Hopefully with this short article can add to our knowledge of traditional medicine wear natural fabrics such as sapodilla fruit. Hopefully this article Health Benefits of Raw Sapodilla Fruit that we share today can be beneficial for you. Thank You.

No Backtracking

No Backtracking principles

This is a plan for life. You will carefully reintroduce certain carbohydrates into your diet — and find the balance that maintains your weight and keeps you feeling trim. This crucial phase will allow you to:

  • Establish the carbohydrate levels that you can eat in order to remain slim and supply your energy requirements
  • Break totally with bad habits made in the past
  • Never return to yo-yo dieting
  • Find a healthy attitude to food and a viable eating plan for the rest of your life.

No Backtracking rules

During this phase you need to:

  • Increase your daily carb intake by no more than 10g (1/3oz) each week
  • Add new foods one at a time
  • Eliminate a new food if it provokes weight gain; a return of physical symptoms lost during the Fast-Track Plan; increased appetite, cravings or water retention

Diet Start

  • Drop back to the next-lowest level of carbohydrate intake if you gain weight
  • Carry on eating adequate amounts of healthy fats and lean protein at every meal to ensure a balanced diet
  • Continue to take vitamin and mineral supplements regularly, drink masses of water and, of course, exercise regularly.

Make this diet the one that works

Once you have reached your target weight, you can start on the No Backtracking plan. Increase your intake of carbohydrates by 5-10 grams per day until you reach your optimum level for weight management This will probably be around 40 per cent of your total daily calorific intake, but remember that everybody differs, especially when you consider activity levels.

If you have high insulin resistance, then you may have to Keep on Tracking and be careful about how many carbohydrates you consume on a daily basis. But if you’re one of the lucky ones with low insulin resistance, you may be able to eat most vegetables (including starchy vegetables), fruit, pulses andwholegrains such as oats, barley, millet, wild rice, couscous and buckwheat. You can also begin to use recipes containing carbohydrate ingredients such as breadcrumbs; you may even be able to handle an occasional potato. But don’t eat all these things in one day. You still have to monitor your carbohydrate intake to stay where you are – healthy and energized. Remember the eating habits that got you here in the first place. You should have successfully gauged your ideal carbohydrate level, and be maintaining a stable weight and energy levels, within 4-12 weeks of following the No Backtracking plan.

Stick to the basic weight management tips and try to be good 80 per cent of the time. We are all allowed the odd slip up – if you want a slab of chocolate cake from time to time, make sure it is the best you find and enjoy it. If you ever see the scales creeping up, cut back, even go back to the Fast Track plan for a few days until your weight is back to normal, and then gradually raise your carbohydrate levels once again.

A template for life

Two portions of higher GI carbohydrates are included per day on the suggested eating plan. Treat this as the template you ought to follow from now on. And try some of these tricks to keep your carbohydrates at a moderate, healthy level:

  • Opt for rye bread, oatcakes and rye crackers instead of wheat-based bread. Even if you are not wheat-intolerant, it is worth considering this.
  • Eat fruit 20 minutes before eating anything else, not afterwards. Fruit takes less time to digest, but if eaten on top of a heavy meal, can cause bloating.
  • If you are going to drink alcohol, choose dry white wine or, even better, red, which contains flavonoids with antioxidant and anti-platelet properties thought to reduce deaths from coronary artery disease. If you have managed to kick the alcohol habit, opt for grape juice, which contains flavonoids similar to those in red wine.
  • Mix sweet potato with cauliflower as a mash or purée to go with roast chicken. The aim is to mix a high GI vegetable with a low one, to reduce the total carbohydrate level.
  • When making a rice dish such as risotto, reverse your ratio of vegetables to rice: add a little rice to a heap of vegetables. And try grating raw vegetables such as carrots and courgettes into the dish at the last moment – it adds texture and you get the benefit of all those raw phytonutrients.
  • Don’t give up on those whey-protein smoothies – they are still the most effective way of getting high-value biological protein.

a friendly stopped by to say hello, at 5000 feet

The video shows a man flying calmly, when suddenly a military fighter appears out of nowhere. After quickly moving the wings up and down in greeting, the plane disappears from the sky at a speed worthy of a video game or a movie

The Game Tips And More Blog’s Ludo Ludi (Game Play) #1-3

I wanted to start a video series that was Random Gameplay Video Clips that I have collected over time. I started out calling it FLASHBACK, creating a logo for it and everything; but I wanted a way to archive/share them out a little bit faster/easier, rather than ‘Featuring’ them every time, so I came up with the concept of “Ludo Ludi”.

It means “game” and “play” in Esperanto. The idea was to not label the gameplay clips or state what they are, in order to have other people enjoy the “surprise reminiscence” of the games. Viewers could try to guess what they are for fun or just enjoy them as part of a playlist where they didn’t know what was coming next. For the most part it would be easy to guess them of course; if you played the game, you’ll know what game it is and what class I played, etc.etc. But, I still thought it would be entertaining to have a bunch on a playlist of some sort, with no obvious names, having a transitory video (without logos/intros) of something loopable such as static – as though changing the channel on a television – in-between videos. With Youtube’s Playlist and Randomize features, this can now be done and one can sit and reminisce on games of yesteryear with my video clips showing snippets of gaming moments recorded from a wide variety of games! Everyone with ADD/ADHD can just click the Next button on the playlist to skip to the next one if the current one isn’t holding their interest! Everyone is a winner! With this in mind then, I now present one long paragraph and the first three installments of :

The Game Tips And More Blog’s New Gameplay Video Series, “Ludo Ludi (Game Play)”





Enjoy and See You In The Games!

Why you will lose false fat

Donna didn’t look fat, at least not in the leggings and long sweater she was wearing as she entered my office. Her legs looked slender and fit, and her sweater hid the rest. But she felt fat.

`I’ve got a guy’s type of weight problem,’ she said as she sat down. She was animated and energetic, but obviously frustrated. ‘Women are supposed to collect fat in their hips and thighs — aren’t they? — but mine sticks right here.’ She patted her stomach. When she was sitting, I could see that it bulged, even under the thick sweater. ‘I hardly ever overeat,’ she said, `but since I’ve hit 40, I get no forgiveness from my body. It’s like my metabolism took early retirement. I take two bites and I can feel the fat cells around my waist start to expand. Literally. I pinch my love handles, and they’re thicker before I even get up from the table.’ She looked at me expectantly, as if I might not believe her. ‘My last doctor,’ she said with a sour look, ‘told me there’s no way that food could make me fat that fast. But I can feel it happening.’ Again, she searched my face for reassurance. She had an upbeat personality, but she was almost ready to give up. She ate carefully, exercised hard, and still carried 20 extra pounds.

Diet Start

`It’s not your imagination,’ I said. ‘That feeling of instant weight gain happens to a lot of people. But it’s not fat you’re gaining. It’s fluid retention and bloating, and you’re probably getting it from food reactions. A lot of the swelling and bloating from food reactions occurs directly in and around the gut.

That’s why you feel it in your midsection right away.’

`If it’s not fat,’ she said, ‘why doesn’t it leave as fast as it comes? I look like this almost all the time.’

`Your biochemistry won’t allow it to go away, because your body is trying to protect you. When you eat reactive foods, your body sees them as foreign substances, almost as poisons, and it goes all out to protect you. It can take two to three days to stop reacting to some foods.’

Tut it’s not like I eat junk. I’m an old-time you-are-what you-eat type. I was eating granola before they even had a name for it.’ She smiled, but I could see she felt cheated. For many years, she’d followed all the rules — but the rules had been wrong.

`People can become reactive to healthy foods,’ I said, ‘even granola, if you eat it all the time. Do you eat a lot of non-fat and artificially sweetened foods?’

`Now that my metabolism has slowed down, I’ve got to.’

`I hate to say it, but some of those “lite” foods may be doing you more harm than good. If you’re reactive to a food, it can be virtually calorie-free and still make you gain weight. Even diet soda can cause bloating and swelling.’ She looked surprised. Most people these days are so accustomed to counting calories and fat grams — the quantity of their food — that they forget about the importance of quality.

`I don’t think you’re eating too many calories,’ I said. ‘And I don’t think your age is the real problem. Your metabolism is slowing down just 5 per cent every decade, and that’s not enough to cause what you’re experiencing. I think you’ve just developed some food reactions over a long period of time. When you resolve them, you’ll lost your weight.’

Tut I was tested for allergies and they didn’t find any.’ `Did they explain that not all food reactions are allergies?’ I asked.

`No.’

I wasn’t surprised. Most doctors don’t really understand food reactions. They usually have an all-or-nothing attitude; they think that you either have a classic food allergy, with hives and wheezing, or you have nothing at all.

I gave Donna a brief rundown on how food reactions work and how they cause bloating and swelling. I explained it out of respect for her. Some doctors think it’s acceptable to tell patients what to do, without telling them why, but I object to that approach. If patients are willing to change their lives by taking my advice, they deserve to know exactly why these changes will help.

As I gave all the details to Donna, she listened attentively and took notes. Over the next few weeks, she eliminated her false fat foods — one of which was oats, a primary ingredient in most granola — and dropped about 15 pounds.

Now I’ll give you the details on how food reactions get started. Then we’ll look at how they cause bloating and swelling.

If you’re going to make changes in your life, you deserve to know exactly what’s going on.

I’m sure some of this information will hit home. Often, when I tell patients about food reactions, they say, ‘That’s me you’re describing.’

Free Weekend – Overwatch and Fallout 4 [Notification]

Just a quick notification for those that didn’t know, that this weekend is a Free Weekend for two great games: Overwatch by Blizzard Entertainment and Fallout 4 by Bethesda Softworks.
To commemorate this amazing alignment of the planets that these two behemoths occupy, I created this ‘Mash-Up’ Image Header as a Reminder, which I will release as a Full-Sized Wallpaper, for fans of these two franchises, once it is complete… Soon™

A big fan of both companies’ products, I was so excited about it – but I haven’t had a chance to play yet! So, I’m trying to help out all of you fellow gamers and notify you that these games are Free and Playable all weekend – including being sold at lowered prices – but it’s almost over! Get out there and jump in – and have fun! GOGOGO

See You In The Game!

Multi-Protocol Label Switching (MPLS)

Today the division between routers and switches is a fine line. Whereas switches were initially designed to help segment a LAN into multiple collision domains, and thereby allow you to extend the reach of a particular LAN topology, switches have moved higher up the networking ladder. When switching is used in a LAN to connect individual client and server computers, the process is known as microsegmentation, because the collision domain has been reduced to just the switch and the computer attached to a port. Switches at this level generally work using the hardware (MAC) addresses of the attached computers.

Layer 3 switching moves switching up the ladder by one rung by switching network frames based on the OSI Network layer address—an IP address, for example. But wait, that’s what a router does, isn’t it? Of course. A layer 3 switch is basically a router, but it implements most of its functions in application-specific integrated chips (ASICS) and performs its packet processing much faster than does a traditional router, which uses a microprocessor (much like a computer CPU) for this function.

Internet 2010

When you get to the top of the ladder, where large volumes of data need to be routed through a large corporate network—or the Internet, for that matter—even the fastest traditional routers or layer 3 switches easily can become bogged down by the volume of traffic. Because of this, the core of a large network traditionally has been built using ATM or Frame Relay switches, and IP traffic is sent over these switched networks.

To speed up the processing of routing packets at high-volume rates, a newer technology has been developing over the past few years and goes by the name of Multi-Protocol Label Switching (MPLS). MPLS is covered in the next section.

Combining Routing and Switching

Traditional routers have a large amount of overhead processing they must perform to get a packet to its destination. Each router along the packet’s path must open up and examine the layer 3 header information before it can decide on which port to output the packet to send it to its next hop on its journey. If a packet passes through more than just a few routers, that’s a lot of processing time. Remember that IP is a connectionless protocol. Decisions must be made about a packet’s travel plans at each stage of its journey through the network. The solution to this problem lies in newer technology—high-speed switching. Specifically, Multi-Protocol Label Switching, which is discussed in the next section, combines the best of routing techniques with switching techniques.

When you look at concepts such as ATM or Frame Relay, which are connection-oriented protocols, this isn’t the case. Instead, virtual circuits (either permanent or switched) are set up to connect to endpoints of a communication path so that all cells (as in the case of ATM) or frames (as in the case of Frame Relay) usually take the same path through the switched network.

My trip to Dhaka, Bangladesh, November & December 2010 & January 2011

January 2011

Back again at the Hotel De castle; it looks like I have spent more time here in the past 3 months than at home.

The original brief was to develop a Sustainability Plan for the organization. However, most managers confuse it with Resource Mobilization / Fund Raising Plans. Typically a Sustainability Plan involves a risk analysis of the organization comprising of Board, Executive Leadership, Resource Audits (Man, Money, Material & Technology / knowledge), HR, ICT, Finance and other support services systems audits plus a host of other environmental issues.

I cleared up this confusion and came to develop a Resource Mobilization Plan (Only Money); however, the team has not completed the budgets. So have to delay the process by a few days. Meanwhile I witnessed riots in Dhaka due to stock market crash yesterday. Stock price manipulation rings were very active in DSE over the past year and sent the stock prices way up beyond the wildest PE ratios possible for some companies. Just like what’s happening at the CSE in Sri Lanka. Most stocks trade much higher than PE ratio. Is this a prelude to what we can expect in the streets of Colombo I wonder?

Finally managed to develop the RM Plan for the organization; this is the end of the assignment for me and look forward to going back to Colombo.

December 2010

It’s good to be back in Dhaka and at the Hotel De Castle. Guess what its Harthal season again! I was in Bangladesh in 2006 and in 2008 for the then famous Harthal “Save Democracy” which was a success in overthrowing the elected government and appointing a caretaker government. However, during Harthal the general public and the visitors to Bangladesh suffers by having severe restrictions in free movement. I will spend 2 weeks in Dhaka for this assignment with the intention of developing the Vision, Mission, Values and Strategies of the organization.

It was hard work but managed to develop the Vision, Mission, Values and Strategies for the organization. During this process there was a one day Harthal, but it seems to have been a flop! What’s going on here, have the people finally realized not to go on Hartal for silly things? Well, we will just have to wait and see.

As part of the assignment I had to help the management team present the Vision, Mission, Values and Strategies to the board and get their comments and final approval. However there is an issue. The issue is that; the roles and responsibilities of governance and the executive branches of the organization are not clearly delineated to ensure efficient operations. In short there is a power struggle between the two. I have to manage this delicate process; otherwise all hell may break loose during the meeting and true to form, the consultant will be the fall guy.

You can read my article titled “Governance – Do we need to build capacity?” published in http://capacitydevelopment.ning.com/

The meeting with the board went off without any major hiccups and got the necessary approvals and consent for the next stage of the assignment.

November 2010

The assignment I undertook was to develop a new Vision, Mission, Values, Strategies and a corresponding Resource Mobilization plan and support services (Finance HR & IT) plans for Acid Survivors Foundation ASF http://www.acidsurvivors.org/ of Bangladesh. I will be staying at the Hotel De castle in Banani, Dhaka.

I must say that I was quite shocked at the number of people being attacked in Bangladesh and the physical and psychological damage it does to people. The major cause of attacks was economic (Dowry & Land). Given the poverty levels in Bangladesh I must say that I am not surprised. Having enough resources to go around for 160 + Million people is not a joke.

The irony is that at the United Nations (Put UN Web Site) review of the Millennium Development Goals (Put MDG review results Web Site) it was concluded that mot poor countries (including Bangladesh) were failing miserably in trying to reach the MGD’s. In my Humble opinion this is because most poor countries are not dealing with the white elephant in the room i.e. population growth. This is obviously considered a sensitive subject given the reluctance of politicians to take on the religious establishments head on be it Islam or the many denominations of Christianity. On the contrary this should be the main subject of discussion by far thinking politicians the world over.

For instance if Bangladesh were to implement strict policies to have ZERO growth in population for the next 10 years it would develop at a faster rate As even the slightest growth in the nations wealth will be held by a content population. This is common sense.

Most people misunderstand when we talk about zero population growth. They think that you are suggesting that people stop having children. In fact it does not mean that at all. It just means that your birth rate has to be equated to your death rate.

In the case of developing countries; the way that externally funded development sector project are implemented creates further frustrations within a given population and at times directly create political and social unrest. Most development sector professional (from the north countries as well as the south countries) don’t even understand this themselves. Consider the following. Most western donors advocate rights based projects. This means that all citizens will demand equal levels of services from the state irrespective of economic, social, political, ethnic or religious status. This in a developing country means that “now” 10,000 people line up for services as opposed to 1,000 people. The issue is that the rights based development project itself does not have any or enough funding to cater for the newly generated demand. The funds are only available to create and sustain the demand by the citizenry. So now the poor government has to serve a larger number of people with the same or slightly increased budget. This only means that in order to cater for the quantity the quality of services will be compromised. This is OK with the rich citizens as they can afford to pay for services by the private sector or bribe the state employees or use influence to get a better service from the state service provider.

One can argue and say that this is a deliberate attempt by some of the donors to create instability within developing countries. I am not a conspiracy theorist but I wouldn’t put it past some of them. The point is that we who hail from the developing countries must act a lot smarter than we currently do if we want to develop.

As for me the assignment will run in to the New Year and I will have to go to Bangladesh a few more times to finish the assignment.

Are You Ready for NaNoWriMo?

I plan to encourage my students to participate in NaNoWriMo again this year. For those of you who aren’t familiar, November is National Novel Writing Month, or NaNoWriMo for short. It’s the month where tell your inner-editor to hush so you can just let the ideas flow on to the page. It’s about getting something done without worrying how perfect it is, because you can always go back and revise in December.

Last year, as October drew to a close, I introduced NaNoWriMo to my class. I explained the premise, and gave them the option of taking on the challenge. We talked about word count goals and commitment to writing outside of the classroom. Then the fun started. Student after student signed up, each cheering each other on as they dedicated themselves to writing a book. In the end, I think all but two students decided to participate. We had weekly lunch meetings where students could eat and share their writing with friends, and although not all students met their goals, they definitely started to find their voices as authors.

The Young Writers Program for NaNoWriMo has some great teaching materials to get your students psyched for NaNoWriMo and to teach them about narrative writing in general. You can check out their website at http://ywp.nanowrimo.org/. In addition, there’s still time to order a NaNoWriMo classroom kit which comes with a student goal setting poster, NaNoWriMo stickers to track progress toward a goal, and buttons for those students who participate or finish. The classroom kit is free (and awesome), but they request a $10 donation for the materials — a small price to pay to get your students excited about writing.

In honor of NaNoWriMo, I’ll be hosting a month-long link-up that will start on November 1 and run the duration of NaNoWriMo. Whether your class officially participates in NaNoWriMo or not, I hope you’ll join me in sharing the great writing work that’s happening in your class. Grab the button, spread the word, and meet me back here on November 1st for a writing extravaganza!

In the meantime, check out the Educators’ section of the Young Writers Project. I’m sure you’ll find plenty to get you (and your students) excited for a month full of creative writing!

Who’s in?

And More: Deal and Sales – Battlefield 4 Expansion, Second Assault is Free from EA – Two Days Left [Notification]

Just a quick mention, for those who didn’t catch it yet or for those who play [or never stopped playing!] Battlefield 4Second Assault, the Expansion pack that adds Four Maps, Five Weapons, Ten Assignments and more, is currently being given away Free from EA/Origin until the 28th – that’s only two days left to go get it!

Battlefield 4: Second Assault Expansion Pack Information Panel
in the “On The House” Section [ Free Games > On The House] in EA’s Origin Game Client (Click to see Full Size)

Note that you need to already own Battlefield 4, as this is an Expansion Pack, but you can still get it now – even if you don’t own BF4 – and play it later. Go and Download it now! GOGOGO

Battlefield 4: Second Assault Expansion Promotional Wallpaper by EA, Unedited
(Click to see Full Size)

See You In The Game!

Tune Into Technology Linky: Integrating Technology into Reading

I’m excited to be linking up with iTeach 1:1 and Learning to the Core for their new series Tune into Technology. This week’s topic is Integrating Technology into Reading, so I wanted to share 5 strategies I use to do this.

1. Let kids annotate their reading with GoodReader.



I’ve talked about this app before, but it’s one of my favorites. GoodReader allows you to annotate pdf documents. I use it for almost all of my professional reading, and I’ve converted several documents into pdfs for my students as well. It’s a fantastic tool because my students are able to leave “think marks” all over their reading, and I don’t have to worry about them writing in a book or leaving sticky notes everywhere. We’ve even developed our own codes for how to use the annotation tools.

2. Share favorite books on KidBlog.

My students LOVE sharing the books they’re reading on KidBlog, and they especially love reading and commenting on each other’s blogs. I’ve talked more about how we do this in a previous post.

3. Create Book Trailers in iMovie.

Some of my students began doing this for fun at the end of the school year when we became a 1:1 iPad classroom, and I will definitely be doing this more next year. iMovie has some great templates built-in for this, and my students loved being able to share their favorite books through this medium.

4. Create book clubs and discussion groups on Edmodo.

We started using Edmodo at the end of the school year, and it was a great way to get conversations started or keep them going about the books we were reading in class. You can read more about getting started with Edmodo in my paperless series here.

5. Use Evernote and GoodReader to assess reading.



I use the running record templates from the Reading & Writing Project at Teacher’s College. Because they’re pdf files, I can annotate them in GoodReader, and I can record students while they’re reading in Evernote. I’ve written a complete tutorial on how to do this here.

How do you integrate technology into reading instruction in your classroom? I’d love to hear your ideas. And be sure to link up with the Tune into Technology linky!

And don’t forget to join us for the Southeastern Blogger Meet Up. Click the button below to get the details and RSVP!

And More: Deals and Sales – Free from EA, Battlefield Hardline’s Betrayal Expansion/DLC, Until July 12th [Notification]

Just a quick Notification, for those interested in Battlefield Hardline, that an Expansion for it is currently being offered Totally Free from EA via their “On The House” promotion:

Screenshot of the Information Panel in the Origin Client for the Battlefield DLC/Expansion, Betrayal
(Click to see Full Size)

Free right now, EA is offering the Expansion for Battlefield: Hardline called Betrayal, which features 4 new maps (Thin Ice, Chinatown, Cemetery and Alcatraz), 2 New Vehicles, New Weapons (Personalize up to 5 Weapons with the Gun Bench and Test Weapons in the Gun Range!), New Assignments, New Camos, New Paints, and more [Inquisition Swooooord!lol]. While it does require the Base Game Battlefield: Hardline, even if you don’t own Hardline itself, you can Add it to your Origin Games Library and then Download it when you get Hardline in the future. If you are a Subscriber to Origin Access, you already have this available, for ‘free’ (it is part of the Vault Games available to you).

The Expansion/DLC itself was originally released in March of 2016 and although it may not help with there only being a handful of servers in North America on PC with a high number of players on them (there are a lot more if you are part of the EU), it is still worth going and grabbing [in my opinion, especially if people end up coming back or playing more in the future. I have already seen an influx of new players, thanks in part to EA’s recent Up-to-75% Off Sale and DLC Giveaways].

I have also been working on a “One Sentence Review” of all the Weapons in Battlefield: Hardline that I want to post here at The Blog in the future; but for now, if you are interested at all in Hardline, grab this while you can – and See You In the Game!

[Personal Note: I am not affiliated with, nor receive any benefits of any kind from EA/Origin (check the Links, there are no ‘Affiliate Tags’ or anything on them); I am merely an enthusiastic gamer who tries to pass on information to other gamers, when I can. Enjoy, dear reader.]

How to Create a Lower Body Band Training System

Resistance training bands provide a great strength curve that matches the lower body strength curves nicely.   Specifically, the more you stretch a band the higher the level of resistance you have to overcome.   In the case of the key lower body movements such as squats, deadlifts and lunges this matches the strength curve of these key movements meaning that the muscles are capable of producing the highest levels of force at the top of the movement when joints are extended and muscles in their shortest position.
The trick is how to apply band resistance to these movements and other functional movements such as jumps.  While there are many different techniques for accomplishing it – one of the best is to create your own lower body band loading system using a large band as a belt and smaller band/s looped through it and onto your feet to create load from the hips down.

This system puts no load on the spine,  and it is easy to increase or decrease load based on band sizes used and number of times you wrap the band around your feet.
It travels with you as you move for extra load for all lower body movements including squats, lunges, and deadlifts.    It is also a portable jump training system that is easy to create, and for facilities with the reACT Trainer it is a fantastic way to create additional overload on the reACT Trainer while keep the hands free!

Click here to see step by step instructions for how to use bands for this set-up:   https://www.youtube.com/watch?v=zkAMGtjkVm4

WORKOUT ANYTIME in the Jacksonville Daily Record

WORKOUT ANYTIME in the Jacksonville Daily Record

WORKOUT ANYTIME was recently featured in the Jacksonville Daily Record. The article talks about the new WORKOUT ANYTIME that opened up Monday, October 6. The article talks about how the Levitt family looks to open 15 WORKOUT ANYTIME locations in the next 5 years in the Jacksonville area. 
View the full article here. 

HOUSE OF INCLUSION Koichi Kimura Architects

House of Inclusion” as-is called the firm FORM / Koichi Kimura Architects, is a home to extraordinary volumes built a new residence in Shiga, Japan …
“Every piece of this house has been designed so as to bathe in natural light to enhance the simple beauty from within” confides the Japanese architecture firm.We observe different windows and niches of light placed at strategic locations and atypical of this house of 151.71 m2.
A small patio is flirting with the wall on the outside and the living / dining room of the house.

HOUSE OF INCLUSION Koichi Kimura Architects
MODEL HOUSE OF INCLUSION Koichi Kimura Architects
EXTERIOR HOUSE OF INCLUSION Koichi Kimura Architects
DESIGN HOUSE OF INCLUSION Koichi Kimura Architects
INTERIOR HOUSE OF INCLUSION Koichi Kimura Architects

Superb materials were used for interior decoration, we welcome in particular the sublime and the bedroom floors polished concrete … WE LOVE IT!
The architects of the firm FORM / Koichi Kimura tell us more about this house. This house, Located in a new residential area, is for a 30-something couple. Surrounded By Other House, The Design Goal Was Set Up to block out the Outside world while Avoiding too much closure, as well as “to Provide Rich and sensuous spaces.
First, a small patio and a path connected to it Were Laid Out Between The living / dining room and exterior. They Are Surrounded by a wall That blocks off the line of sight from outside. Planting and lays out are ugly At The patio, so thats the picturesque images of green and water are Viewed From The rooms.
Enclosed by walls create indirect light That softly filling The Entire room, tea house presents scenes sentimental Here and There. The Living Space And The Life Lived There are enveloped by green and light, Creating an affectionate environment.

Foam Rolling aka Self Myo-Fascial Release

Using a tubular foam roller to literally roll over tight areas of muscles and tendons is known as “Myo-Fascial Release”.    While it seems counter-intuitive applying steady pressure to muscles and tendons with an emphasis on trigger points (areas of tightness and soreness) has been proven to be a highly effective method for improving mobility.    
Since you are in complete control of the amount of pressure applied and how long it is applied you can customize the experience based on your level of sensitivity.   Key areas to focus on include the hamstrings, calves, gluteal muscles, latissimus dorsi muscle, and even low back and hip flexors if done with caution.
You can use a tubular foam roller, and they are made in varying levels of firmness from soft to very firm.   In addition, there are variations that include a textured surface of varying levels from small to large finger like projections.  You can also use balls such as a lacrosse ball, baseball, or tennis ball in a similar fashion.     NOTE:  the smaller and firmer the object the more pressure it will tend to apply so proceed cautiously.
The technique is to position the foam roller on the floor (on a firm but not hard surface is best).  Then position the muscle/s you are targeting on top of the foam roller.     For example, for the calf sit on the floor with your target leg extended so that it is on top of the foam roller with the lowest portion of the calf on top of the roller.    
Use your hands to lift your butt slightly off the floor to allow you to apply pressure down onto the foam roller.    Then literally roll forward slowly over the foam roller paying attention to any trigger points where you notice sensitivity or tightness.   
When you find a sensitive area slowly roll back and forth on the spot until you feel it release.   With a little experimentation you will learn how much pressure and speed work best for your physiology. 
Self Myo-Fascial Release/Foam Rolling is a great way to start a workout and does a great job of safely improving mobility before a workout and is also great to do between workouts.
Contraindications to Foam Rolling
Pregnancy – during pregnancy ligaments become lax and pressure anywhere on or near the abdomen is to be avoided at all costs so best to skip foam rolling when pregnant.
Osteoporosis – soft bones and additional pressure are not a good combination so best to avoid foam rolling without a physician’s permission if you have moderate to severe osteoporosis.
Intervertebral Disc Issues – anyone with disc problems in their spine should be cautious with foam rolling because pressure in the wrong areas can create problems so again get guidance from a medical professional if you have an disc issues in your spine.
Inability to support bodyweight on arms or legs – foam rolling cannot be done safely if a person lacks the strength to support their bodyweight on their arms and/or legs.
For a pictorial guide of various foam rolling exercises to target specific body parts click here:   https://www.pinterest.com/explore/foam-rolling/  

Spotted in a hoarders driverway

the front yard was covered in a variety of junk.

Just run across this while out walking about. I think behind it’s a Corvette, and in front of it was a 1990 is Firebird GTA 

‘Setting Of The Month’: Bandicam’s Xvid Implementation (with Screenshots and Quality Analysis)

As the First Post of a new type of article here at The Game Tips And More Blog
[started due to popular demand!], I would like to explain a bit about my ‘Setting Of The Month’:
What is meant by “Of The Month” (at least at this blog), is less ‘lunar syzygy’ and more ‘what is currently being served’, in concept. Every once in a while I will post what Recording Settings or Rendering Settings I am currently using. I want to begin doing these posts in response to two things:

  • It was requested by you readers! Over the first half of the year, I run a Poll here at the Blog (it is located on the top right panel area) and currently, the single most popular Requested Topic For Future Posts is “Tips and Tricks of Video Capturing and Editing”. Therefore, as part of answering that call ‘by popular demand’, by my respected readers, I want to share as a ‘Tip’ what settings I have been using of late to capture – not to tell you ‘what to use’, but to simply give everyone a suggestion – perhaps even a place to start from, when recording or editing their gameplay adventures.
  • I see ‘settings’ asked about a lot, everywhere. Whether it is in game forums, technical forums, video editing and recording application forums, or even in my Inbox once in a while, people are constantly asking what settings to use, or “what settings do you use” – and that’s great! I’m glad to see helpful replies of others (and sometimes short explanations on how someone is using a specific setting and why). As anyone who has asked me directly knows, I enjoy helping others with suggestions on settings and usually try to explain why I am using one setting over another.
And so, here is the first edition of a new addition to this blog, without further adieu:

 

This Month’s Featured Setting

Bandicam’s Xvid Codec

For the past little while, I have been messing with the Xvid codec – not the ‘official’ one from XviD.org that you have to download – the one that is built-in to Bandicam, easily available via pull-down menu in the Format area, where you choose which codec you want to record with. As of the most recent version of Bandicam [at the time of this post], Xvid is now the Default Codec that is pre-selected, when you install/startup Bandicam. Where in previous versions, a ‘Bandisoft-optimized’ MPEG-1 codec was the Default, now a ‘Bandisoft-optimized’ version of Xvid is thrust into the limelight – and I wanted to test this puppy out and see what tricks it can do!

If you’ve were computing through the 1990’s, you may have heard about the Xvid codec. A competitor to the DivX codec around the turn of the millennium, I am actually going to skip over the history of the Xvid codec [other than this one paragraph]. Parts of such history may actually be a ‘dark affair’ (depending on who you talk to), worthy of it’s own short documentary, as the DivX vs XviD history has some aspects in common to the history of other products and companies that were popular over time [with Saturday Night Television Specials such as “Apple vs Microsoft”, “Xerox vs Apple” and more..]. As with many companies and products in popular use today, they all have “Origin Stories” that you won’t find on The Internet and never will… And Now, Back To Your Regularly Scheduled Program

The Xvid codec is a version of MPEG-4 (it is MPEG-4 Part 2 or “H.263/ASP”), so it is directly related to it’s younger-but-bigger brother, AVC (which is MPEG-4 Part 10 or “H.264/AVC”). As such, Xvid [ASP] does not have many of the functions that are found in H.264 [AVC], such as Deblocking, where the codec will try to ‘hide’ some compression artifacts that occur due to over-compression; but Xvid is still a great codec to record with, it’s main strength being speed. Because it doesn’t have many of the processing functions of it’s more recent and bulkier MPEG-4 versions, it can ‘figure out a frame and save it to a file’ very quickly – which is essentially what is happening, technically, when game recording.

Recording with Bandicam’s Default settings for their implementation of Xvid [designated herein as “Xvid(b)”**, to show that it is the “Bandicam-Optimized Version of Xvid”] will give you a Quality Setting of 80%. The capturing framerate, by Default, is set at 30 fps (Frames-Per-Second). The audio format, in this Default setting, is compressed “MPEG-1 Layer 2” format (MP2) for the Audio. Here is a screenshot showing what all of Bandicam’s Default settings, for their implementation of Xvid, looks like in one image:

The ‘Setting Of The Month’: Bandicam’s Version of Xvid, included with Bandicam (Default Settings)
Click to see Full Size

Below, are a sampling of a handful of games and the framerate performance hits that were seen while recording with these Default Xvid(b) settings (i.e. the differences between ‘playing the game and not recording’ versus ‘playing the game and recording at the same time’):
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }

Recorded Game Title                     Resolution      Performance Hit (Δ)
Hitman: Absolution Benchmark 1366×768 ~ 2 fps
Hitman: Absolution Benchmark 2560×1440 ~ 4 fps
FurMark (Full Run) 1366×768 ~ 2 fps
FurMark (Full Run) 2560×1440 ~ 0 fps
Unigine Valley Benchmark 1366×768 ~ 6 fps
Unigine Valley Benchmark 2560×1440
Batman: Arkham City Benchmark 1366×768 ~ 4 fps
Batman: Arkham City Benchmark 2560×1440 ~ 9 fps
Skyrim (Introduction) 1366×768 ~ 0-8 fps
Skyrim (Introduction) 2560×1440
Minecraft 1366×768 ~ 0 fps
Minecraft 2560×1440 ~ 0 fps

table code created by Danny Sanchez (journalistopia.com)

As you can see in the table above, the difference in framerate between ‘Playing’ and ‘Playing While Recording’ is very minimal [the performance ‘drain’ being accentuated in higher resolutions for most games]. Although only a handful of games were tested, I did try testing both spectra of resolutions possibly in use by the average gamer today, by recording with an ‘enthusiast’ resolution (2K/1440p) as well as a commonly-run laptop/notebook resolution (1366×768) which could also be run by older or less-capable systems. Bandicam’s optimized Xvid performs very well in the tests, with almost as low of a performance change as the ‘super-light-performance-hitting’ MJPEG codec.

Like MJPEG however, Xvid’s weakness is the lack of tools to compensate for compression. Again, I mention here the MPEG-4/AVC ability to somewhat ‘hide’ compression artifacts, with code for utilities such as “Deblocking” built into the codec, where the edges of areas that the codec is making its calculations in are ‘softened’, so that the ‘blocky’ effect of high compression (called Macroblocking) is less visible. In Xvid, there is no such utility, so if too high a compression level is attempted [too low a bitrate is stipulated], then these ‘block’ artifacts can easily be seen, especially in ‘flatter’ areas of a frame (portions of the screen with less color and/or changes happening), as seen in the below frames, extractions from the actual recorded video frames themselves:

[In the examples below, when the compression artifacts aren’t as obvious, I will show the entire screenshot in compressed JPG format, then underneath I ‘zoom in’ to show the compression artifacts from the codec as magnified extractions from the original video frames, in BMP (BitMaP) format. I use sampled areas for that, as full 1440p Screenshots in an uncompressed format would be over 10MB each]

Xvid(b)** at 90% Quality [altered from Default 80% Quality Setting], Battlefield 3.
Click to see Full Size
The result when recording at 90% Quality (up from the Default of 80%) was very satisfactory, with only ‘nit-pickable’ parts to show the codec’s weaknesses, like the Upper Left area of this scene above (with the dark interior areas). Some artifacting can also be seen in the Middle Top area (slightly obvious even in this compressed JPG), where the plain sky areas take the brunt of the compression of this frame taken from the original game recording video produced by Bandicam.

Xvid(b)** at Bandicam’s Default of 80% Quality, Battlefield 3.
Click to see Full Size
The above image is taken from a game recording of Battlefield 3 that had some pistol action going on, with an explosion caught in the background. The quality of Bandicam’s Default setting isn’t too bad and high action scenes can actually look quite acceptable. For example, in this frame above, with the explosion occurring on an upper walkway, only the Right Edge of the explosion (with the debris) has obvious Macroblocking – and the sidewalk [and foliage] macroblocks had to be ‘looked for’ here – and are less noticeable in the moving video. The ‘flatter area’ (with less colour variations) in this scene, is the poster advertisement, which the codec punishes with compression, leaving colour banding and macroblocks evident. The rest of scene is more complicated material and demands the codec to utilize more bitrate, ending up looking not too bad at all, when VBR is used (Variable BitRate, “changing data rate”) mode).

[I personally found that in dark (as in nighttime) scenes, at 80% Quality there was distracting colour quantization (colour quality loss) and macroblocks (little square compression artifacts); but for most material, the 80% Quality setting seems ok to use for Xvid(b)**, most of the time]

Xvid(b)** at Bandicam’s Default setting for Xvid of 80% Quality, the Batman: Arkham City Benchmark.
Click to see Full Size
The above image is an extracted frame from a recording of the Batman: Arkham City Benchmark. A very difficult scene for any codec (unless you tell it to ‘keep all quality, use 100%’ and then don’t mind the larger file size that will be created) it is hard for a codec to decide what to compress and what not to, as particles fly all over the place and light and dark areas shift around as the Benchmark runs through this area with changing levels/regions of Luma [lightness, brightness]. Bandicam’s Xvid did a good job trying to keep the text sharp at 1440p – but at 80% Quality, macroblocks are everywhere (those present in the screenshot above are not from the JPG compression, they were present in the game recording itself). At 80% Quality, anything with subtle gradient colour changes are absolutely tortured by the codec, seen especially in the change from light to dark in the Center Top light fixture area and the Left Lower curtain region. Bright areas however, such as the light fixtures themselves and almost all of the particles flying around, are judged by the codec to be ‘important to human eyes’ and detail is kept high for those objects.

Xvid(b)** at Bandicam’s Default setting of 80% Quality, Minecraft.
Click to see Full Size
The above frame is taken from a recording of the Minecraft Demo starting shoreline, originally captured at 1440p (the image is resized down to 1280×720). I was interested in how Xvid would handle Minecraft, a difficult game to capture and compress, as hard edges and lines are everywhere. Bandicam’s version of Xvid did surprisingly well, as the video recording itself is a joy to watch, with compression artifacts barely noticeable (recording at higher resolutions helps with that, but uses more disk space for the game recordings). Magnification of the original video frame is just below (next image):

These two sampled regions are magnified to 200% (doubled in size). They were extracted from the game recording frame above, which itself came from the original game recording produced by Bandicam and the built-in Xvid codec.
Click to see Full Size
While not as obvious in the moving video, the above frame extractions (both Left and Right sides) show Gibbs Effects [‘ringing’ or ‘mosquito noise’] around the hard edges of Minecraft’s graphics. The colour gradient changes, blending slowly into the background/sky colour in the Right Half of the above image also cause Ringing and Macroblocks to occur. Distant water gets treated with extreme prejudice by the codec, as the jumble of lines and animation from the textures are ‘sluffed together’ [my technical term] and Macroblocks are obvious. Again, these artifacts are more obvious in the stills from the game recording – the video itself, when watched, was more appealing to the eye and these compression artifacts aren’t as noticed as the frames fly by and the cow looks at you in a wondering manner.

Regardless of some of Xvid’s compression shortcomings illustrated above, with the speed that it performs at, along with the ability to turn up the Quality setting in Bandicam, these artifacts shown will not occur as often in higher quality settings – and then Xvid can be a nice codec to run with, especially if a system cannot handle a codec that does higher processing on the frames [taking more time to do calculations on them and saving them to a file, creating ‘lag’]. Older systems or laptops that do not have the hardware to utilize GPU-accelerated game recording (with codecs such as NVIDIA’s CUDA and NVENC, AMD’s App Acceleration and Intel’s Quick Sync) can utilize Xvid as a less-taxing codec to record with [as another option on the Utility Belt of Game Recording Codecs to choose from]. Indeed, it is almost as speed efficient as the ever-compatible MJPEG codec, for capturing, editing and compression.

The default setting, when installing Bandicam, creates a GOP of 150 [GOP stands for Group Of Pictures or the number of frames between Information/Key Frames in a video]. This is fine for normal viewing (and it leaves a lot of headroom for compressing ‘only the differences’ between the frames, resulting in smaller filesizes), but a large GOP can create problems with editing, as many NLE’s (Non-Linear Editors, such as Sony’s Vegas/MovieStudio line, Adobe’s Premiere products, Lightworks and more) do not work well with so many frames in-between the Keyframes – however, editors such as Corel’s VideoStudio, CyberLink’s PowerDirector and Microsoft’s own Movie Maker do not exhibit this issue [I tested these three applications by hand, myself, just to make sure and they imported fine and were handled without the “glitchy-ness” or “trails” that were exhibited in (for example) Vegas].

Although originally captured for an article on the Xvid codec here (which can potentially also experience the issue mentioned in the above paragraph) this image shows an example of what the “trails” or “glitchy-ness” will look like, as it was captured from a video with a Large GOP (large keyframe interval) output produced by Vegas. (Click to see Full Size)

When editing a video with a large GOP, the video editing application must ‘seek’ to the next Keyframe whenever it has to process a request and calculate/build all of the frames from there (which slows things down and delays processing and editing). Also, depending on the application, with some programs video can only be ‘cut’ on keyframes (unless an application is coded to create keyframes where needed). All of these steps and problems created by ‘Long-GOP’ video can be avoided [when using the above-mentioned video editing programs] by simply adjusting the Keyframe Interval in the Xvid settings to “1”.

One caveat to keep in mind, with setting a Keyframe Interval of “1”: although it will now make for speedy/easier/morecompatible editing with many video editing applications, the codec will not have as much ‘headroom’ to work with, when compressing your game recording material. 
What this means is, that instead of only keeping track of the changes between frames (say, a person running by down the side of the screen), where the codec will literally only save those ‘differences’ in the file; it now has to save every single portion of the viewable screen in every single frame, complete and independent in ‘stand-alone’ frames (the KeyFrames), and while the video will be much faster in seeking and have increased editing compatibility, the codec requires much more bitrate now, to save ‘everything’ in every single frame.
The result: your video file size will end up larger than before. However, you can now edit the video in Vegas, Premiere, Lightworks and more… the choice of how to go about this aspect then, is up to you [whether to use a GOP of 1 for easier editing, or not]. If you do not use these specific video editing programs (perhaps instead, you are using PowerDirector or VideoStudio Pro or Movie Maker, which to not have as much trouble with ‘Long-GOP’ material, not needing the GOP to be one frame) or you are not having problems with whatever editor you are currently using, there is no need to make this change to the Xvid recording settings in Bandicam [this is why there is no green indicator arrow in my ‘Suggested Settings’ illustration coming up in a little while, for this option]
Staying on the topic of Bitrate [from the above paragraph] for a moment, “..what kind of file sizes are we looking at..?”, you might ask. Well, here is a sampling of some of the Bitrates that were seen when recording with Xvid(b)** at Bandicam’s Default Settings for the codec:
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }
Recorded Game Title                    Resolution     BitRate (Mbps, GBph) 
Hitman: Absolution Benchmark 1366×768 ~ 34 Mbps, 0.97GB/hour
Hitman: Absolution Benchmark 2560×1440 ~ 83 Mbps, 2.4GB/hour
FurMark (Full Run) 1366×768 ~ 44 Mbps, 1.2GB/hour
FurMark (Full Run) 2560×1440 ~ 45 Mbps, 1.2GB/hour
Unigine Valley Benchmark 1366×768 ~ 37 Mbps, 1.06GB/hour
Unigine Valley Benchmark 2560×1440
Batman: Arkham City Benchmark 1366×768 ~ 20 Mbps, 0.57GB/hour
Batman: Arkham City Benchmark 2560×1440 ~ 54 Mbps, 1.5GB/hour
table code created by Danny Sanchez (journalistopia.com)
Just to compare some file sizes of other codecs: the Low Quality setting for the Dxtory codec (with Compression) recorded a run of the Unigine Valley Benchmark (at 1080p) at about 326Mbps (9.3GB/hour), while FRAPS produced a recording of about 291Mbps (8.3GB/hour), with Lagarith (in Default/RGB Mode) creating a recording of the same material that ran at about 235Mbps (6.7GB/hour). Of course, bitrates fluctuate, depending on the complexity of the material (more movement/action/etc, which requires more bitrate to properly represent the material.. but a longer explanation of that is outside the scope of this post [believe it or not…I’m trying to keep them ‘short’! hah]).
The other setting that can be changed in the Bandicam interface for their version of the Xvid codec, is the Quality. Here is an example of the differences in quality output at the various Quality settings for Bandicam’s Xvid:
Comparison between varying Quality settings, for Bandicam’s version of Xvid (from Left to Right; Quality at 40%, 60%, 80% and 100% Quality). The JPG compression used for this composite [the four videos side-by-side] did not overly affect the Macroblocking occurring – the ‘blockyness’ seen in these frames is almost untouched, even though the videos from the original Unigine Valley Benchmark recordings were converted into this JPEG image – this is very close to how it looked in the video (although slightly more noticeable as still images). Click to see Full Size
As you can see, the perceived quality for Xvid goes down quickly, with Macroblocks becoming more obvious as the quality setting goes down. However, acceptable Quality can be maintained if the quality setting is kept high [in my opinion, stay at 90% or higher if you can]. Remember though, that with the higher quality settings, more space will be required by the codec, to save all of that data. Also, if using a Keyframe Interval of “1” (creating a GOP size of one frame, each frame in the video then being a Keyframe), the codec will also not have as much room to compress the images/video and your output size will increase. As stated above though, the benefit of using a Keyframe Interval of “1” is, then your game recordings will be easily importable/editable in NLEs like Premiere, Vegas, Lightworks, etc – if you are are having troubles with those specific applications [if you are not, there is no need to limit the GOP to one frame, which is why there is no green arrow indicator in the below illustration]. Below, are my Suggested Settings then, for this codec in Bandicam, in one image:
The ‘Setting Of The Month’: Bandicam’s Version of Xvid, included with Bandicam (Suggested Settings):
Quality is at 90%, PCM (“Uncompressed”) Audio is selected [mainly for editing compatibility], a higher compression (“Smaller file Size” option) is chosen (and a Keyframe interval of “1” is suggested for compatibility with editing applications such as Vegas, Premiere, Lightworks, etc. if required [only change if needed as it increases file size, no green arrow indicator is shown on the Keyframe Interval])
Click to see Full Size

Overall, I think ‘Bandisoft’s version of Xvid’ in Bandicam does a decent job with Quality – and is downright excellent where Performance is concerned. On my system (and hopefully yours), Bandicam’s Xvid had very little drain on the performance of the game while recording with it, creating very little ‘lag’ while recording (it had a low ‘performance hit’). As long as the quality setting is kept high (90-100%), the recorded output Quality can be quite acceptable, with only a little Macroblocking (block shapes being visible) and Posterization [colour quantization, which is a reduction in the amount of colours, resulting in ‘colour banding’ or ‘bands’ seen] in the darker and ‘flatter’ areas of a frame in a game recording (Macroblocking may occur in areas such as skies, less-colourful regions, etc). Try out some recordings with Bandicam’s version of Xvid for yourself and see if you prefer using it for recording your gaming adventures.
Please note dear reader, that I am not saying “this codec is the best one to record with” or “use this one only”. I am merely showing that it is possible, or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you wish – use what you prefer. 



See you in the games!


Personal Short Version/Opinion:


While the Bandisoft-optimized version of Xvid included in Bandicam works pretty well and is fast, I find myself not using it very often, other than this past month or so, for testing. After recording for a while with Xvid’s ‘successor’, h.264/AVC, the extra features of Deblocking and other tools in AVC have ‘spoiled’ me. Going back to the slightly more ‘blocky’ output of Xvid – even though it creates very little lag when recording – is slightly distracting to my eyes. When I see an Xvid game capture of mine now, my eyes are instantly drawn to the darker/flatter areas of the scene and those little tiny block shapes…and I sigh at the slowly-aging Xvid codec, remembering its’ heyday’ of compressing my TV shows recorded on my ATi TV Wonder PCI card. The late 1990’s and the 2000’s were ‘Xvid’s Time’ to me, when I used it for almost everything – and while it performs well in game recording today (even Xvid.org’s ‘Official’ version, with the right settings), I am now just too used to the benefits of more modern codecs, like h.264/AVC, which can even use the videocard/hardware, for GPU-accelerated recording.

I realize there are a lot of people gaming on laptops out there, and not everyone has a dedicated/separate videocard inside their system to record with, but the more I use my GPU to record with, the more I am impressed with the performance when recording most games [note that some games ‘don’t like’ GPU-accelerated recording (are not fully coded for compatibility with it) and these games have large hits to performance with it]. At the moment of this writing, I have two NVIDIA videocards running in my system (performing together in SLI mode) and I am enjoying using the GPU-accelerated CUDA offering in Bandicam to record with. Like AMD’s AppAcceleration and INTEL’s QuickSync, CUDA utilizes H.264/AVC through the hardware to record, having high performance [for most games] and producing nice output, utilizing some of the newer aspects of MPEG-4 (such as Deblocking) when recording, to hide compression artifacts [the little ‘glitches’ from compressing the video]. The speed, and presence of light ‘compression correction’ from this hardware implementation of MPEG4 has spoiled me now, and I am finding it hard to go back to the slightly more obvious artifacting in ‘older’ codecs, such as MPEG-1 or Xvid (which is ‘older’ MPEG-4), especially when those codecs are used at lower quality settings, to try and save hard drive space. (Turning up the Quality settings for these codecs helps a lot, if your system can handle it)

As CPU architecture evolves and modern CPUs have ‘mini-GPUs’ built into them, the differentiation of capability between ‘gaming rigs’ and ‘gaming laptops’ blurs [as far as game recording goes], as GPU-accelerated game recording is possible now by less and less expensive hardware (AMD APUs) and processors (INTEL’s QuickSync), even within laptops [as opposed to full desktop systems]. This means that “gaming laptops” now have much more capability when it comes to game recording, today. If your laptop is capable of using GPU-accelerated recording, give it a try. If it is not, systems that do not use the GPU to compress their video can still perform well recording games, as is shown with the above article, by using Xvid. “If you can’t choose the H.264 encoder in Bandicam, choose ‘Xvid'” ~ Quote from the Bandicam.com website.

Do some testing of your own dear reader – and have fun experimenting, finding a codec that you will eventually prefer to record with – and See You In The Games…
Last Remarks (in addition/continuation to the Prologue of this article): 
Another thing to keep in mind is, that my settings (both for Recording and Editing/Rendering) change slightly over time… I may have been able to purchase a new disk drive recently for instance, so then I will allow my recordings to take up more space [for a while anyway]. I may be trying out a Demo/Trial of a new version of a Video Editing Application, so I have been experimenting with some different Rendering settings. Perhaps a videocard driver or codec was updated, so now I will experiment a bit with the recording application settings, seeing if I can squeeze a little more Quality out of my recordings, while keeping the Performance high. All of these reasons and a few more, are why my settings constantly change over time. Don’t worry, I’ll try to remember to come here and share them with you, anytime I find a “Good Combination” that works well for either High Quality or Fast Performance, the ‘Holy Grail’ of course being a Perfect balance of both. 
As I have begun more dedicated testing over the past few years, I have found that specific games themselves ‘prefer’ certain recording and rendering settings over others. What I mean by “prefer” is: as new game rendering engines are written, hardware architectures change, and programmers utilize ‘something over another’ in general during a game’s development, this affects what settings a game ‘works better with’, whether it is a specific game recording program, hardware/GPU, or specific recording and rendering settings; hence my usage of the word “prefer”. 
This is why, for example, some games will perform better on an AMD/ATi-based videocard in Benchmarks and Reviews than an NVIDIA-based GPU – and then other games will have better results on an NVIDIA-based videocard over an AMD/ATi-based GPU – those games were simply being developed [the programmers wrote the code] on a system with that certain GPU installed in it at the time. This also means there is a chance of specific optimizations in programming that slightly favour one brand of GPU over another [and they may even have been ‘compensated for their efforts’ by that respective company, but *shhh* these things aren’t spoken of outside Mordor]. 
In regards to the above and game recording, I have found that some games will have better performance with different game recording applications as well. For example, one game may have less of a performance hit while recording with Dxtory and then another game will have better performance recording with Bandicam [as an example] – it all depends on the code and how it is written and being rendered. That’s why I ‘change it up’ so often, altering my recording settings (and rendering settings) as each game I play exposes its nuances. That’s what I mean if I ever say a game ‘seems to prefer’ recording with one game recording program over another. 
Keep this all of the above in mind then and also remember dear reader, that I am never telling you “you should use this”, I am always suggesting only a possibility in my posts, and it is always up to you to try it out and decide if you want to use a recommendation of mine or not.
 [I encourage everyone to always take the good ideas from others and leave the bad, making up a composite of their own liking and preferences and what they want to utilize – whether it is with game recording and editing, or Life In General – but, that last part is for another blog…] 

 **[designated as “Xvid(b)”, to show that it is the “Bandicam-Optimized Version of Xvid”]

Men’s Body Click Diet part 4

Benign Prostatic Hypertrophy and Prostate Cancer

Benign prostatic hypertrophy is an enlargement of the prostate that’s called benign because it is not due to cancer cells. Still, the enlargement can be far from benign if it results in a lack of control over functions that we all take for granted, including urinating when you want to urinate and only then. A single urinary accident in front of your classmates in the first grade can constitute a major, unforgettable scar in one’s childhood; a repeat performance, like that of my sixty-year-old patient while standing in line at the check-in counter at O’Hare Airport, is no joke either. Nor is `benign’ the right word to describe the condition that underlies such loss of control. BPH may also involve getting up frequently at night to urinate, with the intense urgency to do so unfortunately combined with a disconcerting hesitancy of performance and a lack of reward in the volume of urine produced.

Although the symptoms of BPH can be severe, it is ironic that men with prostate cancer often have no symptoms. As they age, most men, on biopsy, show signs of prostate cancer. In fact, by the time they are in their eighties, nearly all men have prostate cancer, as defined by the typical cancerous appearance of cells under the microscope. Yet, because this particular cancer grows slowly and spreads infrequently, only a small percentage of men actually become sick or die from the disease. (A man’s lifetime risk of dying from prostate cancer is a little less than three per cent.)`’

Diet Start

Given the low odds of illness or death from prostate cancer, it’s confusing from a medical standpoint when a 60-, 70- or 80-year-old man has a prostate biopsy and is found to have cancer cells. Because the question of the actual malignancy of the condition — how likely it is that the cancer will grow quickly enough to cause problems — is difficult to resolve, it encourages a more aggressive approach to therapy than might otherwise be warranted. Since aggressive therapy frequently involves either removing testicles or taking female hormones, which can produce dramatic changes in a man’s body, this is not a trivial question.

Natural therapies for treating or, more important, preventing illness are not usually studied in the same way as pharmaceuticals, because no one can patent a naturally occurring substance like flaxseed powder and make enough money to justify the enormous expense of carefully conducted, controlled and double-blinded studies. Still, the studies show that consuming soy protein and other isoflavone and lignan-containing foods reduces the risk of prostate cancer. And the cancer data suggest strongly — and there is abundant anecdotal evidence to support it — that the same hormonal environment that leads to the high incidence of cancer in older men inour culture, but not in Chinese and Finnish men, is also associated with the risk for prostatic enlargement.5

The simple strategy for preventing the range and frequency of prostate problems is to consume more soy protein, flaxseed powder and rye fiber. If you happen to be a regular bacon, ham or sausage and eggs kind of guy, I urge you to substitute the shake, with its soy protein and flaxseed powder, at least four days a week. It’s good that you’re eating protein at your morning meal and getting the lift you need at the beginning of the day, but what you’re eating will not protect your health like soy protein and flaxseed. (If you don’t have time for breakfast, see the section for travelers in the appendix, where you’ll find a quick shortcut that will help you get your soy protein and flaxseed every day.

The Body Clock Diet and Heart Disease: It’s not Just the Cholesterol

Coronary heart disease (CHD) is the number one killer of both men and women in the United States. Each year, more than five hundred thousand Americans die of heart attacks caused by CHD. Soy intake has been shown to lower cholesterol and decrease cardiovascular disease associated with high cholesterol. There is growing scientific evidence to support this; for example, one recent study showed that a diet high in soy protein reduced cholesterol by as much as 20 per cent. 6 Other research has demonstrated that soy protein lowers triglycerides and reduces the oxidation of LDL or ‘bad’ cholesterol, which contributes to blood vessel problems linked to cardiovascular disease? And flaxseed has also been shown to lower both total and LDL cholestero1. The Body Clock Diet, which includes daily intake of soy protein and flaxseed powder, ensures that you get this important protection.

But cholesterol is not the exclusive evil agent in heart disease. Some people, especially those with complicating conditions of diabetes, tobacco smoking and a strong family history of heart disease and obesity, carry cholesterol-related risks. But most people who have heart attacks and other complications of ‘hardening of the arteries’ have fairly normal cholesterol levels.

The tide of medical thinking is changing when it comes to heart disease. It looks as if issues related to carbohydrate excess, insulin resistance and homocysteine and its control by folic acid will take center stage away from cholesterol. 9 The benefits of substances like flaxseed and soy are not due solely to lowering cholesterol. Soy and flaxseed do indeed lower serum cholesterol, but they also modify carbohydrate and fat metabolism, further decreasing your cardiovascular risk. You don’t have to be takingaim at your cholesterol to get benefits from soy, flaxseed and the Body Clock Diet.

Like many men, you may have a tendency not to think about your health, shrugging off warnings from your mother, spouse, doctor and children as well as newspapers and television programs that try to scare or educate you about activities that are dangerous to your well-being. Nor do you want to listen to me when I say that failure to adhere to basic circadian principles may eventually show up as something noticeably wrong with your health. But my advice is simple: there are some painless things you can do to reap what are potentially major rewards for your long-term health.

Deals And Sales – ‘Things Goin’ On This Weekend’ (Weekend of August 11th, 2017) [Notification]

Just a quick Notification of some things going on… Once in a while, I try to post about Sales going on somewhere – especially the ‘big’ ones, like Summer’s End or Christmas Sales. This weekend, there are a few ‘Free Weekends’ and Sales going on (that I saw so far) and thought I wanted to share them, just in case there were others interested in these games, heh. Here’s what I saw is Goin’ On This Weekend:


Guild Wars 2 Expansion (Path Of Fire) is Free To Try all weekend:

https://www.guildwars2.com/en/news/get-ready-for-the-guild-wars-2-path-of-fire-preview-weekend/

GOG.com (formerly Good Old Games) is having a couple of Sales on games which include series like Master Of Orion, Warhammer 40K, Painkiller, Delta Force, Red Faction and at the same time having a sale on Strategy Games like Codename Panzers, Men of War, Hybrid Wars, Total Annihilation, Empire Earth, and more:

https://www.gog.com/promo/20170807_weekly_sale
and
https://www.gog.com/promo/20170811_special_promo_strategy_sale

Some other games, which are Free To Try all weekend via Steam, are:

For Honor, the medieval swordplay/battle game is Free To Try all weekend and selling for half-price
(for those that remember Die By The Sword, it looks like it may be similar to that, but in an ‘arena’ setting [sorry, but I haven’t been able to try it yet]):

http://store.steampowered.com/app/304390/FOR_HONOR/

Saints Row IV, from the crazy “each game is increasingly like GTA-on-drugs” open-world/action
series, is Free To Try all weekend and selling at a reduced price
[I haven’t tried it yet, but I am still playing the wacky Saints Row III once in a while and still getting a kick out of it]:

http://store.steampowered.com/app/206420/Saints_Row_IV/

Sorry I didn’t get to finishing this sooner, but the weekend isn’t over yet! Get out there and try these games out or grab something you want on sale – and maybe See You In The Game!

Edit:

I completely forgot one more I was going to post in here! 

GamersGate also has some games on Sale right now, including Borderlands (for five bucks!), the Mafia series, Bioshock series, Xcom series, and more:

https://www.gamersgate.com/offers

[Note: I am not affiliated with these game sites, nor do I receive any compensation for mentioning them here (the Links do not have any ‘affiliate tags’ or similar additions to them) – I am merely an enthusiastic gamer and like to share deals and other goings-on with other gamers like me. Enjoy!]

WORKOUT ANYTIME in Buffalo Grove Patch

WORKOUT ANYTIME in Buffalo Grove Patch in an article titled, “24/7 Gym Opens in Buffalo Grove.”  The article opens with some details about the opening of the Buffalo Grove WORKOUT ANYTIME, and the plans to open up to 25 clubs in the Chicago suburbs. Jeff and co-owner Eric Nagel are quoted about why Buffalo Grove is a great place for the first WORKOUT ANYTIME in Illinois. Cristel gives details about what WORKOUT ANYTIME offers and about the upcoming grand opening, and then provides info and quotes from Steve and John.  Click here for the entire article or begin below.

24/7 Gym Opens in Buffalo Grove
By: Cristel Mohrman

Workout Anytime might be a new name in town, but it’s one that company officials expect will soon be widely recognized.

The fitness center officially opened Saturday at 700 S. Buffalo Grove Grove Road. It’s the company’s first location in Illinois, but it certainly won’t be the last, said Workout Anytime officials, who are planning to expand to 25 clubs in the Chicago suburbs.

Buffalo Grove was selected as its first Illinois site for its demographics and because officials found little competition for the concept, which offers members all-hours access to no-frills workouts.

“We really like this location a lot,” co-owner Eric Nagel said.

(Read More)

Sample Dining Room Minimalist Design Idea

Sample Dining Room Minimalist DesignSample Dining Room Minimalist Design

Sample Dining Room Elegant DesignSample Dining Room Elegant Design

Sample Dining Room Classic DesignSample Dining Room Classic Design

Sample Dining Room DesignSample Dining Room Design
Sample Dining Room Elegant DesignSample Dining Room Elegant Design

CONCEPT INTERIOR DECORATORS NYC

Interior Decorators NYC

Interior Decorators NYC, there are many different benefits to live. Here, culture, food corners, training, and last but not least, the lounge and bar. If you want to spend a night in the city that never sleeps, then to New York City is a great bar, club and lounge, in particular to go. There are several rooms, and also spread throughout the city. live musicians are the best features of these lounges and bars. You can find indie rock band a lot of volume, and other local bands. Part of the show in New York City, a tremendously well. They are tastefully decorated, and the crowd, which is very appealing. These amazing living space in this late night to win the House, hip hop and youre likely to find one that will fit your musical taste.

They offer large crowds and expensive liquor and very elegant. The interior decoration of these rooms are for lights, big boost mood of the series, in fact, people also benefit from seeing the crowd warm with loud music and too much light. Interior Decorators NYC always find some very funny and what’s better than a bar, club lounges and especially where you can make your night of fun. Once your stomach is full with the best drinks in the theaters of New York, then is time to rock and roll music and if so, what better than a living room and also in New York, where fun begins.

In addition, these shows are also very useful during the time of the wedding reception. People are now tired of planning parties in hotels and other places. now part of wedding reception is poured into large halls, where people enjoy the maximum level. New York reception halls are simply incomplete without drinks. Here you can plan a cocktail, and also a bachelor party incurred prior to marriage. You can enjoy unlimited drinks which is great taste and you can also enjoy the loud music here. This part of reception or a cocktail can be fun with friends and other relatives. You know some reception includes dancing and fun, and this is the basic ingredient and that is what makes a great party for everyone. It is therefore the reception of the show is so famous in Interior Decorators NYC.

Interior Decorators NYC
Interior Decorators NYC

5 Ways to Use iPads in Math

Today I’m linking up with the Tune into Technology Linky to share some ways to integrate technology in Math. Since I teach in a 1:1 iPad fourth grade classroom, I’ll focus on how we use iPads in Math.

1. Build a Math Notebook in Evernote



Evernote is my all-time favorite note-taking app, and that extends to math as well. In addition to typing text notes, students can attach documents (handouts, activities, etc) that they’ve viewed on their iPads and they can also take pictures through the app or attach pictures from the camera roll. That’s helpful when they build models with manipulatives and want to archive their work.

2. Reinforce concepts or conduct inquiry research with math movies.

BrainPop
Khan Academy



Two of my favorite apps to use in math are BrainPop and Khan Academy. I often use these to introduce a lesson or to differentiate instruction. I often feel like I get stretched pretty thin during math instruction because I have such a range of skills in my classroom, but these apps help. If I’m working with a student and a second student needs help, I can direct that student to a video on Khan Academy and encourage the student to see if that will help him or her figure out the problem until I can get there. Often the additional examples help the student understand the problem better.

3. Make math movies to assess understanding

Show Me

Explain Everything

I often ask students to show their solution to a problem on an app like Show Me or Explain Everything. There they can model their thinking using pictures or drawings, and they can record their voice as they explain their work. I learn so much about their understandings through their explanations, and it helps to assess the Standards for Mathematical Practice included in the Common Core.

4. Make a Vocabulary Notebook in Keynote

Keynote


I like to use Keynote for their math vocabulary because we can create slides that use the Frayer Model for vocabulary instruction. In addition to typing definitions, examples, and non-examples, they can draw their own pictures on a whiteboard app, take a screenshot, and add them to the slide. They can also search for real-world examples to photograph and add. Once they’re finished, they can easily alphabetize their entries by rearranging the slides.

5. Use QR codes
Our math word wall has QR codes linking to the definitions of each term so students can quiz themselves about the meaning of a term or review terms they’ve forgotten. If you click on the image below, you can get a freebie example of this for the properties of multiplication.

My complete sets for grade 4, grade 5, and 4/5 combo are available at my TpT store.

We’ve also written riddles in Geometry where students could scan a QR code to find the answer. You can read my post about that here.

And we’ve used QR codes to help check homework assignments. I’ve written about that here.

I’m really just scratching the surface here — there are so many other possibilities and several math specific apps to use, but I’ll save those for future posts. I’m excited to read other examples of integrating technology into math, though, and if you haven’t visited the linky yet, you definitely should. I got so many great ideas for reading and writing from it last week!

How do you use technology in Math?

How to Deal with Yourr Seasonal Allergies

S
Seasonal allergies to pollen and mold seem to getting more and more prevalent each year with progressively more severe symptoms in sufferers.    Treating allergies with nutrition and nutrition supplements can have big advantages over using medications.   
Allergy medication most commonly comes in the form of Antihistamines, and there are some big problems with long-term use of these medications.     It is now known that prolonged use of antihistamines decreases levels of acetylcholine which is a key neurotransmitter involved in memory and other important functions.   In fact, antihistamine use increases the risk of senility, dementia and Alzheimer’s Disease.
What are Allergies Anyway?
Allergies are abnormal immune reactions to specific agents (proteins) known as antigens/allergens, which include many substances such as foods, drugs, pollens, dust mites, animal danders, feathers, along with many others. 
Allergies may also develop when an otherwise innocent substance has significant contact with an already inflamed surface (known as sensitization).  For example, when sick with a respiratory illness, respiratory surfaces are already inflamed and substances present at this time may be “remembered” as being foreign.  This can also occur with chemical substances known as “haptons” which are combinations of self and non-self which can lead the immune system to attack the self. 
Since there are multiple pro-inflammatory substances involved with allergies it is rare to obtain adequate control with single products/medications.  The most potent chemical mediators in allergies and asthma are leukotrienes.  Some leukotrines are one thousand times more potent than histamine as stimulators of bronchial constriction and allergy. 
Interestingly, many medications that reduce one inflammatory pathway actually boost leukotrienes.    For example, Aspirin and other NSAIDs (Non-Steroidal Anti-Inflammatory Drugs like Ibuprofen) result in the production of excessive levels of leukotrines in sensitive individuals although they decrease prostaglandins associated with inflammation and thereby relive pain.  So long term they can create a much more severe problem.
Asthma is linked to allergies and can be a severe and life threatening condition.   Do NOT try to self-treat Asthma – see a physician!
Strategies for Allergies
Try to avoid allergens by using air filters, regularly cleaning all surfaces and vacuuming and keeping your air-conditioning system on while regularly changing filters to filter out as many allergens as possible.   Remember your car cabin filter as well, and take showers and wash clothes after being outside for long periods of time.
Change your diet to reduce inflammation.    Dramatically reduce your intake of refined carbohydrate – sugar and starch which drive insulin which drives inflammation.  At the same time increase your intake of low glycemic, organic fruits and vegetables such as berries, broccoli, Brussel Sprouts, etc.   These plant foods contain polyphenols which are potent anti-oxidants and help to reduce inflammation and allergies without side effects.
Increase your intake of Omega 3 Fatty Acids from cold water fish such as Alaskan Wild Salmon and/or take an Omega 3 Supplement such as Krill Oil.    Omega 3 fatty acids will always reduce inflammation if taken in sufficient dosages so this should be a primary strategy for allergy sufferers because they produce many side benefits.   The only exception is people taking any type of medication to thin blood and reduce clotting like Coumadin.   In this case the combination can be dangerous!
Nutritional Supplements for Allergies
There are several highly effective nutrition supplements for allergies including some key herbs.
Local Raw Honey – it MUST be local and must be raw because it will contain small amounts of local pollen and works by getting the body used to pollen much like an allergy shot.     A Tablespoon a day is as much as you need.   Many people swear by this simple and safe remedy!
Stinging Nettle Extract – this herb has a long history of effective use for allergies and freeze dried preparations seem to work the best and are best taken BEFORE allergy season even begins to put a damper on symptoms before they start – this is true of all nutritional approaches to allergy by the way!
Euphrasia Officianalis – aka “Eyebright” is an herb which name says it all – it is highly effective for eye allergy symptoms.
Quercetin – is a flavonoid contained in high amounts in apples, peppers, red wine, dark cherries and berries, tomatoes, cruciferous vegetables such as broccoli, cabbage and sprouts, and raw red onions.   To treat allergies taking supplemental quercetin is the way to go, and a good quercetin supplement is a product called “AllQlear” by Integrative Therapeutics and can be purchased on Amazon.     It also contains “ovomucoids” from quail eggs that act as tryptase inhibitor and prevent release of histamine.    Another excellent Quercetin Supplement is “Qforce” – http://www.qforce.com/ Quercetin is proven to decrease yur chance of contracting a viral illness like the cold or flu by 9 times!
Boswellia Extract – Boswellia aka Frankincense (yes the herb mentioned in the bible!) can be highly effective for allergies and other forms of inflammation including arthritis because it blocks the formation of leukotrienes!    To get the benefits you must take 5-loxin which is a specific extract.   Note that in some individuals 5-loxin can cause or excacerbate heart burn so it is not for everyone, but when it works it can be highly effective!
Butterbur Extract – this plant extract can be highly effective for inhibiting leukotrienes and allergy symptoms or side effects.   You need to take a standardized extract with standardized levels of Petasin and Isopetasin) and free of Pyrrolizidine Alkaloids aka PA.  High quality brands include Life Extension, Swanson, and Enzymatic Therapy to name a few.   This product can also help many migraine sufferers and is a well-researched, proven treatment.
NAC – N-Acetyl Cysteine – helps thin mucus naturally and boost levels of the body’s most important antioxidant Glutathione – every allergy sufferer should be taking 600 – 1,200mg per day!
You will also find combination of these ingredients in particular products, and it is worth experimenting a bit because if you find the right product or combination of natural products you can find relief without sedation and without the side effects associated with antihistamines and more potent drugs like steroid nasal sprays or oral steroids.

Guided Math Resources

I recently went to a workshop about guided math groups, and I have tons of new ideas that I’ll be sharing in the coming weeks. I couldn’t wait, however, to share a couple of the resources that I’m really excited about.

First, is this book:

Good Questions: Great Ways to Differentiate Mathematics Instruction, Second Edition  is a resource that I was able to start using with my students as soon as I got it. It is full of open-ended questions and parallel tasks that students at any level could access. It’s organized both by grade levels (K-2, 3-5, 6-8) and domain strands (Number and Operations, Geometry, Measurement, Algebra, and Data Analysis and Probability). It also lists which Common Core State Standards each question aligns to.

We were working on line plots (4.MD.4) when the book first arrived. Consider these problems:

You create a line plot that is based on measuring items to the nearest quarter of an inch. You notice that your plot looks a lot like a steep mountain. What might the measurements be and what might you be measuring? Why does it make sense that your plot would look like a steep mountain? (p. 174)

We had a great class discussion about inferences we can make about data based on the shape of a line plot, and students were really creative about what the line plot could be measuring.

There was also a parallel task where students could choose how to represent the data.

The set of data below describes the ages of a group of people at a family party.

32, 30, 5, 2, 1, 62, 58, 28, 26, 25, 24, 2, 4, 39, 16. 

Choice 1: Create a line plot to display the data. 

Choice 2: Create a bar graph to display the data. (p. 186)

Some students felt more comfortable with bar graphs, but they realized that it was harder to figure out intervals and scales for the bar graph vs. a line plot. That yielded a great discussion about how to choose which type of graph to use.

This is a great resource to use for student math journals, and it’s one that I will be going to daily. I can’t recommend this resource enough.

Another math resource that I’m falling in love with for my math workshop and guided math groups comes from the Bridges in Mathematics program. Until attending the workshop, I’d never even heard of this program, but it seems like it’s well-suited for developing math centers and guided math groups. There are some sample tasks available as a free supplement to the the program (to align it with Common Core) at http://catalog.mathlearningcenter.org/free. I’m also planning to purchase their Building Computational Fluency program for $45. I need something more structured and organized for checking students’ multiplication and division fluency in the fall.

Do any of you use the Bridges in Mathematics program in your school? If so, I’d love to hear more about it — I’m really intrigued!

Have a great weekend!

Franchisee Profile: Marc Flame

Franchisee Profile: Marc Flame

Marc Flame is originally from the Bronx in New York, specifically Riverdale. Growing up, Marc spent every summer on Long Island at his grandmother’s beach house and loves the outdoors. After graduating from JFK Highschool, Marc’s parents moved to South America where Marc learned to speak basic Portuguese. After living in Brazil for a while, Marc moved back to New York where he attended New York University. He graduated in 1981 with a degree in Economics and International Business. Upon graduation, Marc spent much of his time on Wall Street starting his career Bankers Trust Company. Marc eventually became Chief Financial Officer at the banks Technology subsidiary. During Marcs’ tenure he established a successful record of improving operational efficiency and profitability. After fourteen years at BTCo, Marc left and joined Citigroup. Marc spent ten years within the Finance Organization of Citigroup. He then joined the CBS Corporation where he served as CFO of the CBS Technology organization.

After doing some traveling, Marc decided to relocate from Chicago to Atlanta where he began researching franchises to invest in. After much research Marc decided that Workout Anytime was where he wanted to be. Not even three weeks after watching the Workout Anytime franchise video, Marc signed for his first franchise. He now owns the first Workout Anytime located on the South side of Atlanta.
How did you learn about the brand? 
I was researching different franchises and was heavily focused on the fast-food industry when I came across Workout Anytime. I watched the franchise video and was immediately hooked. I knew right then that was what I wanted to invest in. Not even three weeks after seeing the video I met with Randy the entire senior WOAT team. It felt like a family and I signed with Workout Anytime after that meeting.
Why did you choose an opportunity with Workout Anytime? 
I’ve always wanted to own my own business. I worked at a Baskin Robbins in high school and it was some of the best times I’ve ever had. I have always enjoyed doing my own thing which is why I started looking into franchises. I chose Workout Anytime because I am very interested in the Workout Anytime model and I really wanted to do a franchise in a market that really needed it. 
Do you have any development/extension plans? Add units? Timeframe? 
I would like to eventually expand. I do not have a multi-unit sign at the moment, but the goal is to have 3-4 locations within 4-5 years. I am trying to open one every year and a half. Currently, I am working to be the most successful location rather than building out more units. When you talk about franchises people have glass ceiling expectations with what you can achieve with any one location. The Workout Anytime model allows me to push the boundaries, and ensure the opportunity for many members to enjoy all the advantages provided to Workout Anytime members.
Are you involved in any charities or involved in the community in any way? 
I am learning more about the Riverdale area each day and would love to work with charities and get involved with the community once I get to know it better.
Do you have any other interesting hobbies or passions?
I love spending time outdoors. Anything outdoors such as going to the horse stables with my daughter, 
watch my son dirt bike on the trails, and go to the beach as often as possible.

The Incredible Pistol Squat

The pistol squat requires mobility and strength from the entire lower body and core, and once you work up to being able to complete them you can get a great lower body workout anywhere with no equipment. 
Most people will not be able to perform the pistol squat properly without working through several progressions that help develop the specific mobility, strength and stability required to get through the exercise for repetitions.
Pistol Squat Progressions
There are two basic ways to progress to a full pistol squat. Either use a progressively lower bench or step, or use something to hold onto while doing a full pistol to help pull yourself up and progressively use it less and less until it is no longer required.
For the step progression, you can use actually stairs or use a chair to start.    Stand facing away from the chair or staircase and put all your weight on one leg keeping the other leg straight with the hip flexed slightly so the non-standing foot is held off the ground in front of you.     Flex the hips and reach back with your butt towards the staircase or chair and lower yourself down under control keep your arms straight and in front of you parallel to the floor to counterbalance your hips moving backwards.    Let the standing knee and ankle flex along with your hip as you reach your butt backwards and go down.    However, you MUST keep the heel of the standing leg down and this requires a lot of flexibility of the soleus tendon (soleus is the single joint calf muscle).    
Try to lightly touch your butt down to a stair or the chair then drive the standing foot down, squeeze the glute extending your hip, knee and ankle to the starting position.  Perform sets of 5 – 10 reps each leg.    Overtime find progressively lower steps, benches or individual stairs so that you are progressively squatting lower and lower until you can perform a full squat on one leg all the way down to the ground and back up again keeping your non-standing leg straight and parallel to the floor while the hip is flexed.
The second option to progress to full pistol squats is to hold onto something that you can pull on while doing a full pistol squat thereby assisting the stance leg.    You can hold onto a suspension trainer, a cable machine handle, door frame, chair or table, or resistance training band or rope anchored above you.    A great way to do this is to anchor a suspension trainer or resistance band above you to a secure point then grasp the two handles and pull on them as required to do a full pistol squat.    Over time progressively use less and less assistance from the upper body, switch to just one hand, then lessen grip and assistance until you can perform full pistol squats.

Videos:  https://youtu.be/It3yvU0fomI or https://www.youtube.com/watch?v=PPksQCbeVZw

ROOM SEVEN LEVITATION HOTEL PARIS DESIGN

SEVEN LEVITATION HOTEL PARIS

The Last weekend we were invited to spend a night in the bedroom of SEVEN LEVITATION Hotel Paris … A change of scenery, enchanting, and very pleasant … We’ve tested since the beginning of dozens of hotels – from very luxurious to the simple – but SEVEN Hotel remains one of our fondest memories in terms of wellbeing! We literally left “floating”in this room LEVITATION, amid clouds … Here, the amenities of modern life are available starting with a Nespresso coffee machine with tea and coffee and an iPod docking station to listen to your favorite music in this extraordinary place. You will also find a flat screen TV with 4 channels olfactory delight your senses!

The room of the hotel LEVITATION SEVEN is also a premium bedding, large shower – where you can shower couple – air conditioning, a desk … So comfortable!

Above a photo of the room SUSPENDED BATH offering a superb tub suspended, and below a small photo of the ABSOLUTE LEVITATION!

SEVEN LEVITATION HOTEL PARIS

SEVEN LEVITATION HOTEL PARIS

SEVEN LEVITATION HOTEL PARIS

Marathon Training Tips

As the saying goes “those who fail to plan – plan to fail.”   This is true in business and it is also true in preparing for rigorous athletic events like running a marathon.     Successful completion of a marathon is all about creating a plan based upon the goal of completing a marathon on a specific date in a specific location.
Determining Starting Point

The length of your plan will depend on your current fitness level relative to running.  So the first step is determining your current fitness level which can be done in several different ways:
If you are currently running you can get an idea of your current fitness level based on how often you run, how far you run, and your average pace when running.
If you are not currently running, then do a 12 minute run test – see here for a how to guide to perform this simple test:  https://www.brianmac.co.uk/gentest.htm
Once you know your starting point you can determine how long it will take you to prepare adequately to complete a marathon. The key is slow and steady progression of average distance per run and total weekly training miles – go too fast and you WILL get hurt!    The body needs time to adapt to the stresses of running.    A good rule of thumb is to increase your weekly mileage (and mileage per run) by no more than 10% per week.
So if you are currently running 15 miles per week you would only increase total mileage to 16.5 miles per week and if your long run was 5 miles you would increase it by half a mile.
In order to successfully complete a marathon, you need to be running somewhere between 30 and 50 miles per week with individual runs of 16 – 23 miles.  The advantage of gradually building up to a 20 – 23-mile run is that you have mental experience with running over 20 which can be very challenging the first time you do it.   That being said, placing too much emphasis on distance can result in over-training if not done carefully.
Training Mix

Assuming you have a base of running 15 or more miles per week on a consistent basis you should begin to mix up your training by including shorter, harder runs with longer slow runs and at least one interval training session per week.      
It is critical that you have a training base of steady mileage prior to increasing training intensity and beginning interval training where you will perform higher intensity intervals of quarter mile to half mile mixed with recovery periods.   
There is an entire science behind interval training and the best athletes train with a heart rate monitor all the time to precisely determine the intensity of their work intervals and how long they recover during rest intervals of slow running/jogging or walking.     This is one of the many reasons that, in an ideal world, you work with a running coach/trainer who has experience designing and working with runners to prepare for marathons and other runs.   A good coach will help plan and adjust your training based on how you progress from week to week which is essential for the best results!

Strength and Mobility Training

Running requires a lot more than just cardiovascular and muscular endurance – it requires specific strength and mobility to avoid injury and allow for optimum running technique.  Integrating a run specific strength and mobility program into your training can be a game changer and the program should include:
            A specific dynamic warm-up and foam rolling for areas of tightness and pain
Dynamic Warm-up:  http://www.active.com/running/articles/before-you-run-the-dynamic-warm-up
Foam Rolling:  http://www.runnersworld.com/foam-roller/how-to-use-a-foam-roller
Cool-down with run specific stretches – http://www.runnersworld.com/injury-prevention-recovery/5-post-race-standing-stretches-every-runner-should-do/slide/1
Strength Training Exercises for Running
It is essential to have great core and glute strength to properly stabilize the body during the impact of running to prevent injury.
It is also critical to strengthen all the muscles of the lower body including the hamstrings, calves, and intrinsic muscles of the feet.
Sample Strength Training Program for Runners:  http://www.runnersworld.com/strength-training/10-essential-strength-exercises-for-runners/slide/2
Putting it all together

If preparing for a marathon seems like a lot of work and complicated that is because IT IS!    Like running successful business assessing your starting point and setting a realistic goal with a specific plan of action is key.     Also having a coach is HIGHLY recommended to not only help you create a realistic plan and schedule but to monitor your progress and adjust your workouts and plan accordingly.  

Workout Anytime on WBIR-Knoxville Afternoon Show

WORKOUT ANYTIME on WBIR-Knoxville Afternoon Show. Every Thursday WBIR has a healthy living segment that is sponsored by the Governor and April Nitzsche was the guest for this week on their show. April spoke about how viewers can be healthy throughout the day when they have a few minutes to spare to stay in shape in 2014. April talked about how to live healthy, and offer tips to viewers.  You also can view the video here.

Low-carb lifestyle guidelines

By now you should have a pretty clear idea of what you have to do to improve your diet and, with it, your entire lifestyle.

The general principles

Cut out all unhealthy refined carbohydrates.

  • Curb your intake of high GI carbohydrates and focus on those from the low—medium GI range.
  • Eat most of your fruit and vegetables raw to ensure a good level of phytonutrients and fibre.
  • Eat more high-quality protein — organic if at all possible.
  • Increase your intake of healthy omega-3 fatty acids by eating more oily fish, and use only natural unrefined oils in your cooking.
  • Cut out tea, coffee, concentrated fruit juices and alcohol, and banish soft drinks of any kind, but drink at least eight glasses of water per day.
  • Incorporate 30-45 minutes of aerobic exercise at least three times in to your weekly routine, and carry out resistance training at least three times per week.

Diet Start

DIETARY MYTHS

Myth: skipping meals is a good way to lose weight.

Fact: your body needs a regular supply of nutrients each day in order to work properly. If you skip meals, you will be more likely to make up for it by snacking or eating more at the next meal. Studies show that people who skip breakfast tend to be heavier than those who eat a nutritious breakfast. A healthier way to lose weight is to eat many small meals throughout the day.

Myth: eating after 8 pm causes weight gain

Fact: it doesn’t matter at what time of day you eat; if you are eating too much of the wrong type of food and not getting any exercise, that will make you fat.

Are you all fired up?

You should be, because you are going to get back in control. You now know what you are doing, understand your body and should look on this as an important project that will bring untold benefits. Now that you understand how your body metabolizes the food that you eat, you can start to view food as a vital fuel that helps your body function at optimum levels. This should be a turning point. It should change your attitude from one of ‘Oh no, I’m on a diet’ to a more positive ‘I’m doing this for me, to make myself healthier, fitter, stronger, leaner’.

Pretty soon you are going to be feeling and looking better. Think of that boost of self-confidence that you are going to experience. So get ready to roll and flex that determination. Whether you have 3kg (71b) to lose or 30kg (701b), this regime is only going to work if you are committed to changing your eating and exercise habits for life.

The rest of this section offers advice on weight, and on setting goals for (and managing) weight loss; suggests how to cope with the cravings and snack attacks that may arise when you are on a diet; and gives tips on taking supplements and sticking to a healthy diet, even when you lead a busy lifestyle. It is followed by the three-step programme and nutritious recipes that form theMainstay. Plus, there is also a section on adapting the plans to suit a vegetarian diet, which includes some delicious low-carb vegetarian recipes.

DIETARY MYTH

Myth: low-fat or non-fat means no calories. Fact: many low-fat and non-fat foods still contain a lot of calories. Often these foods also contain extra sugar, flour or starch thickeners to make them taste better. These ingredients all represent extra carbohydrates. As we have seen, you need to eat healthy fats to lose extra fat.

Trip to Hyderabad Cont……

Today I am leaving to Hyderabad for the assignment. Funny, there seems to be a lot of things that we do when doing an overseas consulting assignment but don’t really talk about it. The stuff we do for preparation has two parts

Things considered as part of consulting process
Marketing, prospecting and selling
Proposal, budget & contract
Invoicing and receiving advance payment
Preparation / Intake

Things that are part of the consulting process but gets taken for granted
Requesting Invitation Letter to process visa
Applying for visa
Travel & Medical Insurance
Foreign Exchange
Transport to and from Airport – in your country and the country you are visiting
Travel advice regarding security, weather etc

I addition it is up to the consultant to find out about interesting things in the city s/he visits. In my experience some assignments will give you a bit of time in the evenings and it can be boring to be stuck in a hotel all the time. Suggest the web or lonely planet for this.

Also rule of thumb is exchange a bit of money at the airport itself. Trust me you will spend more time and money in trying to look for better exchange rates.

My Trip to Batticaloa

This assignment required me to travel to Batticaloa which is in the eastern coast of Sri Lanka. The drive to Batticaloa is long (About 320 KM) but the killer is that it takes nearly 8 hours to get there. I left at 6.15 AM from Colombo and arrived at 2.15 PM in Batticaloa; stopping only for Breakfast and a cup of tea.

The assignment was 10 day evaluation of the management capacity of an organization who was delivering services to the people of the eastern province. The unique aspect of this assignment was that the client wanted to evaluate very specific aspects of its organization management structure, financial management, HR management, monitoring and communication systems. Therefore I had to customize the tools we used to a very high degree to ensure that the tools we used were compatible with the specific need. It also meant that this level of customization was a green field (Not done before so don’t know the pitfalls) this was further complicated by the fact that the execution of the assignment had to have a tri-linguistic person to facilitate the field work as well as translate at the synthesis workshop.

The assignment went in a smooth manner and it was well received by the employees of the organization. Generally management capacity evaluations can get tricky as some managers take it as a personal weakness and get very defensive.

I was surprised at the weather in Batticaloa and the amount of water on the ground. The roads that went through the lagoon were nearly inundated. Some of the shorter routs to Batticaloa were flooded so I had to travel via Polonnaruwa. In terms of the post war development in the east; I must say that all the reports regarding infrastructure development are correct and perhaps under reported. Road, bridge and utility projects are still going on and the whole of the eastern province looks like one giant construction site.

The fishing industry is booming in Batticaloa and the seafood prices are less than half of what it is in Colombo. So the team had seafood at every opportunity. The tourism industry has a demand but the number of rooms available seemed to be inadequate for the demand. There is a dire need for quality hotel rooms in Batticaloa. The availability of jobs would be the main social issue in the coming months as the construction industry starts to finish the construction projects.

I have to travel to Wadduwa (from Batticaloa) to attend the 6th South Asian Regional Workshop on Resource Mobilization which starts today; so will be on the road for the rest of the day.

The 1 Minute Workout

The number one challenge people to give to not working out is time.   So the question fitness professionals should be focused on is what is the LEAST amount of time for working out and still producing the benefits and results that people want and need.
The great news is that there is a lot of well done research on this subject, and there is a proven workout protocol that produces results with as little as one minute of total work time in a workout and a total workout duration of under 10 minutes including warm-up and cool-down.
The definitive work on this subject was written by Martin Gibala and is appropriately called “The One Minute Workout”.     In this excellent book he reviews all the related research and results on High Intensity Interval Training including an excellent review on the psychology of exercise as it relates to how people feel before, during and after different types of exercise protocols.     Long story short people really like certain HIIT protocols – even high deconditioned people and high-risk heart disease patients.
He and his team of researchers proved the effectiveness of the 1-minute workout to produce results and also found the specific physiological mechanisms responsible for the benefits of this protocol.
1 Minute Workout Protocol

Warm-up for 3 minutes at an easy pace on any piece of cardiovascular exercise equipment, walking, 
running, jogging or cycling depending on your preference and fitness level.
Do a 20 second sprint at your best possible pace (this is all relative to your fitness level)
Do active recovery at a light pace for 2 minutes
Perform another 20 second sprint at your best possible pace.
Do active recovery at a light pace for 2 minutes
Perform a third and final 20 second sprint at your best possible pace.
Cool-down for 2 minutes.
Total workout time – 10 minutes!
Frequency

Best results are obtained by repeating this workout 3 times per week BUT even once a week will provide benefits and help maintain a decent level of physical conditioning – the key is intensity NOT duration or frequency.

Recommended Reading:    The One Minute Workout by Martin Gibala:  https://www.amazon.com/One-Minute-Workout-Science-Smarter-Shorter-ebook/dp/B01IOHQ7RA/ref=sr_1_1_twi_kin_2?s=books&ie=UTF8&qid=1517152066&sr=1-1&keywords=the+one+minute+workout+by+gibalaAvailable in hardcover, paperback or kindle.

Exercise and Fall Prevention

As people get older one of the biggest threats to their health and independence are falls.  A brief review of the statistics on falls provides a sobering view of the threat.

 Falls are the #1 cause of death as a result of unintentional injury among people 75 and older and the #2 cause of death as a result of unintentional injury among people age 65 – 74.
Falls are the #1 cause of non-fatal unintentional injuries treated in hospital emergency rooms in every age group except ages 15 – 24.
Fall result in the second most expensive worker’s compensation claims with an average cost of $23,929.
One out of every three people older than 65 will fall this year.
50% of the people older than 65 who have fallen will fall again in the next 12 months.
Most falls are unreported (even serious falls) because senior fear losing their independence, and many seniors would rather die than lose their independence.
The treatment of osteoporosis with drugs is very ineffective at preventing fractures because it does nothing to prevent the primary cause of fractures which is falls.
Modifiable Risk Factors for Falls

Strength (in particular lower body and core strength)
Mobility (of ankle, knee and hip in particular)
Fear of falling from previous fall/s resulting in altered gate and restricted activity levels which further increases fall risk
Poor Balance which has three systems (visual, inner ear, proprioception)
Impaired Vision
Cognitive Status/Mood
Environmental Factors (slippery floors, rugs, poor lighting, etc.
Medication Side Effects
Exercise for Fall Prevention
Exercise can help address several fall risk factors including strength, mobility, balance along with improved cognitive status.
The most effective exercise boosts lower body and core strength while including a balance component that can be adjusted to each individual’s current capabilities.   This exercise should be weight bearing whenever possible and functional in nature.
reACT – Rapid Eccentric Anaerobic Core Trainer

One of the finest ways to address the exercise component of a fall prevention program is the use of the reACT Trainer.    The reACT Trainer provides a no impact training stimulus with a self-selected range of motion and allows for progressive balance challenge to fit just about any ability level.  
The reACT Trainer is a functional eccentric trainer meaning it provides eccentric dominant exercise that is highly functional in nature with strong emphasis on integrated functional movements in multiple planes of motion with the ability to adjust movement speed to increase or decrease the challenge level.   It is also a very safe training modality.
For more information on how the reACT Trainer can help prevent falls check out the following videos:
https://www.youtube.com/watch?v=IBjKkvuXrYE&t=213s

https://www.youtube.com/watch?v=WXljK8BbhLg&t=309s– instructional video

WORKOUT ANYTIME in the Cincinnati Enquirer Community Press

WORKOUT ANYTIME in the Cincinnati Enquirer Community Press in an article titled, “Mercy Health’s new hospital could be economic boon to township.” The article focuses on the opening of the Mercy Health – West Hospital in Green Township and how that is creating an opportunity for businesses in the community including the new Cincinnati WORKOUT ANYTIME. The article begins with details about the new hospital, then goes into the economic development going on in the area. The article then details some of the businesses opening in the area, including Tony Petrocelli’s Cincinnati WORKOUT ANYTIME. The article includes this information provided by No Limit Agency: “Cincinnati resident Tony Petrocelli is opening the first Workout Anytime in Ohio near the hospital, in a space that was previously a WesBanco and had been vacant for six years.” The article ends with info on other businesses and plans for development in the area.  Click here for the entire article or begin below.

Mercy Health’s new hospital could be economic boon to township
By: Kurt Backschneider

GREEN TWP. — While township leaders are excited about the state-of-the-art medical services Mercy Health is bringing to the West Side, they’re also looking forward to economic development opportunities the new hospital will help attract.

Mercy Health – West Hospital, a 250-bed, full-service hospital off of North Bend Road near Interstate 74, will open for business Sunday, Nov. 10. 

Roughly five years in the making, the $240 million hospital will feature the latest advancements in patient care and comfort, new technologies, private patient rooms and expanded medical services for West Siders.

(Read More)

Astaxanthin – Anti-Oxidant Superstar

While many antioxidants can be obtained by eating organic fruits and vegetables, astaxanthin is derived only from a specific microalgae called Haematococcus pluvialis.  The algae uses astaxanthin to protect itself from intense sunlight, ultraviolet radiation and low nutrition.

There are two natural astaxanthin sources: the microalgae that produce it and the salmon and krill which consume the algae directly. The best resources for these foods are wild-caught Alaskan Salmon and Krill Oil Supplement, which offer many other nutritional benefits.

Research indicates astaxanthin may benefit those suffering from inflammatory conditions including arthritis, rheumatoid disorders, metabolic disease, as well as cardiovascular, neurological and liver diseases.

Astaxanthin can also help to increase your muscle capacity and stamina, decrease workout recovery time, and decrease muscle pain.  Other proven benefits include:

Reduction of Inflammation
Protects Vision
Enhances Heart Health
Decreases Oxidative Stress
Protects Against Sunburn
Boost Your Immune System
Helps Prevent and Fight Cancer

Astaxanthin and Eye Health

Astaxanthin is an extremely powerful anti-oxidant:  65 times more powerful than vitamin C, 54 times more powerful than Beta-Carotene and 14 times more powerful than Vitamin E.
Astaxanthin crosses the blood-brain barrier AND the blood-retinal barrier which is a huge deal for your brain AND your eyes!

Astaxanthin is a member of the carotenoid family of anti-oxidants that include beta-carotene, lutein and zeaxanthin.   Of all the carotenoids, only zeaxanthin and lutein are found in the retinas of your eyes.  This is because your eye is a highly light and oxygen rich environment, and it needs a large amount of free radical scavengers to prevent damage. 
Scientists have specifically studied astaxanthin for its effects on the eyes and discovered that it is completely safe, and much more potent than all the other carotenoids.   Specifically it has been shown that astaxanthin supplementation can be effective in preventing a whole list of eye diseases including:

Age-Related Macular Degeneration
Diabetic Neuropathy
Cystoid Macular Edema
Central Retinal Arterial and Venous Occlusion
Glaucoma
Inflammatory Eye Diseases including retinitis, iritis, keratitis, and scleritis

Astaxanthin is one of the few anti-oxidants that you should consider supplementing because you cannot obtain the recommended dosage from your diet alone.      The good news is that there are excellent Astaxanthin Supplements available from companies like Jarrow, Doctors Best, and Swanson to name a few.   It should be taken with a meal with fat because it is fat soluble with dosage from 4mg – 12mg per day although there are no harmful effects from higher dosages.

My Travel Tips

I started traveling as a consultant form April of 2002. I have now completed ten years of travel. For my assignments I travel both economy and business class and use a variety of airlines. To commemorate my ten years of traveling I have compiled some travel tips. They are aimed at reducing the stress of modern travel to enable you to have a pleasant journey with the minimal amount of discomfort and hassle.



These are my top travel tips based on my travel experience since 2002 and the post 9/11 world. (E6K9HKXKPPNE)


Clothes and shoes


1. Do not wear a belt – this will help you to pass through security without having to go through the hassle of taking it off and putting it on. It also helps in blood circulation.


2. Do not wear any items of clothing which contain metal buttons, clips, labels etc.


3. Do not wear clothing with a lot of pockets – you can forget a coin or a key and will set off the metal detectors


4. Do not wear tight clothes this will cut your blood circulation and make the journey uncomfortable.


5. Don’t wear baggy clothes; wear comfortable cloths that are close to your body – lets face it you will be profiled no matter what they say; so wearing baggy clothes sets off alarm bells with the security personnel. They are more likely to pad down a person wearing baggy clothes as opposed to someone wearing well fitting clothes.


6. Try to wear slippers or sandals, if you feel clod wear a pair of socks with the slippers or sandals. If you need to wear shoes wear thin sole shoes (without any metal fittings) with no shoelaces. This will either negate the need to take off your shoes or make it easy to take off and put on shoes


7. Try to dress in the thinnest possible layers of clothes instead of wearing / carrying bulky heave jackets / coats so that you can remove or add depending on your level of comfort. Thin clothes weigh less take less space in your hand luggage / carry on luggage.


Money and Travel Documents


1. Do not carry any coins. If you must carry coins in a small transparent plastic bag and put the coins in a pocket of your carry on luggage.


2. Always carry more than one currency: example if you travel via to London to USA carry British Sterling Pounds as well as Dollars.


3. Try to pre pay for as many expenses as possible before departure. This helps to minimize the amount of money you need to carry, as well as be able to bargain to the maximum and not be made to decide on the spot about your travel options. Use the internet and always cross check and read reviews of restaurants, taxi service and other services you are likely to pay for in cash so that you don’t get taken for a ride.


4. Carry globally accepted credit cards as a payment option and for emergencies.


5. Always take travel insurance; you never know when you might fall sick or get injured.


6. Always carry your passport, visa, travel insurance, hotel reservations, travel vouchers, invitation letters, letters of sponsorship etc in one safety pouch / folder. This way you don’t have to look for them in multiple places. Keep them safe and close to you.


7. Never ever give the bag containing these documents to anyone (except your family or personal assistant / colleague).


8. If you are using a VIP service to breeze through emigration and customs make sure that you have line of sight of the person at all times. Confidence tricksters pretending to be service providers will walk off with your belongings.


Baggage


1. First check the weather of your destination (12 hours before departure – weather forecasting gets better when nearer to the dates concerned.)


2. Finalize your clothes 12 hours before you travel, based on above.


3. Choose clothes that can be mixed and worn: Take white shirts / blouses which can be worn with any pants / skirts and jackets. Take a few different ties / scarf and accessories so that you look different but use the least number of clothes. I am a firm believer in the use of hotel laundry services. I prefer to get the items laundered at the hotel and avoid carrying your entire wardrobe with you when you travel. Make sure that you as well as the hotel has a clear understanding of the difference between dry cleaning and washing of clothing items.


4. Try to use the minimum number of bags as possible.


5. Golden rule is that: if you do not need an item during the journey / flight, then it goes in with the check in luggage. One of the benefits of the post 9/11 world is that the airline industries ability to track and link you baggage to you has improved tremendously. So you do not have to carry any back up clothes in your hand luggage just in case your luggage gets lost.


6. If you do not have any check in luggage then you need to ask the question do I really need to carry the item or can I buy it at my destination and use it. Remember most consumables (Soap, Shampoo, Mouth wash etc) are similarly priced everywhere and most hotel now provide them in the room). It’s worth trying a new brand of an item to reduce the weight and hassle of taking them in 50 ML clear bottles etc.


7. Have a good idea of your baggage allowance. Especially if you fly economy class; it may change from airline to airline. The rule of thumb is that if it is difficult for you to carry your check in baggage (Standard international size) it is probably over weight. An average person can easily handle 20Kg. Use this principle when standing in check in queues. Avoid standing in queues with people who have difficulty in handling their luggage. They will take longer to check in as they will have to pay for excess luggage or repack them.


Loyalty Cards


1. Try to get as many loyalty cards as you can. Before you embark on your journey have the relevant loyalty cards sorted out and keep them with your travel documents and put the rest in you carry on luggage. You never know when they may become handy.


2. In my opinion the top benefits of loyalty cards are:


a. Priority check in – the shorter the queue you need to stand in the less stressful it is to you.


b. Excess baggage allowance – you never know when you might need it, especially if you travel with your wife / partner who will shop while you are attending to business.


c. VIP services for priority emigration and customs clearance.


d. Access to a lounge with free broadband internet connection


I recommend you go for loyalty cards that provide at least one of these benefits and not bother with ones that just offer air miles for ticket discounts and free food.


Hotels


1. Where ever possible I recommend you insist on staying in an establishment with at least a 3 star classification. This should provide good enough comfort & facilities for a business traveler. However I have come across many hotels which are classified as 3 stars but are more like cattle sheds. If clients and budgets permit always stay at the highest class hotel in your destination.


2. The main facilities you should be looking for when selecting a hotel are:


a. Airport pick up and drop


b. Free broadband internet access


c. Complementary pressing of one set of clothes per day (shirt / blouse, trouser / skirt & Jacket) + shoe shine.


d. Free copy of the local English newspaper – This is a helpful tool to get a feel of the local environment, best places to dine and entertainment information and of course to get an insight in to what’s happening around you.


3. Always stay as close as possible to your customers / clients. This will reduce local travel time and getting stuck in local traffic, which you may not know about or will not be able to find out before arriving at your destination. Best is to stay within walking distance. By this you can avoid the need to haggle with taxi drivers every morning and evening if meter taxis are not available.


4. I recommend you stay on B & B basis; this gives you a lot of flexibility to move around the city and meet the locals during meal times. This will also help you get a feel of the general business environment, mood of the people as well as get exposed to the local culture.


Flights


1. Always use major airlines where possible. The trend now is to go for budget airlines. I too subscribe to this philosophy but with a few considerations. They are:


a. Safety – As with all one needs to be comfortable with the safety systems of the airline. Some budget airlines operate state of the art new aircraft, while others operate others which do not have a good safety record. So each of us need to make this choice for ourselves.


b. Reliability – Other than Europe and North America budget airlines are not regulated in a way they are liable for delays and cancellations. Unless you have a very good insurance policy you may run the risk of having to incur the cost of delayed and cancelled flights, additional hotel and transfer costs. Budget airlines will cancel / delay / amalgamate passenger manifests for flights if they do not have the desired number of passengers for a flight to minimize losses.


Major airlines will operate scheduled flights, and if for any reason they do cancel a flight they will look after the passengers better and try to route you to your destination with the minimum hassle.


2. Try not to use domestic airlines. As much as possible try to get to and from your destination via an international flight. Changing to domestic airlines may be cheaper but you need to consider the following:


a. How much time do you loose and is it worth. Most domestic flights operate at much lower altitudes and will fly at a lower speed. International flights will fly higher and faster and can provide you with considerable time savings.


b. You may have to go through immigration in one airport and through customs in another airport. This may actually take a longer time.


c. You will increase you total transit time (Time spent not flying) and for a business person time is money.


d. You may need to move your luggage over long distances between domestic and international terminals.


e. You may need to pay again for excess baggage


f. Domestic airlines too will cancel / delay / amalgamate passenger manifests for flights if they do not have the desired number of passengers for a flight to minimize losses.


g. Most domestic airlines operate very old aircraft which may have a bad safety record.


Jet Lag


1. Living in the destination time zone – From the time you start your journey try to do things such as taking meals and sleeping according to the destination time zone. This will give your body extra time to adjust to life in the new time zone. Most airlines try to do this using the cabin lights to mimic the time of day. Unfortunately only the modern aircraft have this feature.


2. Drinking fluids. – You must be well hydrated 24 hour before the flight, So refrain from:


a. Heavy exercises that make you loose water through excessive sweating


b. Drinking too much alcohol the day before you travel.


3. Reduce the build up of static electricity on your body and clothes. Once at your choice of accommodation at your destination find a wooden or cement / tile floor. Take off your shoes and socks and walk on the surface for a few minutes. The best solution is walking on grass however this may not be possible at your destination. However this may be an option for you on your return to your home.

The Question of Alcohol in you Diet

Alcohol, like caffeine and nicotine, is a drug. As such, it is capable of bringing about serious damage to mind and body when taken over a long period of time. Made from the fermentation of carbohydrates with yeast enzymes, alcohol is rapidly absorbed through the digestive system, affecting coordination of the muscles, nerves, and vision. It also stimulates stomach secretions, inhibits mobilization of lymphocytes so that the body’s ability to fight infection is reduced, and causes sludging in the red blood cells, thereby reducing oxygen to the heart and lungs. And it affects the brain, adversely affecting the specific centers that govern self- control, judgment, and personal inhibitions.

Alcohol is a depressant. The transient feeling of well-being that goes with a couple of glasses of whisky or a dry martini—the “lift”—is followed by a series of miseries to which your body is subjected, not the least of which, for a woman, is the effect drinking alcohol has on the liver. And the insidious thing about the detrimental effects which alcohol has on health and beauty is that they occur even to the average social drinker, not just to the serious drinker and the alcoholic.

A joint study by Dr. Charles S. Leiber of the Section of Liver Disease and Nutrition at Bronx Veterans Administration and Dr. Emanuel Rubin of the Department of Pathology at Mount Sinai School of Medicine showed that too much social drinking can cause serious damage to the liver, even though the drinker may feel fine, act normally under the influence of alcohol, and not be an alcoholic. Leiber and Rubim took a group of healthy nonalcoholic volunteers and put them on a carefully controlled eight-day drinking regimen. Then they tested the subjects’ livers to see what changes, if any, the alcohol had caused. The amount given to a particular group was considered equivalent to the average intake of a business executive-7 ounces of 86-proof whisky per day for the first four days, 11 ounces for the new two, and then 14 ounces for the last two. The results were surprising: there was an increase in the fat levels in the subjects’ liver of from five to thirteen times, all in only eight days, and in spite of the fact that the diet of the subjects had been supplemented with vitamins.

Diet Start

Similar studies have turned up similar results. Researchers have also found that liver-cell damage and the increase in fat in the liver can be reversible if the drinker abstains from alcohol for long enough. But longterm damage to the liver resulting from daily consumption of alcohol over the years can be irreversible. Persistent drinking can also be a precursor not only to specific diseases of the liver such as cirrhosis, but also to other toxic conditions in the body.

Next to the skin, your liver is your body’s largest organ. In many ways it is also the most important. One could, for instance, live without a stomach if necessary but never without a liver. It is the body’s chemical purifier, performing more than five hundred different functions, many concerned with detoxifying the system from all the drugs, pollutants, and poisons you take in every day, including alcohol. If the liver is overworked or worn out by excess alcohol consumption, eventually and unavoidably your whole body suffers. Biochemists used to believe that excess alcohol was no more damaging to the liver than too much sugar or too much fat in the diet; that the real damage to the liver came only from malnutrition. But these theories have been disproved. Both the quantity of alcohol you drink and the duration of time over which you drink it are important factors in determining liver damage.

Because the liver is responsible either directly or indirectly for controlling levels of many hormones in a woman’s body (particularly estrogen), when liver damage occurs as the result of a diet too high in fats or of drug taking or long-term alcoholic consumption, the endocrine balance can be severely upset, leading not only to disruption of the menstrual cycle but also indirectly to feelings of depression, anxiety, and chronic fatigue.

These troubles may have another cause, also related to alcohol. In order to metabolize alcohol, your body calls on its reserve of many B- complex vitamins which act as coenzymes in the process. When one eats foods containing natural concentrations of carbohydrates or sugar, such as grains and fruits, the B-complex vitamins necessary for their proper digestion and assimilation are provided by nature in the foods themselves. But the B-complex vitamins have been discarded in the processing of highly refined sugars and alcohol. So the body’s own reserves can easily get depleted when you drink alcohol and eat refined sugars. Results of this depletion are many, the most common of which can be fatigue, a craving for more alcohol or sweets, or diverse emotional complaints from severe premenstrual tension to simple feelings of chronic misery.

These are just some of the reasons why the Lifestyle Diet excludes alcohol in quantities of more than a glass of wine a day. This may seem like a tremendous sacrifice to you if you are used to taking a great deal more, but once you eliminate stimulants such as coffee, tea, and alcohol from your life and begin to experience the enormous sense of well-being that comes with the low fat, low protein, complex carbohydrate diet (and all the other important things that also go with discovering and expressing your potentials mentally and physically, such as deep relaxation and exercise), you will never miss it.

The carbohydrate jewels

By upping your intake of low GI fruit and vegetables, you will not only be on your way to becoming leaner, but you will have a profound effect on your health. The amazing phytonutrients (plant nutrients) that you find in brightly coloured raw organic fruit and vegetables are clever little substances that can protect you from ill health in various ways, although many people’s diets are sadly lacking in them.

Phytonutrients can help regulate the immune system, stabilize vitamins in body tissues and protect from serious illnesses, such as such as cancer. They do this by working as antioxidants alongside vitamins A, C, E and D, and the minerals, selenium and zinc. As a team, these powerful compounds have the ability to slow down the damaging oxidative process caused by those ‘enemies of a healthy state’, the free radicals. Antioxidants can also rid the body of these free radicals, which are the natural waste products of metabolism, which, if left unchecked, can lead to degenerative disease, by causing imbalances on a cellular level.

Diet Start

Take note that these free radicals are also found in overheated oils and fried foods, another good reason to kiss junk food good bye.

They aren’t classed as essential nutrients, but without phytonutrients your sense of wellness would be severely compromised.

They work in the body at deep physiological and biochemical levels, and luckily enough are to be found in low-density/low GI fruit and vegetables. Eating these raw wherever possible is the key to maximizing their life- enhancing qualities. Cooking destroys many of the benefits that you will reap if you include a colourful array of energy-boosting raw fruit and vegetables in your daily diet.

Life is a balancing act

So now you have a better understanding of the impact that the wrong carbohydrates can have on your body, and have established that you need to incorporate more of the colourful and low GI fibrous fruit and vegetables in your diet. But man cannot live by carbohydrates alone. You will have to take a close look at the two other macronutrients that work hand-in-hand with carbohydrates to provide energy and nourish the body: protein and fats.

The key to balancing blood-sugar levels, banishing insulin resistance and losing excess weight lies in successfully balancing these three macronutrients.

It’s Not Just You™: AMD’s Crimson Drivers, Radeon ReLive Not Working At First [Possible Fix]

Just a quick post before I go to bed here, that I wanted to share about the AMD Crimson Drivers that I got notified about just a bit ago, which included AMD’s “ReLive”, their new Game [and Desktop] Recording utility – ‘built-in’ to their 16.12 Drivers… For those who couldn’t get it working right away (I see posts about it already in the Official AMD Forums), I couldn’t either… And although I eventually did, I wanted to let others know, if you are having issues with it: It’s Not Just You™

I was already starting to get tired when I saw a notification of the Driver Update – and I had no idea there was a nifty Game Recording ‘app’ incoming with it [I haven’t been reading much lately, I have another Cold for pete’s sake!]. For AMD GPU owners, waiting patiently to see if AMD was going to come out with their own Game Recording utility – it’s here! The future is now!

Check out AMD’s Video on their ReLive edition of Radeon here: 
https://www.youtube.com/watch?v=nRSm12lwRe4

[I really wanted to start Testing it all out tonight, running Benchmarks and collecting Data for a TestRun or a Quality Test with it; but my sleepyness is actually building and getting the better of me, so I better go soon – I wanted to share what I did this evening though, to get it working (for me), before I go…]


Without going over the few things I tried first that didn’t work (setting configuration, testing with different games, etc), here’s the steps to take that finally got it running, for me:

  • Download the Latest AMD Drivers via their main Website (http://support.amd.com/)
  • Uninstall the main AMD Drivers via the Control Panel > Programs > Uninstall/Change Program
  • Reboot
  • Install AMD Drivers via the Download from their Website
  • Reboot

That’s it!

After that, even though I have a 200 Series* AMD GPU at the time of this writing**, I was able to get ReLive up and running, even playing a little bit with the configuration and making a couple of short test recordings, before I came here to write this quick ‘tip’ of what might help get it going for others… It’s a larger ‘step’ (messing with Drivers, as opposed to just messing with Configuration/Settings); but I always like to Troubleshoot from the smallest steps first (eg. changing some settings) to larger steps (eg. re-installing software) to huge steps (eg. OS reinstallation, hardware changes). Thankfully, it started working just fine after only a bit of a ‘larger step’ taken.


Although with the most recent versions of Windows you don’t always have to Reboot it when making changes, it helps to get everything ‘in order’ in the background, re-initializing all hardware and Drivers fully – which is why many installers/software still get you to do it through their installation programs.

I plan on putting the Game Recorder through it’s paces, working on a TestRun and a QualityTest, to come in the future here at The Blog – for now though, hopefully ReLive can get up and working for you, too – good luck, and if you are having troubles with it, remember – It’s Not Just You™!

* The AMD page on ReLive at their main website (http://www.amd.com/en-us/innovations/software-technologies/radeon-software/gaming/radeon-relive) shows only 400 Series GPUs as ‘Officially Compatible’. Although it does not state ‘it will not work with earlier Series’, it is unknown 100% at this time if it is possible, hence my mentioning it above

** Disclaimer and Personal Veracity Statement: Although I currently own an AMD GPU, I have owned NVIDIA GPUs in the past and will do so in the future. I have no personal preference between the two, purchasing one or the other as Upgrades depending on my needs at the time and my financial limitations at the time I choose to Upgrade. I have not and will not receive any compensation for mentioning or talking about either companies’ products. I am merely an enthusiastic user (of both).

WORKOUT ANYTIME in Club Industry

WORKOUT ANYTIME in Club Industry

In an article titled, “Reaching Landmark 50 Gyms Open, Workout Anytime Prepares for Rapid Acceleration in 2014” features WORKOUT ANYTIME’s 50th club opening. Along with opening their 50th location WORKOUT ANYTIME is looking at rapid growth acceleration through the 2014 year. WORKOUT ANYTIME’s CEO and co-founder Steve Strickland outlines a few important development metric’s of the year such as in 2013 WORKOUT ANYTIME doubled in locations.
You can view the full article here. 

Thinking about Next Year

Today was the last official day of post-planning, and for the first time in the history of my teaching career, I finished cleaning out my classroom and wrapping up my paperwork on time — no extra days required this year! Granted, there was some definite “Oh, I’ll just shove this in this cupboard and deal with it in July” happening around 5pm today, but nevertheless – I’m done!

The cleaning process was prime opportunity for me to think about what I want to do differently next year, and I’m excited to be linking up with Finding JOY in 6th Grade for her “What Will You Do Differently?” Linky. Here’s what I came up with:

As you may have read in my Go Paperless Challenge series, I’m very committed to going paperless in my classroom. I had a great test-run during the last 6 weeks of school where I got to experiment and figure out what works and what doesn’t. I’ll be sharing many of those lessons here over the summer, but I’m DEFINITELY planning to go paperless. It made such a difference in my organization, efficiency, and productivity, and I MUST keep it going next year!

As we were cleaning out the classroom during the last week of school, I realized how much storage space was being occupied by notebooks, folders, and papers that my students won’t need next year in a world where we’re paperless. I’ll be giving lots of thought to how I can better use the newly-available spaces next year. My initial thought is to put out more math materials for students to access routinely.

I did the book study for Guided Math last summer, and I worked on my math endorsement this year. I feel like I’ve been working very hard on math, but I’m still not quite getting the results that I want. I want to revamp my math instruction again next year to do more of a workshop approach with guided math groups and more individualized tasks and problem solving. Now that I have a better understanding of the Common Core State Standards for math with a year of teaching them under my belt, I feel ready to take the next step.

What are you going to change for next year? Feel free to leave me a comment, and definitely link up with Finding JOY in 6th!

joyin6th Homepage

ever worry about what happens to your car when you drop it off at the dealership? Worry no more. Leave your cell phone in the car, with the camera on, or put in a Go Pro, or dash cam

Seriously, last week some customer did this at the dealership I work at, he wanted to bust the guys who detail the inside of the cars

http://tywkiwdbi.blogspot.com/

Men’s Body Click Diet part 2

What I’m giving you here is a chance to climb the ship’s mast with me so that from its top we can see far over the horizon of medicine. The view from the masthead is based not so much on my daily activities as a practicing physician but on my mission to search the seascape of scientific research for courses that can help prevent my patients from developing prostate trouble. What I see from the top of the mast is a body of evidence that is solid enough to support these simple changes in behavior, especially considering that there’s zero risk in consuming flaxseed and soy protein.

The best evidence is based on studies done in a couple of places in the world, where prostate troubles are rare. Solid epidemiological studies that show a lower incidence of prostate cancer in men consuming foods popular among Finns and Chinese — rye bread for Finns and soy for Chinese.2 And he has carried out elaborate chemical analyses and experiments to show which substances in these foods provide the protection.

For years before his research was done, it was assumed that the Finns’ genetic history accounted for their lower incidence of prostate cancer. Most modern Finns come from a small number of people who migrated to that part of the world many years ago, so they are a rather distinct linguistic, racial and genetic group. It turns out, however, that it’s not their genes but their diet that protects them against certain cancers. And the dietary factor that is most significant is a sourdough rye bread that is eaten by people consuming a traditional Finnish diet. This whole-grain, heavy- duty bread is made out of ground whole rye seeds without anything removed. The leavening is provided by lactobacillus (acidophilus) instead of yeast, which is used to leaven almost all bread consumed in other parts of the world. What’s key is that the rye fiber contains lignans that modulate hormone chemistry and reduce the risk of reproductive cancers.

Diet Start

Eastern Europeans have traditionally used flaxseeds as a source of food and medicine. Flaxseed oil, which makes up about one-third of the weight of the seeds, has extremely healthy properties that also provide particular benefits for the prostate gland. But here we’re talking about the fiber in the flaxseed. The best way to use the seeds is to grind them in a coffee mill. You can then consume the fine, fluffy powder as part of a shake or add it to a variety of other foods. Your aim is to eat a heaping tablespoon per day.

Besides rye and flaxseed, there are other foods that contain lignans. Some of the best sources include legumes (especially lentils, kidney, fava and navy beans), seeds (like sunflower seeds), seaweed, cereal brans and whole grains.

There is also a solid body of evidence supporting the role of soy protein in reducing the risk of prostate cancer. For example, research has shown that isoflavones, substances contained in soybeans, modify testosterone metabolism, decreasing the risk for both benign prostatic hypertrophy and prostate cancer.3 Incorporating soy protein in your diet doesn’t require you to change what you eat, although it’s fine to eat more tofu, miso and other soy products if you enjoy them. The simplest, quickest way to consume soy protein is by stirring soy protein isolate, a relatively tasteless substance, into some of the food you are already eating.

Foods like soybeans, flaxseed and rye contain information derived from phytonutrients, which keep animals in synchrony with the rhythm of the seasons and which have profound effects on our own reproductive systems.

Prostate Inflammation or Nonspecific Prostatitis

Your prostate gland usually doesn’t speak to you until it’s in some advanced state of trouble. When it does, it has only two voices. One is expressed through pain or difficulty with urination and the other is just plain pain, which is almost invariably felt in the midline of your body. The spectrum of difficulties includes inflammation, enlargement and cancer. While there are more or less pure representations of each one, the lines between them are often blurred. All three, but particularly enlargement and cancer, are addressed by the preventive measures included in the Body Clock Diet.

Let’s start with inflammation, which is the medical term for some combination of redness, pain, swelling and heat that almost always accompanies infection but may also represent your body’s reaction to noninfectious irritants or allergens. The flame of prostate inflammation is experienced as burning with urination. This is as much a result of inflammation of the tube through which the urine passes out of the penis (the urethra) as it is due to inflammation of the prostate, per se, which lies astride this tube, just beneath the bladder. Germs that infect the urethra, such as the gonorrhea germ, may ascend it and get into the prostate gland. There, the alkaline environment and blood supply, which are conducive to bacterial growth, make it much harder to treat the infection with antibiotics than, say, a sore throat, a boil or an uncomplicated pneumonia. Because the germs that infect the prostate are difficult to extract from apatient for a culture it has become a common practice for doctors to treat symptoms of prostate inflammation with antibiotics without knowing what germ, if any, might be there.

The diagnosis in this situation is ‘nonspecific’ prostatitis, which is a well- accepted medical term. But when you stop to think about it, it’s peculiar. According to medical principles, when there is an infection, the perpetrator is almost always a particular germ. The prostate, like all internal tissues, is not likely to be infected by more than one germ at a time. The implication is that if there’s an infection, it’s quite specific. How then do we come up with the diagnosis ‘nonspecific’ prostatitis? It’s a result of several factors; efforts to recover a germ are to no avail, the prostate acts as if there’s an inflammation — with swelling, pain, difficulty urinating and sometimes cloudy or pussy urine — and antibiotics are at least temporarily soothing. But after antibiotic treatment, this problem recurs more often than other infections.

Math Resources for Teachers

It has been a whirlwind couple of weeks! I went on a mini-vacation to a wedding in Nashville, and then I attended a 3-day workshop on The Role of Mathematics in the International Baccalaureate Primary Years Programme. I think this is the summer of math learning for me! I love attending workshops because I almost always leave with new ideas and new resources to explore. Even if you don’t work at an IB school, there were lots of useful resources worth exploring.

(Apologies in advance — this will be a long post!)

Book Resources

A Mathematical Passage: Strategies for Promoting Inquiry in Grades 4-6

This book was featured because of it’s Mathematician’s Bill of Rights on p. 139. The Bill of Rights lists the “rights” that all mathematicians have — things like “solve problems in ways that make sense to me” and “capitalize on mistakes as sites of learning.” I’m definitely interested in reading more from this book. I’ve read other things by David J. Whitin before, and they’ve been great.

Math Matters: Understanding the Math You Teach Grades K-8

I had a chance to browse this book during the workshop, and it looks like a good one for understanding how to approach math conceptually. May not be the most exciting read in the world (would you look at that front cover?!), but it looks like a very useful book if you’re going for an inquiry oriented math classroom.

Good Questions for Math Teaching



This book is great for creating open-ended questions that will really get students thinking about the math involved in problem solving rather than just looking for a specific answer. It uses questioning techniques to develop more sophisticated mathematical thinking, and it has a wealth of information.

Number Talks

I was a little surprised how many teachers at the workshop were already familiar with this book and using it given that I’m usually up on all the latest and greatest math books, but nevertheless, this book had rave reviews. Of all the books that I’m reading this summer, this is the one that I suspect will have the biggest impact on my teaching this August. I’ve really enjoyed reading it, and I have so many ideas about how I will put it into practice this year. If you haven’t gotten it already, I couldn’t recommend it more!

Good Questions: Great Ways to Differentiate Mathematics Instruction



I know I’ve talked about this book before, but we spent a lot of time talking about open questions and parallel tasks at the workshop, so I had to share this book again. I used this book non-stop at the end of the school year, and I loved how it was so perfectly aligned to Common Core in math. It couldn’t be more teacher-friendly.

Online Resources

Visible Thinking Routines

I’ve been introduced to the Visible Thinking Routines from Harvard’s Project Zero before, but it was good to be reminded about them. These are some great activities to prompt student discussions and thinking. One example of this is “OTQ – Observe, Think, Question.” For this activity, students see a picture and spend a few minutes describing what they see/observe. Anything they observe has to be rooted in the picture and not based on inferences. Step 2 is “Think” – what does this make you think about? This is where students can share their inferences and cite evidence in the picture to support why they think that. Finally, students “question” and share what they wonder about based on the picture. I like that these routines slow down student thinking.
Math Class Needs a Makeover

We watched this video in the workshop, and if you’ve never seen it, I highly recommend that you take the 10 minutes to watch Dan Meyer’s TED Talk. In it, he talks about the problems with current approaches to math instruction — largely fueled by larger textbooks and math programs — and how to turn those materials into the types of problems that will challenge your students to become patient problem solvers. I was really inspired by this video, and I hope that you will be, too.

Have a great weekend! I’ll be back to blogging more regularly next week!



Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and/or believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

HOW TO DECORATE A KITCHEN MINIMALIST

A café is a place where people meet, talk and relax. The ambience of a café is loved by many people and that is why many of them visit one daily after work so that they can talk and share things with their friends and relax after the long day. One can decorate their kitchen with a café theme so that they have a coffee shop at home, or they feel the same. Creating the same theme as that of a coffee shop is a brilliant idea to add a different touch to the kitchen and make it nice and cozy also.

Minimalist Decorate a KitchenMinimalist Decorate a Kitchen

Decorating the kitchen with a café theme is not at all difficult or expensive as many would think it to be. People have two options when they want to incorporate a café theme; they can either completely change everything in the kitchen or they can use what is there, and use it and still create the theme. The things that one can use along with the colors and the final touches, is what matters the most.

A basic thing that one can add to the kitchen which will be useful also and will also help to create the café theme is to use a table with four chairs in the space. The chairs should be comfortable and for this one can add cushions to it. The table should not be crowded with too many things and under table you can opt for a modern carpet or rug.There are several types of these rugs you can get including wool area rugs, contemporary rugs and even discount area rugs that you can find online.The other thing that one can do easily is to paint the walls of a different color. The color should be bright and be chosen keeping in mind the natural light that comes in the kitchen.

Near the table that one keeps in the kitchen, one can place a book shelf and place some nice coffee table books or books of art and poetry. Another thing that can be done to create the café theme is that one should only be able to see things related to a coffee shop in the kitchen. The table should only have sugar and coffee beans etc, the counters should only have the appliances that are used in a coffee shop like the blender or the coffee maker. It is not that the kitchen cannot have other useful appliances; all that one needs to take care of is that these should be kept in the cupboards and should not be seen as this can ruin the café theme that one wants to create.

Teenager’s Room Artist Theme

Teenager’s Room Artist Theme

Teenager’s Room Artist Theme

MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

Hülsta German Furniture Maker showed some really incredible ideas of life that may be adopted by the style-conscious people who want to give their house a futuristic look and ergonomic. The perfect blend of stylish design with bright pink and black give the whole to create a very refreshing, but a look of the space age. The leather was added to an authentic touch and royal with a minimalist effect adding to the “cool factor”. You can either go all black look metallic or deliberately throwing red and white, while maintaining the class and elegance.

LIVING ROOM LAYOUTZ FROM HÜLSTA

LIVING ROOM LAYOUTZ FROM HÜLSTA

MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

LIVING ROOM STYLE LAYOUTZ FROM HÜLSTA

LIVING ROOM STYLE LAYOUTZ FROM HÜLSTA

LIVING ROOM LAYOUTs DESIGN FROM HÜLSTA

LIVING ROOM LAYOUTs DESIGN FROM HÜLSTA

First Impressions – Google Play App: “Screen Recorder” by Kimcy929 [App Mini-Review]

This article has been initially posted as Text-Only at this time, to speed up publishing, focusing on a certain issue. I will return to this posting and add more data on Quality and Performance, Screenshots and then eventually Share it on Twitter/Google+/etc… Soon™

[This past Christmas, my father gave me a neat little tablet to play on – Thanks, Dad! I have been enjoying the heck out of it, learning what it does (cough how to use a tablet cough), what applications it can run (I can write a Blog Post laying down!) and of course, what games I can play on it, heh. I hope to give some Tutorials/Walkthroughs and Reviews on Games and Apps from it sometime… Oh wait, here’s one now! haha]

The Google Store page for the app, with the ‘Play’ button removed [I felt it was a bit distracting, making people think there might be a ‘video to play’ here at The Blog], replaced with The Blog’s ‘G’ brevity logo version.
The Google Play logo in the upper-left will be used to denote images that come ‘directly’ from the Google Play website/page for the app for these types of App Reviews/Posts (Unedited other than logos or helpful arrows/etc added).

Google Play App – Screen Recorder by Kimcy929

Straight to it: while this app did in fact ‘record the screen’, it could not record the game sounds themselves (‘internal’ gameplay audio), it only recorded microphone sounds (‘external’ audio outside the device). While this is useful for some, especially Vloggers, I was personally looking for a screen recorder for my tablet that recorded gameplay and the audio from the game, for Tutorials, Walkthroughs, etc.**

Also, an issue arose where ANY video I viewed after installing this app (even videos I had on my device BEFORE installing it) only came up as a black screen, with the message:

“…Video Is Playing On External Display…”





Now, I had not enabled any such option, nor did I connect any External Displays…

I did some research online and found many people running into this issue with various apps and devices (tablets, phones, etc). Looking at the App configuration in the Settings of my tablet for Screen Recorder, I found this app giving itself the ability to ‘draw over other apps’ (which it can do to create on-screen writing, or arrows, which it advertises that it can do on the Google Play Store page for the app).

This is fine and these features are no doubt useful; however, I could no longer view any videos with the built-in Video Player (“complete action using > Video”) – I literally could no longer view any videos I had on my device, at all. [Even with third-party Media Players, such as VLC Media Player, simply viewing any videos was now ‘broken’…]

Video playing of the Video portion of Videos on the Video Player that
plays Videos was like, really broken now

Even after disabling this option that it gave itself without prior warning (found in Settings > Apps > ScreenRecorder > DrawOverOtherApps), all videos still came up with just a black screen and that message – that is, just Disabling the Setting did not ‘undo’ the inability to no longer watch videos in the Video Player. Disabling this setting, then Uninstalling this app, then Restarting the Tablet, fixed the issue [in my case, the only way it was fixed].

While this app does record the screen, allows for microphone use, doesn’t seem to affect gameplay performance very much, and seems to have a decent selection of Resolutions and Bitrates (eg. 1280×720, 8000kbps), also having some additional helpful things like drawing arrows on the screen, etc; it does not record ‘built-in’ gameplay audio – which I personally was looking for** – and it gave itself a power which interfered with normal tablet video viewing afterward… Not only that, but it only recorded a few videos before no longer working, with a message just repeatedly showing up stating, “Unfortunately, Screen Recorder has stopped”.

No changing of Settings (of my tablet or the app itself) was able to remedy this or get past it [the message coming up and no video being recorded]. Reinstalling the app made it work again, but after a few recordings, only that message repeating on the screen was the result, once again. Therefore, considering all of the above [but including the fact that the app must have worked for other people, that is, those not running into this ‘Screen Recorder has stopped’ message problem], this app earned Three Stars at Google Play from me, as of the time of this writing.

Being ‘completely free’ (No Fee and No Ads), and having a nice selection of ‘standards’ like Resolution and Bitrate choices, and having ‘extras’ like being able to draw on the screen; perhaps with some improvements to bugfixing, enhancements to how it handles itself (asking/warning what would happen before utilizing the “Draw Over Other Apps” ability would be helpful to users that might run into a problem with it) and adding the ability to record internal gameplay audio**, Screen Recorder could potentially be a very capable and ‘feature-rich’ screen recording application.

3/5 Stars
★★★☆☆


This app (and a shortened version of the above Review by The Blog (to fit on Google Play’s Review area)) can be found on Google Play, at:

Screen Recorder by Kimcy929
https://play.google.com/store/apps/details?id=com.kimcy929.screenrecorder

[Note: I am not affiliated with Screen Recorder or Kimcy929 in any way, and I have not and will not be compensated by them for writing about them here. I am merely a user of their application and like to help others with helpful information, when I can. The information in this post was obtained on an LG G Pad IV, and therefore might vary slightly from your own experience (Settings, Menus, Performance, Problems, etc) – but I hope that it was still found useful in some way.]

** More on this later… I have recently found out that Google has taken away the ability [temporarily?] to record game output AND game audio at the same time (“internal audio”) in the latest Android versions – save for a small number of possibilities on LG and Samsung devices. But, I’ll cover this at a later time, when I find out more solid details…

The Ten Steps of Body Clock Diet

The ten steps of the Body Clock Prescription that follow don’t take much time or many resources but they go a long way toward helping you stay healthy if you are well or feel better if you are ill.

  1. Follow the Body Clock Diet. Put protein in your morning meal, snacks and lunch, either by drinking the Rhythmic Shake or by emphasizing high protein foods. Move most of your carbohydrates from breakfast, lunch and morning snacks to the evening.
  2. If you scored high on the insulin resistance test, adhere as rigorously as you can to the Body Clock Diet. Because insulin resistance is at the root of so many conditions, you want to capitalize on your ability to bring down your serum insulin level. Eat the maximum tolerable amount of your protein during the day and save as many of your carbohydrates as possible for one meal in the evening. Craving carbohydrates is your enemy in this regard; you will probably need to make a gradual transition to the level of strictness that I’m recommending. That way, your insulin levels will come down step by step; they will not be screaming for carbohydrates while I’m screaming at you not to eat them.
  3. Excess alcohol and caffeine interfere with circadian rhythm. The definition of excess depends on the person and on the time of day. In the early evening, the effects of alcohol are minimized by most people’s capacity to easily metabolize two to four ounces of liquor over a two- to four-hour period. But efficient alcohol metabolism declines dramatically after 10:00 p.m., making late night drinking particularly disruptive. Avoid caffeine except at around 4:00 p.m., the one time of day when its circadian effects are neutral.
  4. Stay away from diet drinks because they send a false signal to your body. They promise the potential arrival of sugar and then, after engaging your body’s mechanism for raising insulin, let you down when the sugar doesn’t arrive.
  5. Get plenty of full spectrum sunlight in your eyes and on some part of your skin every day. When you expose your eyes to sunlight — and I hope it’s obvious that I don’t mean staring at the sun — do it without wearing spectacles. These days spectacles of all kinds block both the healthy and the injurious types of ultraviolet rays. So get out in the sun, take off your glasses and soak up a moderate amount of sunlight — at least one-half hour near dawn or dusk — every day. This does not require sunbathing, simply being out in the sun. If you live in a northern latitude where the winter days are short and there are lots of rainy, snowy or cloudy days, then consider getting a light box like those prescribed for people with seasonal affective disorder. Expose yourself to the light box for at least a couple of hours every day.
  6. Establish a regular time for going to bed at night and getting up in the morning and get sufficient sleep every night, preferably during the natural period of darkness between sundown and sunrise. While you’re asleep, expose yourself to light as little as possible. If you wake up in the middle of the night to pee, don’t turn on the light. Instead, use a dim flashlight or nightlight to light your way to the bathroom. Even a tiny amount of light at night will squash your melatonin peak. Remember that melatonin is an antioxidant and informational substance whose narrowly timed peak in the middle of the night, following a healthy exposure to light during the day, may be suppressed by ill-timed light. Failure to have a peak release of melatonin at night is like missing a bus that comes only once a day.
  7. Encourage rhythmic harmony by learning to breathe with your diaphragm. When you relinquish control to your diaphragm, your breathing will take on the normal rhythm directed by the unconscious part of your brain rather than the potentially asynchronous rhythm generated by your chest muscles. This works especially well when you engage in stressful activities that make you unconsciously hold your breath. For example, when I am on top of a ladder trying to hammer in a nail that is slightly out of reach and I dislodge the nail, bang my thumb or bend the nail, I stop and say to myself, ‘Baker, stop holding your breath and take a deep one with your diaphragm.’ Then the nail goes right in. The same is true for threading a needle, looking for lost keys, worrying about finding a restroom when you’re downtown with a filling bladder, waiting in line at the bank or driving on the freeway.
  8. Engage in some form of rhythmic exercise at the same time every day, preferably in the afternoon when muscle strength is at its peak and most people perform best. If you can walk, walk. If you can swim, do that, especially if you can find nonchlorinated water to swim in and are strong enough to swim with a good steady rhythm. If you prefer, ride a bike. But whatever you do, remember to breathe in a relaxed way, using your diaphragm, so that the effort of your exercise reinforces rhythmic harmony in your body instead of allowing unnatural chest breathing to interfere with it.
  9. Working out to music takes exercise one step farther by permitting you to synchronize your activity with the beat of the music. Of course, the ultimate refinement of exercising to music is dance. If you are ill and unable to move about, then simply listen to music, but really listen so that the music penetrates your being rather than simply acting as a background to whatever you are doing. Some types of music are more healing than others. I asked Millie Grenough, a music therapist and author of Sing It! Learn English Through Song, what would be the best choice of music for a person with inflammatory illness.3 She said, ‘It can be anything from Mozart and Vivaldi to favorite Broadway tunes, from long-remembered lullabies or Tibetan chants to your favorite song when you were sixteen. The main thing is that it be music the person loves.’
  10. Meditate daily to reinforce and integrate your body’s rhythms. And if you’re ill, use meditation as the platform from which you launch the powerful tool of visualization. When you dance, you put your whole body’s movement into the embrace of something bigger than yourself — the music. When you are fully the captive of the music, you are free to receive its blessing. And every step of the dance is a choice you make to stay with the music.

DYNAMIC DESIGN HOME CINEMA

DYNAMIC DESIGN HOME CINEMA

For furniture, I love the few pieces I have and does not change, but as a blogger we discover daily news, it’s hard not to crack …

Above the living-dining room where Jo Yana chose to paint the main wall in pink – small nod to her favorite designer Karim Rashid … You’ll also notice the suspension ATOMIUM in Kundalini the most beautiful effect!

This room also houses the home theater installation conducted by Dynamic Home Cinema. In front of these gorgeous wooden drops are pregnant Y21.2 Audio Linear …

At the entrance, a picture of Miles Aldridge sets the tone of the apartment, and FIDELIO Philips broadcasts Playlist place … On the side of the dining room, chairs LOUIS GHOST EROS and greet guests.

The main hall lit by the luminaire BLOB M Karim Rashid …

The cuisine is inspired by Parisian apartment signed Périchon we mention above, because the walls and ceiling were painted in gray have to emphasize the white lacquered furniture. Yellow light under the bar and a nice bin Brabantia bring the strand of color …

We love the headboard PARROT signed by photographer Solve Sundsbo …

The workspace of blogger … A reading area with ottoman LEBLON DELIENNE-QUAD and library. An office signed K-DESIGN, and the now famous chair VERTEX signed Karim Rashid.

DYNAMIC DESIGN HOME CINEMA

DYNAMIC DESIGN HOME CINEMA

Preparing for a Paperless Year!

I am in full-blown pre-planning mode. We officially reported back to school on Thursday, and I’ll have 27 fourth grade students in my classroom on August 1. It’s crazy to think about how fast this summer has gone and how much work is still ahead.

This will be the first year that I will attempt to go paperless from day 1. Last year, we only had 1:1 iPads for the last 6 weeks of school, so it was after we had established many of our routines and procedures for the year. As I prepare for this shift, I’m linking up with the Tune into Technology linky to share my plans for management and organization.

Managing the Students

1. Number the technology
I assign students numbers 1-27 on the first day of school. We use these numbers for everything — mailboxes, book bins, lining up, etc. We’ll also use them for the iPads. Each student will be assigned the iPad corresponding with their number, so they’ll always know which one to use and which slot to put it back in when we clean up.

2. Build Classroom Norms and Routines
We’ll develop some essential agreements about the iPads before we even get them out. I’ll let the students decide on the rules, with a little extra guidance as necessary. The items that we’ll need to touch on will include:

  • how to get the iPad out of the cart
  • moving around the classroom with the iPad
  • using the iPad appropriately (following directions, etc.)
  • putting the iPad away
You can read my previous posts on this here and here.

3. Develop a common vocabulary for the buttons and gestures, and teach some basic actions.

We’ll talk about the different buttons on the iPad and their functions. We’ll also talk about how they can be used together to take screenshots and quickly navigate from one app to the next. For more information about how I do this, check out my TpT freebie (the very first thing I ever made for TpT!).

4. Give time to explore
The first writing assignment my students will have this year will be to write an informational piece (either descriptive or how-to) about an app of their choosing. By giving them this assignment, I’m giving them time to play around with the iPad and explore the available apps while also getting a baseline writing sample. This has the added benefit of cultivating “experts” about the different apps among the students.

We actually start school on a Thursday this year, and I intend to get all of this started during those first two days.

Organizing Myself

As I prepare for my paperless year, there are a few items I’m working on before the students even arrive. This will help me be ready to go on day #1.

1. Create a stack of Evernote notebooks for all of my students.

I’m planning to keep all of my conferring notes, work samples, and other relevant data in Evernote this year. To prepare for that, I’ve created an Evernote notebook for each student, and I have them clustered together in a “stack” so that all of my homeroom students are together.
Since I anticipate using this system for many years, I’m formatting the notebook names as “2013 – Last name, First name.” That way, I won’t get confused when I’m quickly looking for the notebooks for this year’s students as opposed to last year’s. I’ve also created one additional notebook called “2013-2014 Overview.” Listing both years ensures that the notebook will be on top of my stack when they’re sorted alphabetically, and I’ll use this notebook to keep track of notes and documents that pertain to the whole class. 
You can read more about setting up Evernote notebooks in my paperless series.
2. Create a checklist template for my class.

This will also be done in Evernote.

I like to have a checklist of my class roster available whenever I’m collecting forms or tracking important information. I’ll make a blank checklist now, and then I can copy and paste it into future notes as needed. This is a huge time-saver down the road for me.

3. Make sure that my Dropbox folders are set up for distributing student work.


Although there are plenty of learning management systems available, I strongly prefer Dropbox for distributing assignments to students just because it’s so easy on my end. All I had to do was create a folder titled “Student Assignments.”

Once the daily folders are set up within the Student Assignments folder, I can share all of the folders through a link on my class website, and students can easily access everything they’ll need for daily assignments. To read a complete step-by-step tutorial for how to do this, check out my previous post.

Since I set this up at the end of last year, all I needed to do was empty out the assignments I gave to last year’s class so that I can start fresh this year.

4. Create a class on Class Dojo.


Class Dojo is an excellent online classroom management app that I’ll be utilizing more this year. I’ll tell you more about how I’m integrating it with my classroom economy in a future post, but for now, all I need to do is input my student roster and print out home access codes for my students and their parents. Then it will be all set to go.

5. Create a new group on Edmodo and prepare a welcome message.

(Edmodo has totally changed its app icon, btw. Check it out!)

I’ll be using Edmodo to collect student assignments, give quizzes, conduct class discussions, and take polls. I’ll need to have a group code ready to give students for the first day so they can sign up, and I’ll want them to have something to see and do immediately when they log in for the first time.

****
Once I finish these 5 steps, I think I’ll be ready to start the year. I have to admit, I find prepping for a paperless classroom far easier than what I experienced in the past. I’m looking forward to going on this journey with my students this year, and I can’t wait to share all of the learning we’ll have in store for us. It’s going to be a fantastic school year!

Can’t wait to read about how others are organizing and managing technology in their classrooms. Be sure to check out the other posts in the Tune into Technology linky, and have a great week!

Knoxville News Sentinel featuring Kurt and April Nitzsche

Knoxville News Sentinel featured WORKOUT ANYTIME owners Kurt and April Nitzsche.
The online article includes a great picture of April showing one of her clients, how to use one of many exercise machines at the Maryville location. The story also ran in the print edition on the front page of the business section with a large two picture spread of Kurt and April.
April Nitzsche explains to Robert Ridenour how to use one of many exercise machines at the Workout Anytime in Maryville on Thursday, January 16, 2014. April and her husband Kurt Nitzsche are the franchise owners of the Workout Anytime in Bearden and are now expanding into Maryville with their second location.         (SAUL YOUNG/NEWS SENTINEL)
You can view the online article here. 

EXOTIC CONCEPT HOME FULL COLOR VERY JUOOOOZZZZZZ

Have you ever seen life, both in the apartment before? Usually, when it comes to so many colors, we have to overcome the enormous risk of visual confusion room. However, in this situation, it seems that everything is in place and atmosphere that inspired this apartment is the energy and extreme informality. Especially designed for young working couples, this house is a fusion of passions and interests. As their styles are very different and they wanted some of their own furniture to integrate into their new home, things were very difficult for designers.

EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

EXOTIC KITCHEN CONCEPT HOME FULL COLOR

EXOTIC KITCHEN CONCEPT HOME FULL COLOR

EXOTIC BATHROOM CONCEPT HOME FULL COLOR

EXOTIC BATHROOM CONCEPT HOME FULL COLOR

EXOTIC BEDROOM CONCEPT HOME FULL COLOR

EXOTIC BEDROOM CONCEPT HOME FULL COLOR

The 2017 Extra Life 24-Hour Gaming Marathon, In Support of The Children’s Miracle Network Hospitals [Post Updated All Weekend]

Wow, it’s that time again – time to try to play some games for a cause – in my case, I play as much as I can through the weekend for the Alberta Children’s Hospital Foundation (as I was born and raised in the province of Alberta, Canada).

This year actually ‘sprung up’ on me, as I haven’t been feeling well these past few weeks… I have had a bit of a fever [38C/100F+]  the entire time and have been extra sore and slow (I say ‘extra’ as I myself have a condition, called Myalgic Encephalomyelitis – which is basically an infection of the brain and spine that causes Fibromyalgia and Chronic Fatigue symptoms (pain and tiredness, respectively) – a condition I have had for 12 years now [wow it’s been that long]). So, playing for this charity every year is special to me and something I have tried to do every since I heard of Extra Life back in 2015.

Image Link to The Extra Life main website, where you can see all of the other wonderful people participating in this event, many of them streaming their marathon Live on Twitch and other streaming sites! (Link opens in a new window)

Due to my own illness then, I cannot play 24 hours straight through, but I count my gaming hours Playing For The Kids™ over the entire weekend of the event (in this years’ case, Saturday November 4th and Sunday November 5th), hopefully tallying 24 hours in total.. (in the case that I am not ‘up to it’ for that long, I allow myself to count my wife’s gaming time, as she generously tries to play beside me and add hours, for a “Total Household Hours” amount). [I always hope that in the spirit of the event and the intention, that my dear readers and those at Extra Life find this acceptable]

As has occurred in past years, I do not have the ability/energy to set up and maintain a constant Stream of some sort yet (through Twitch, YouTube and other streaming services); but what I do is I share some details and Screenshots (and Videos if I can) of what I am able to play, here at The Blog, in an ongoing and updated post – one that I will be adding to as the weekend progresses (including Sunday Night), right here!

So, follow along with me as I Play For The Kids™ all weekend, updating this very post as I go – and if you wish to take part, you can Pledge/Donate directly to the Extra Life charity via the Logo/Image just below or through this link for 2017: https://www.extra-life.org/participant/247989 – and whether you pledge anything or not, feel free to just return to this posting for gameplay time Updates, Screenshots, some Video Clips from the weekend – and more!

See You In The Game!

Update, Saturday 12:30PM MST: Beginning The Marathon, with the initial post above and gathering snacks and drinks to start Playing For The Kids™!

Update, Saturday 7:30 PM MST: As usual with this event, I always try to play some good’ol Minecraft Hardcore Mode (you only get one life!), to see how far I can get during the marathon.

Usually, I don’t get too far and starting out this year was no exception. I spawned in a new Hardcore world – in a wintery biome which I found out later was “Cold Taiga” – which meant, although there were plenty of Trees for Wood to use, there were no seeds to find and plant right away for food, there were no large hills in sight (for easy access to Stone and Coal to cook any foods I might come across) except in the far distance – and as night fell, I died right away to a band of two skeletons and a zombie that came out from behind one of the many, many trees…. Wow what a harsh start!

I began another Hardcore world, hoping to spawn in a relatively easier biome – and I did… I quickly collected Seeds from the Grass around me and began a Garden to grow Wheat RIGHT AWAY, heh. I had to cull some of the many Pigs I found around me in order to eat, planning on replenishing their numbers later on. I then carved out a little Mud Hut in the hillside nearby and settled in for the night…

Updates on that World as I play more – but for now I have to stop and take another break. More to come!

Total Gameplay Time: ~2.0 hrs

Update, Sunday 10:30 AM MST: I played last night right up until I fell asleep, starting a “Just One Life™” character in Fallout 4 (where I stop playing and delete that character upon dying just once), and was popping into various games for short periods of time, like Marvel Heroes (which has Daily Login Rewards, with small ‘gifts’ every few days you enter the game – and a Free Hero available at the no doubt-difficult-to-get-to, Day 300) [Even if I do not have the energy to play for a while, I try to pop in to register a login, heh – to see how far I can go].

I also popped into The Elder Scrolls: Legends, a Virtual Collectible Card Game based on The Elder Scrolls series [a good game for slow-paced-yet-still-kinda-flashy-and-enjoyable gameplay that you can play against the CPU/AI only, if you desire to]. I also ran a few Benchmarks and did a few quick driving tests in Grand Theft Auto V, trying out some settings I saw in YouTube videos online (to see if I get the same framerate with the same hardware) – but I felt a bit weird at the concept of playing GTA games for this Event [shouldn’t I be playing games kids would play, or at least Family-Friendly games? lol], so I didn’t stay in Los Santos very long.
Today, I plan on playing as much as I can, continuing my Minecraft: Hardcore Mode world, and my Fallout 4 “Just One Life™” character, along with some Elder Scrolls Online gameplay, hoping to get up to 24 hours in Total. I’ll also post more Screenshots next Update. Here I go!
Total Gameplay Time: ~ 5.0 hrs


Update, Monday 9:30 AM MST: Well I played as much as I could… 
In Minecraft, I continued my Hardcore Mode world (actually Marathon 2017 World 2.0, as I died without even leaving the first Biome in the first one (above)), making a nice Garden along the shore of a River nearby…
When night fell upon the world, since I was out on a ‘walkabout’, looking around the Biome, I quickly dug into the nearest hill, making myself a small mudhut house to Craft and Cook in… I should have maybe stayed in it all night, but I thought I would get started on collecting more Food, by killing a few Spiders and using their silk to make String, crafting a Fishing Pole.. And what happened? Two Skeletons came out from behind a tree and as I ran back toward my little ‘second mud hut’, they cornered me and filled me full of arrows, as I weakly flailed my Rock Sword back and forth… I hope my ‘Deeds Will Be Remembered’ [hehe Diablo2]
To make myself feel better, I popped in an out of a few games for the next few hours… I tried out Need for Speed: Most Wanted, which seemed like an open-world racing game, with good graphics.
Playing that game reminded me of a ‘test’ I wanted to do (I love running Benchmarks and Tests, heh) with Grand Theft Auto Five (GTAV), where I saw a video of someone running it on High Settings, to test out the differences between how it performed on two different CPUs (Processors, referring to the ‘main engines’ of a computer). So I started up GTAV and ran the Benchmark (to see if I got similar results) and drove around the city a bit.
While the game looked good, I felt a little weird playing such a ‘mature’ game during a Marathon for children’s charities [lol shouldn’t I be playing ‘family friendly games’? or does it matter?], so I just took a few Screenshots (of course), and then left it for now, for something else.

The Beta for Paladins, a MOBA-slash-FPS game by the makers of Tribes:Ascend and Smite, was going on, so I popped into that game, going through the Training and playing for a while afterward.


Total Gameplay Time: ~ 10.0 hrs

Alas, just like before, I couldn’t quite make the 24 Hours on my own… My own illness [where I am sore a lot and get tired easily] keeps me from playing for very long at one time. However, as I stated earlier, what I like to do, is include the game playing time that My Better Half does alongside me, as part of a “Household Total”… If I include her generous contribution, the new total becomes:

Total Household Time: ~23.0 hrs


Haha – even with her inclusion, I did not ‘quite’ make the 24 Hours in total… But, as stated above, I hope that in the spirit of the Marathon and its’ intention – and mine – I hope that what did accrue would be acceptable… In fact; I do not think that ‘total game time’ is the main goal of this Marathon… This time is perhaps to literally ‘take time’, to think about those that are much more unfortunate than us, and in the case of this Charity, much younger than most of us… During this Day or Weekend, whichever it is, I think, we remember those out there, those that are in need. In this spirit/state-of-mind; I thank you Dear Reader, for following along in this small adventure. Whether you donated at all or not, I hope that you played a little bit of some game, took a little bit of time, to think about those that are in much more pain and need than most of us are. And I thank you for following me on this small journey. Take care, my unmet friend – and perhaps See You In The Game.

Personal Log: Might not be able to post for a bit longer still… [Editorial/Personal]


Personal Log, Stardate 20160901 [I have no idea how that works heh]

Just a quick Personal Note to say that I apologize to my dear readers for not posting anything for a while, and that I may not be able to post for a while longer yet… I have been experiencing a worsening of my ongoing symptoms… I may be okay in about week or so and finish up some Project irons I have in the fire; but I don’t know, it may take longer than that to get back up to the point where I can play and finish testing some recording programs I was working on, and post about it all…

< Potentially Sad Talking About Sicknesses Follows, In Case Of Feels, Stop Reading, Play Game >
I’ve never really mentioned what I have or what I go through before, since starting this Blog five years ago.. I didn’t really want to trouble people or put those thoughts/feelings on them, but I have had a few people ask me personally what it was – and I was looking something up recently about my condition (it’s a condition I (and Doctors as well) are constantly having to learn about) and I read quite a bit about other similar stories, where other suffers were in much worse condition than me… They were literally bed-ridden… And while I was also like that for the first couple of years, I have improved slowly over time to the point where I can sit up, and sometimes even play games, and on good days work on an article and do things around the house… 
My condition is Myalgic Encephalomyelitis, which is an infection of the brain and spinal column, which gives components of Chronic Fatigue (getting tired easily with a slow recovery rate (as in days) if I go to the store, etc) and Fibromyalgia (inflammation and pain in all areas of the body, like when you get a ‘flu’ and are sore all over? it’s that, all the time…heck, many of your Aunts or Mothers may have Fibromyalgia, so you may have heard about it..). It is not a well-known disorder, despite millions of Americans having it.

Every year I learn something new about it or studies that found out something new about it; but nothing is ever concrete on ‘how to get rid of it’, unfortunately. The only good part about that is, is that all Doctors have concluded that it is “something that goes away on it’s own, but noone knows when”… Some people have it for a year or so and some have it the remainder of their lives. I am in my 10th year now, but as I have said in the past, I try to always see the positive in things and I have been slowly improving overall, slowly over the years…

I don’t want to make anyone feel sad, I am sorry if this information does… I merely wanted to inform my readers that I may not be able to post things I have been working on for a while longer… Some of the things I was working on are: GPU-Accelerated Game Recorder Comparisons (Playclaw, Bandicam, Mirillis Action, D3Dgear, and more), First Impressions of some games that I started work on already (The Elder Scrolls Legends Closed Beta, Dropzone Closed Beta, A Return To The Elder Scrolls Online (I was in the Beta for it) and others), bringing back the “Can You Guess Where The Screenshot Below Is From” (there have been no winners so far and I have some Giftable Games a-waiting on Steam and GamersGate) and even more projects that I don’t want to mention yet – to keep them a ‘surprise’, heh).

I enjoy writing my articles and posts here, helping others with the information I have figured out, found or collected, doing testing, giving tips of games and even Video Editing and showing effects of settings in both, including also creating the Headers and graphics utilized here (they are all done by me)…
I plan to continue doing this for a long time to come… I just realized there has not been much the past little while and wanted to let you all know there may not be some yet for just a little bit longer (‘recovering’ from a Cold or “doing too much” takes about a week or more each time I do something or get a cold, to get back to where I was, with this illness, everything takes far longer..).
Thank you for your patience, my wonderful readers, and I hope that I can contribute helpful information again for you, in the near future.

Sincerely,

~Troy from The Game Tips And More Blog

Quick Tip: Heroes Of The Storm 2.0 – Where To Choose Skins, Mounts, Announcers And More [Interface Change]

Yesterday, Heroes Of The Storm “Version 2.0” came out – and along with it a bunch of changes and additions, breathing some new air into Blizzard’s MOBA entry. I have been having fun playing it off and on, discovering the changes and new progression system. I am working on a First Impressions/Overview of ‘2.0’ – but before that, I wanted to quickly make a Tip about something I am seeing a lot in the General Chat in HOTS: people asking how to change the Announcers, Mounts, Skins and other new additions, as the new UI has changed things a bit…

In 2.0, right away you will see that things have changed, as the Main Menus themselves have moved around and information is in different places. For example, the Shop link/text at the top of the screen is gone:

Here is where the Skins, Mounts, Announcers, etc can be located now:

The Loadout button (first one on the bottom, far left) has combined the “Heroes” and “Mounts” buttons and now holds all of the settings for the currently selected Hero. Here, you can choose the Skin, Mount, Announcer used and other new additions via the sections within the Loadout (you can even save Presets of combinations you like). 

Here is a 60-second tutorial showing where it all is, in Heroes Of The Storm 2.0:




That’s it for this Quick Tip – it was just something fast because I have seen it asked a lot in the General Chat lobby lately – have fun in Heroes 2.0!


In One Sentence™ – Heroes Of The Storm – Hero Overviews [Very Short Reviews Of Each, Currently Text-Only]

[In light of the recent ‘Heroes Of The Storm 2.0’ release – even though this was a ‘work in progress’ since I started playing ‘Heroes’ again a bit ago and it is not fully compiled yet – I wanted to get this hopefully-slightly-helpful information up right away for everyone… So here it is – being added to as I complete it but without any Screenshots yet – I am collecting some together and plan to place them in-line within …Soon™]


Update: Last Added – Arthas on 2017.05.04



In One Sentence™


A Heroes Of The Storm

Hero Thingy Overview  


By: The Game Tips And More Blog


Presented in Alphabetical Order, in a Document-sorta-but-not-really format



[Initially, was invited to the Heroes Of The Storm Beta; but was not able to play much at the time and so I didn’t write about it much back then. I did work on a few articles, such as this one, adding to it the bit that I did play. Only recently (before I knew about “Heroes Of The Storm 2.0”) I got back into this fun game, tallying up my own opinions and favourites, of each and every hero in the game. Seeing “Version 2.0” come along, I felt that, even though I have not fully compiled every singly hero yet, I wanted to share what I did have done, so that everyone – and especially newcomers to the game – could get a quick idea of each Hero and how they played in the game, helping them make a choice as to which one to try. I will be returning to this post and adding more Heroes as I play them… I hope you enjoy these little snippets of info for each one – and See You In The Game!]




Rating Key (if applicable to Hero, when used):

* = Heroes I ‘Liked’ (fit my personal playstyle(s), or is unique in some way)

** = Heroes that are A Personal Favourite (I myself would play often or ‘mainly’ would use (may not match your individual preferences dear reader, this is just a Personal Rating of mine))






Auriel = Finding myself playing more offensively than defensively with this Hero, I enjoyed her AOE and healing capabilities.
Alarak = With skills focusing on mainly attacking Heroes, in the right hands this high-damage-potential Assassin could be quite deadly.

Artanis * = Another Hero with skills focused on killing other Heroes, Artanis comes with high damage output potential – and although I was left feeling oddly ‘limited’ playing him, Artanis was fun to play overall.

Arthas = A mobile tank – big, tough, but a little slow [in my opinion] – with some light healing (and the possibility to heal yourself) and some nice offensive moves as well, Arthas can become quite competent in The Nexus.

Azmodan ** = This large and lumbering behemoth is capable of dealing out huge damage as a “Ranged Specialist” – just be careful as you have fun creating your own armies on the way to dish it out on the enemies’ base, as you are also a ‘heavy target’, so to speak. A Personal Favourite.

Dehaka * = With deceptively simple gameplay [or is that ‘deceptively difficult’?], high damage output potential – and with the ability to ‘tunnel to any bushes on the map’ instead of a mount [with a cooldown], this Hero has some nice unique gameplay to fiddle around with in The Nexus.

Diablo = Huge and tough – as he should be – with some care taken and strategy used, this “Melee Warrior” will be a force to be reckoned with.

E.T.C. * = With strong yet simpler gameplay, ETC and his unique ‘rocker’ attitude is a fun handful of Tauren to Melee with.

Gazlowe ** = With the ability to plop down temporary turrets and shoot what eventually becomes HUGE DETH LAZORZ – not to mention being able to recover Scrap Parts for mana – Gazlowe The Goblin Engineer, though more complicated than many Heroes, was a joy to play and kill with. A Personal Favourite.

Jaina * = With straightforward damage and easy gameplay, Jaina The Mage is fun to use and fun to take out other Heroes with …if mages only had Unlimited Mana [in any game]…

Johanna = Johanna The Paladin is a little more difficult than most melee Heroes – she is far more offensive than defensive as I first thought she might be – with many life-saving capabilities, in the right hands she could be quite a formidable Hero to run with.

Leoric * = With the unique ability to ‘remain undead’ and re-spawn wherever you desire after a time, along with simple melee gameplay, this Hero was neat to play – in the right hands perhaps this one could do a lot of damage in The Nexus.

Lunara = With mainly indirect damage (DOT or Damage Over Time), this Hero was difficult to gauge; with the ability to always move faster than most Heroes (not needing a Mount) and her ranged attacks, perhaps in the right hands she could be quite effective.

Malfurion** = A multi-faceted Support Hero with both healing and offensive capabilities, if you like to play Support in other games (such as an Engineer, or Medic/Cleric), this ambidextrous Hero should be fun for you to play in The Nexus. A Personal Favourite.

Probius * = If I had to sum up Probius I would say words like ‘difficulter’ (because I say that’s a real word now) …and ‘cool’ …and ‘overpowered’ …and ‘work’ …and ‘cute’ …and ‘fun’ …and…other words like that with ellipsis between them.

Raynor = With simpler gameplay and the ability to buff any allies around you – along with the possibility of some light self-healing – Rayor the “Ranged Assassin” is a helpful addition to play in The Nexus.

Rexxar ** = If you’ve ever wanted to handle two Heroes at once, now you can with this ‘hunter-pet’ combination which promises good damage output and a lot of fun – if at a slight cost of easier gameplay. A Personal Favourite.

Samuro ** = If you like to be stealthy, confusing opponents and striking from the shadows, this is a fun Hero to do all that and more with. A Personal Favourite.

Sgt. Hammer ** = This spunky Ranged Hero in a Siege Tank has huge long-range capability – if she can be handled with caring hands. A Personal Favourite.

Sylvanas * = Capable of not only high damage but also ‘converting’ mercenary units to your side, this “Ranged Specialist” also has sleek gameplay and a powerful (translation: annoying to other people) Mind Control ability.

Thrall ** = Fast melee and a bit of spellcasting – along with being easier to play – makes this Hero a fun brute to run with. A Personal Favourite.

Tychus = With good offensive capability, this Hero is easy to learn and practice with.

Valla ** = With fast and smooth gameplay that is fun and easy to get used to – especially if you have played The Demon Hunter in Diablo III as many of the Demon Hunter ‘basic moves’ come into play in The Arena. A Personal Favourite.

Zul’jin ** = Focusing on Ranged damage and even doing more damage as his health lowers, this Assassin felt like it could take out both Heroes and swaths of mercenaries with ease, thanks to his light self-healing – just don’t get caught surrounded while trying to do the highest damage possible! A Personal Favourite.





Repeat  of top comment: [In light of the recent ‘Heroes Of The Storm 2.0’ release – even though this was a ‘work in progress’ since I started playing ‘Heroes’ again a bit ago and it is not fully compiled yet – I wanted to get this hopefully-slightly-helpful information up right away for everyone… So here it is – being added to as I complete it but without any Screenshots yet – I am collecting some together and plan to place them in-line within …Soon™]

Nutritional Strategies for Allergy and Asthma

SeasSeason allergies to pollen and mold seem to getting more and more prevalent each year with progressively more severe symptoms in sufferers.    Treating allergies with nutrition and nutrition supplements can have big advantages over using medications.   
Allergy medication most commonly comes in the form of Antihistamines, and there are some big problems with long-term use of these medications.     It is now known that prolonged use of antihistamines decreases levels of acetylcholine which is a key neurotransmitter involved in memory and other important functions.   In fact, antihistamine use increases the risk of senility, dementia and Alzheimer’s Disease.
What are Allergies Anyway?
Allergies are abnormal immune reactions to specific agents (proteins) known as antigens/allergens, which include many substances such as foods, drugs, pollens, dust mites, animal danders, feathers, along with many others. 
Allergies may also develop when an otherwise innocent substance has significant contact with an already inflamed surface (known as sensitization).  For example, when sick with a respiratory illness, respiratory surfaces are already inflamed and substances present at this time may be “remembered” as being foreign.  This can also occur with chemical substances known as “haptons” which are combinations of self and non-self which can lead the immune system to attack the self. 
Since there are multiple pro-inflammatory substances involved with allergies it is rare to obtain adequate control with single products/medications.  The most potent chemical mediators in allergies and asthma are leukotrienes.  Some leukotrines are one thousand times more potent than histamine as stimulators of bronchial constriction and allergy. 
Interestingly, many medications that reduce one inflammatory pathway actually boost leukotrienes.    For example, Aspirin and other NSAIDs (Non-Steroidal Anti-Inflammatory Drugs like Ibuprofen) result in the production of excessive levels of leukotrines in sensitive individuals although they decrease prostaglandins associated with inflammation and thereby relive pain.  So long term they can create a much more severe problem.
Asthma is linked to allergies and can be a severe and life threatening condition.   Do NOT try to self-treat Asthma – see a physician!
Strategies for Allergies
Try to avoid allergens by using air filters, regularly cleaning all surfaces and vacuuming and keeping your air-conditioning system on while regularly changing filters to filter out as many allergens as possible.   Remember your car cabin filter as well, and take showers and wash clothes after being outside for long periods of time.
Change your diet to reduce inflammation.    Dramatically reduce your intake of refined carbohydrate – sugar and starch which drive insulin which drives inflammation.  At the same time increase your intake of low glycemic, organic fruits and vegetables such as berries, broccoli, Brussel Sprouts, etc.   These plant foods contain polyphenols which are potent anti-oxidants and help to reduce inflammation and allergies without side effects.
Boos
Increase your intake of Omega 3 Fatty Acidsfrom cold water fish such as Alaskan Wild Salmon and/or take an Omega 3 Supplement such as Krill Oil.    Omega 3 fatty acids will always reduce inflammation if taken in sufficient dosages so this should be a primary strategy for allergy sufferers because they produce many side benefits.   The only exception is people taking any type of medication to thin blood and reduce clotting like Coumadin.   In this case the combination can be dangerous!
Nutritional Supplements for Allergies
There are several highly effective nutrition supplements for allergies including some key herbs.
Local Raw Honey – it MUST be local and must be raw because it will contain small amounts of local pollen and works by getting the body used to pollen much like an allergy shot.     A Tablespoon a day is as much as you need.   Many people swear by this simple and safe remedy!
Stinging Nettle Extract – this herb has a long history of effective use for allergies and freeze dried preparations seem to work the best and are best taken BEFORE allergy season even begins to put a damper on symptoms before they start – this is true of all nutritional approaches to allergy by the way!
Euphrasia Officianalis – aka “Eyebright” is an herb which name says it all – it is highly effective for eye allergy symptoms.
Quercetin – is a flavonoid contained in high amounts in apples, peppers, red wine, dark cherries and berries, tomatoes, cruciferous vegetables such as broccoli, cabbage and sprouts, and raw red onions.   To treat allergies taking supplemental quercetin is the way to go, and the best form of quercetin is contained in a product called “AllQlear” by Integrative Therapeutics and can be purchased on Amazon.     It also contains “ovomucoids” from quail eggs that act as tryptase inhibitor and prevent release of histamine.
Boswellia Extract – Boswellia aka Frankincense (yes the herb mentioned in the bible!) can be highly effective for allergies and other forms of inflammation including arthritis because it blocks the formation of leukotrienes!    To get the benefits you must take 5-loxin which is a specific extract.   Note that in some individuals 5-loxin can cause or excacerbate heart burn so it is not for everyone, but when it works it can be highly effective!
Butterbur Extract – this plant extract can be highly effective for inhibiting leukotrienes and allergy symptoms or side effects.   You need to take a standardized extract with standardized levels of Petasin and Isopetasin) and free of Pyrrolizidine Alkaloids aka PA.  High quality brands include Life Extension, Swanson, and Enzymatic Therapy to name a few.   This product can also help many migraine sufferers and is a well-researched, proven treatment.
NAC – N-Acetyl Cysteine – helps thin mucus naturally and boost levels of the body’s most important antioxidant Glutathione – every allergy sufferer should be taking 600 – 1,200mg per day!
You will also find combination of these ingredients in particular products, and it is worth experimenting a bit because if you find the right product or combination of natural products you can find relief without sedation and without the side effects associated with antihistamines and more potent drugs like steroid nasal sprays or oral steroids.

Fallout 4 – V.A.N.S… What Does It Do? Why Would Anyone Want To Take/Use It? [Explanation with Example]

I saw someone ask this in the Official Steam Forum, wondering why someone would even pick the VANS Perk (the Skill to use it) while levelling. I wanted to come back here and post, as a Quick Tip perhaps, a short explanation on what V.A.N.S. actually does (and how it can be helpful to players).

Briefly summarized, V.A.N.S. is a Perk of Intelligence (requiring only 1 INT to Unlock) that lets the V.A.T.S. interface ‘show you the way’ to your marked objective/quest/mission location. An example I recorded of how it looks, is below:

Recorded aboard The Prydwen, this is a short example of how VANS looks in Fallout 4.
(Reduced size, framerate and quality, to fit Upload requirements at Steam)
Click to see slightly larger Full Size
On Steam, at http://steamcommunity.com/sharedfiles/filedetails/?id=966498722

To use V.A.N.S., simply hold the Hotkey for opening VATS for a short time (eg. on PC, instead of hitting ‘Q’ quickly once, to enter V.A.T.S., hold it down) – let go of the ‘Q’ key, after about two full seconds or so – even if the Pip-Boy has not fully opened yet. Then hit ‘TAB’ to close the Pip-Boy right away, once the ‘green trail’ is seen.
You do not need to move or turn at all, until after closing the Pip-Boy fully (for example, I do not use the mouse at all to use V.A.N.S., on PC, I just open the Pip-Boy with ‘Q’ and close the Pip-Boy with ‘TAB’).
[Perhaps this will help those having issues with opening/closing/viewing the ‘trail’…]

If you’ve played Skyrim, it is similar to the Clairvoyance Spell in that game, as it will then illuminate a ‘trail’ that looks like a tube of smoke along the ground, that you can follow (but in Fallout 4 it is ‘Pip-Boy Green’, as opposed to ‘SKYrim Blue’).

While this doesn’t seem needed as Fallout 4 has both Map Marks (on the Map in the Pip-Boy and at the bottom of the Screen in a Compass) and Floating Markers (that can be seen on Doors, above NPCs, etc). V.A.N.S. is helpful in a slightly different way. It shows you the ‘Main Path to take’ to get to your Marked Objective/Quest/Mission (as in, “go to this Street and use this Road”).

For example, if you are jumping around in the back hills or lost in the skyscrapers of Downtown, it will guide you out of where you are with the ‘green steam trail’ and show you how to get back to the main roads, then it will illuminate which way to go from there, too.

The Map Markers that are normally available only show the ‘overall’ or ‘general’ Heading, like a Compass (N, E, W, S) and not ‘how to go around this thing in front of you’ or ‘how to get back to the main road first’. Those last concepts are where the usefulness in V.A.N.S. shines; in how it can guide you from exactly where you are, first around whatever is in front of you (to the nearest main path), then how to go on from there to your next objective.

Try it out on your next Character perhaps – and have fun in Fallout 4!

Who needs to curb the carbs?

It goes without saying that everyone should consider cutting out refined sugar and flour products, plus high levels of processed foods that are full of junk fats, as they are nutritionally redundant in the human body. You should also consider giving up caffeine and moderating your alcohol intake, particularly if you suffer from any of the symptoms of unstable blood sugar and insulin resistance.

Many people are not even aware of the symptoms of eating too many refined and dense carbohydrates. They have become used to living in what I call ‘the discomfort zone’. They have forgotten what it is like to wake up full of energy, think it’s normal to feel bloated after meals and rely too heavily on stimulants such as coffee to get themselves through the day.

Diet Start

This sorry state of affairs becomes their normal state of being — it is no wonder that the symptoms of degenerative disease creep up on many people un-noticed. They are so used to living below their physical potential that they don’t recognise the signs until it is sometimes too late.

If you are more genetically disposed to gain weight readily when exposed to an unhealthy diet and lifestyle then restricting the amount and type of carbohydrate foods that you eat may be the right choice for you. Such a diet regime may also suit you if you have developed insulin resistance as the result of a diet based on high levels of refined and complex carbohydrates that outweigh your energy requirements, plus too much saturated fat, with little fibre and water. Unless, that is, you are one of those people who leads an active lifestyle or has a high metabolic rate, and already eats a diet with relatively high levels of healthy complex carbohydrates (brown rice, potatoes, wholegrains and certain vegetables, fruit and pulses) without accompanying weight and health problems. If so, why are you reading this? Sounds like you are already doing what is right for your body.

Currently June (?!)

Oh, how I love to start the month with Farley’s Currently over at Oh’ Boy Fourth Gradeespecially when I actually remember that it’s the start of the month and don’t have that revelation about a week in. 🙂

Here we go…

Listening:  I got to see Sara Bareilles perform at a small Atlanta venue on my birthday a couple of weeks ago, and wow – can she ever sing! She’s been in heavy rotation on my playlist ever since.

Loving: The first couple of weeks of summer vacation are always the best because it feels like there’s so much free time ahead. A quick glance at my calendar would remind me that this summer is going to fly by very quickly, but for now, I’m thrilled to have a little breathing room before the hustle and bustle of another school year kicks in.

Thinking: Math is on my mind a lot right now. I’m finishing up my final project for my math endorsement (an algebra unit), and I’m joining multiple book studies about math-related books this summer. My students did very well overall on the year-end standardized tests, but I feel like I’m still scrambling to make sense of the best way to teach the Common Core. I need to figure out something that will allow me to differentiate more without creating oodles of additional work on my end. If anyone has the magic solution, please let me know.

Wanting: We bought a new desktop computer last year, and it was intended to be mostly for my school/blogging/TpT use. That worked for a little while, but my husband has slowly taken it over and claimed it as his. He’s been working crazy hours (he’s an attorney), and his work is often more deadline-oriented than mine, so I’ve given in. But now that I’m getting ready to start my doctorate, it might be time for us to give up on the idea of sharing a computer. I have a work laptop that I use sometimes, but it’s got some crazy restrictions/configurations that limit the programs I can install, etc. For most people, it’s not a big deal, but when you’re a tech-geek like me, it’s frustrating. So last week, I made a big pitch for me to get a new iMac desktop, and he agreed! There were some intense negotiations that went into the process, but in the end, we made a deal that we can both live with. I’m going to be responsible for generating the extra income to make the payments on it (we got it financed over 18 months), but between some tutoring jobs I’m taking and TeachersPayTeachers, I think I’ll be able to swing it.

Now I just need to hold on for Monday when my precious new toy will arrive!

Needing: I need to get organized and prioritize what I need to accomplish this summer because there’s no world in which I’ll have time to tackle my ever-growing to-do list. I need to create some realistic goals with deadlines to keep myself reasonably on-task. I also need to cut out distractions like randomly checking Facebook or email or Twitter every 10 minutes.

3 Vacay Essentials – 1) Shade – I have the misfortune of being allergic to almost every type of sunscreen that exists — including the ones that say they’re hypoallergenic and made for sensitive skin. Put some of that sauce on me and stick me in the sun, and my body breaks out in a terrible, lobster-like swollen rash that is WAY worse than any sunburn I’ve ever had. So I stick to the shade as much as I can, and I visit my dermatologist every year to make sure that I’m not getting skin cancer. Not fun, I tell you.

2) Books – This used to be a huge ordeal before the advent of the Kindle. I like having lots of summer reading options, ya know?

3) Beverages – Hydration is important! And there’s a whole slew of summer drinks that I could put on the list… But seriously, I’ve been drinking at least 64 oz of water each day of this vacation before I even touch anything else, so I think I’m doing well.

Big thanks to Farley for continuing to host this linky. Every month I find so many amazing blogs and learn lots about my fellow bloggers. If you aren’t participating already, you should definitely link up!

,
Have a great June, everyone!

Fallout 4 – “Starting Out: On Settlements, Building, Crafting, Materials And More” – A Beginner’s Guide of Tips and Concepts to Settlement Building and Development [UNDER CONSTRUCTION]

Update: Added images for Main Concepts sections (Food, Defense, etc)
Update: Added steps for How To Assign a Settler to a Work Station/Shop/etc
Update: Added how to Give Yourself Any Building Components, or Food, with Commands (Cheats Section)
Update: Added how to Build past the Size Limit in Settlements (Not a Cheat, Doable on Console as well as PC)

[Note.: This post is ‘LIVE’ and ‘UNDER CONSTRUCTION’, as I continue to add more data and Tips and Example Screenshots to it… I decided to make it available now however, to assist those playing Fallout 4; especially those just starting out – seeing as there is a Steam Sale on now (go get it! heh). I will be adding more Text and Tips and Screenshots and More and this post cannot be considered ‘finalized’ until after I add a ‘Final Footer Image’ to the posting (see some of my other posts for examples of this type of ‘end image’ I put in my posts). Please excuse changes as they occur and temporary mistakes and spelling errors, which may show up should you return to this article while it is under development. Enjoy, however – I hope you find something helpful to you – and have fun in Fallout 4!]




I have been having a ton of fun playing Fallout 4 lately… and while I am taking forever to finish up a ‘First Impressions’ of the game [I keep playing and building up my Settlements instead of writing!], I wanted to share some Tips on handling Settlements; some concepts and ideas that might help new users to the game, players that may not have developed their Settlements very much yet, or players that are looking for ways to possibly improve or increase their Settlements and their Production and associated benefits (Bottlecaps income from Stores, Settlers roaming around and finding/providing you with Supplies, Clinics for healing and removing Radiation, and more).

Screenshot showing the Workshop Area of The Sunshine Tidings Cooperative, Decorated (Work In Progress).
(High Resolution Texture Pack enabled [not 100% sure, sorry, but I think it was at this time]
The Automatron DLC Robot Workbench can be seen, center background. Minuteman Flag seen, left wall, foreground)
Click to see Full Size

[Settlements and their development and growth is one of my favourite aspects of the game, not only because it supplies you with Junk/Scrap/Materials to build with and Money as well, but also because of the ‘life it breathes into the game’… every Settlement becomes ‘alive’ with people coming and going, working and resting, asking for help or talking amongst themselves around you. After getting a few Settlements set up and running smoothly, they become a place to restock, sell and collect, modify and improve gear, rest and maybe enjoy some scenery, taking a break from the action by building and re-working, improving and creating a place of solitude and pride, in each little ‘town’ in The Commonwealth…]

Example of the Workshop Mode interface bar, normally seen at the top of the screen in Workshop Mode (Building mode)
Click to see Full Size 

Here then, are some main ideas to start off with or to keep in mind  – hopefully helpful to fellow gamers who are either starting out in Fallout 4 [from the latest Steam Sale], or are looking for ways to improve their currently-undeveloped Settlements (colour-coded somewhat-by-importance to help separate them for easier reference):

1.  In the very beginning, build Food and Water and Beds, as much as you can.  

These three things (Beds, Water, Food) are the main limiting factors to how many people will come to live in a Settlement. 

 [The maximum amount of people that can ‘live in your town’ is supposed to be your Charisma+10 (so if you have 5 Charisma, that would be 15 people); Provisioners who run Supply Lines (more on them later on down further) don’t seem to count towards this calcuated total (by my experience so far). Also, this limitation is stated in many places online – however, I have Settlements that are much higher than this number (over 30!) so I have not finalized the concept of Settlement Limitation Amount, at this time] 

Don’t worry about Guard Posts and Turrets, at least, as much as you might think at the start – because although they do help with the overall safety of your Settlement; reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in the Raids, and setting a higher Security rating (which seems to affect Happiness, but not Immigration rate – more on Happiness later on…) – you can actually put the responsibility on yourself to take care of Raids at first [and get the bonus experience and loot that comes with it!] by Fast Travelling to the Settlements as soon as you see the ‘Help Defend’ tasks come up – or making ’rounds’ between your Settlements as they are starting up, as Raiders sometimes attack while you are there and you can then help clear them out – and get all the Loot they drop, too! 

[The game leads you towards building Turrets at your Settlements near the beginning, too – in the form of a ‘tutorial’ of sorts, somewhat-early on]


2.  Plant any Food (Corn, Tatos, Mutfruit, Gourds, Watermelon and Razorgrain) you find, at first.

Starting out, you want to maximize your growth, so re-planting food you pick up not only increases how much food a Settlement can produce/feed for the Settlers, it also multiplies how much you can harvest!

You can harvest any plants by ‘picking them’ (hitting the Action key while close to them). You can then immediately re-plant the food you just picked, by entering Workshop Mode and going to the Resources>Food section.

A while later, you can start to Cook with your Food – not only do the meals you prepare have special bonuses (they are all different!) but boiling up some VEGETABLE STARCH, made from all materials that you can gather at any Settlement, is a great way to create your own Adhesive building material. Used for almost everything, Adhesive is a very important material to have!



Vegetable Starch, a source of Adhesive, you can create yourself by cooking together Corn (3), Mutfruit (3), Tatos (3) and using Purified Water (1). Purified Water, you can either find as you travel, cook yourself [3 Dirty Water can be boiled up to make 1 Purified Water], or use Water leftover from your Water Sources in your Settlement – as any extra Water that is not used by your Settlers will be ‘kept by the Settlers in the Workshop inventory’ [in the Workshop Bench]. You need Adhesive for Modifications to Weapons and Armor and even for Building – it is used for almost everything and is therefore very important to keep stocked!




3. Tied for the third most important thing/things to start thinking about, are these two concepts:

    • As you can, increase your Turrets and Guard Posts, to increase the Security of the Settlements, and as stated above, reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in Raids, and keeping your Settlers ‘feeling secure and more relaxed’ (Happier), too. 

    Although the Security Rating of a Settlement (“Defense”) does not effect the speed at which Settlers will immigrate to your little town, the Defense Rating of a Settlement affects the Happiness Rating – which affects how ‘Productive’ the Settlers are in that Settlement (speed of gathering resources, amount of Caps earned, etc) – more on Happiness later on…

    If you have more Guard Posts than you have assigned Guards, they will ‘patrol’ around the Settlement, going between them, back and forth. If you have the same amount of Guard Posts to Guards, they will each stay at one, standing ‘on guard’, most of the time.

    [I personally like to have a couple extra Guard Posts created in my Settlements just to have the Guards move around more… It creates more movement in the Settlements overall and makes them ‘feel more alive’ – something I really like in my Settlements!]

    • Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, “automatically” for you to then use!

    Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time – they will even ‘break down’ the items at the Scavenging Station – and you can watch them do it! 

    [If you have the Automatron DLC/Expansion, you will find that robots Assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

    ‘How do you Assign Settlers to Scavenging Stations?’
    Further down, there are Steps with Screenshots for each,
    in the Section “How To Assign Settlers To Work Stations”


    After a while, with more Settlers coming in (sometimes they will migrate to your Settlements quite fast, seeing a solid place to find food, water, beds and have some security/safety), you’ll start to see Junk/Scrap/Materials pile up slowly, even Bottlecaps flowing in, sitting there waiting for you in the Workshops of your Settlements. 

     [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

    Don’t forget to ‘make your rounds’ and periodically travel around to check all of the Workshops, grabbing these extra ‘Caps and ‘Mats, snatching-up the extra Purified Water you’ll see in them, to sell for even more Bottlecaps (especially if you are more desperate for money sometime). Purified Water is created by extra Water production of the Settlement; water that the Settlers aren’t using from the Sources you have set up. This extra Water gets placed in the Workshop for general use and Supply Line provisioning to other Settlements – but since it sells for a decent price and ‘piles up for free’, grab it and Sell it, if you really need ‘Caps!



    4.  As you find more Settlements, start up Supply Lines between them all…

    Supply Lines are ways to ‘share’ the resources of the Workshops between Settlements. You assign a Settler to create a Supply Line between two Settlements, and they then become a “Provisioner”, leading a Caravan between the two Settlements, taking supplies between them so that you can effectively ‘use the Junk/Scrap/Materials/Components of both of them’, no matter which one you are in!

    Supply Lines are started by entering Workshop Mode, then going up to a Settler (one that is Unassigned with no ‘job to do’, or one that you want to make run a Supply Line instead of the job they are currently assigned to) and choosing Supply Line from the bottom menu bar.

    That townsperson will then become a Provisioner, leading a caravan and a wacky Brahmin through the wilds of The Commonwealth… between the Settlement that they originated in and the one that you assigned them to make a Supply Line to.
    Between these two Settlements then, you can utilize any* Junk/Scrap/Components between them, in their Workshops.

    *Note that it appears you cannot share any Weapons or Apparel that you put in [I have not tested Miscellaneous items yet]; you can only share Junk [as of the time of this posting, this may change in a future Update/Patch in the game, of course].

    Requirement: Supply Lines require the Local Leader Perk to be able to ‘organize the people’, which requires a Charisma of 6 – but it has no Level requirement, so you can get it at the start of the game if your Character has a Charisma of 6. If your Character does not have a Charisma of 6, you can also put Perk Points into Charisma as you Level – you get one Perk Point every time you gain a Level – thereby slowly increasing your Charisma to 6, eventually. You can also put on Gear and Clothes that ‘accentuate your Charisma rating’ [eg. Apparel that says “CHR 1”], to get your Charisma up to 6 ‘instantly’!

    [With places like Tenpines Bluff, a Settlement you find somewhat-early on, that has barely any resources at all and barely anything to Scrap for Building Materials – the game seems to even be encouraging you to think about Supply Lines… at least, this is my interpretation..]

    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!


    Workshops will create Scrap building materials (Components) for you ‘automatically’ from any Junk Items you store in them – just ‘keep building’ and if you have the Junk that can be broken down into the Components you need, it will do it for you!



    What I mean by the above Tip is, if you put in a bunch of Forks and Knives you have found (for example), and you want to build something in your Settlement that requires Steel to build with, just go ahead and start Building – your Workshop will ‘smelt/breakdown the Junk items (in this example, the Forks and Knives) into Steel’ automatically, so you can essentially ‘use the Fork and Knife to build with’ – you do not need to “drop the items on the ground and then go into Workshop Mode and Scrap the items one by one” to get the Materials from your Junk items to Build; just select your part to Build and it will let you build it – if there is enough “components from junk parts” to do so!

    [I’m not sure if this changed from an early Patch or something, but I see a bunch of people asking in forums, even recently, if there is an easier way to get Scrap (building materials) from Junk items besides manually ‘Scrapping them one-by-one on the ground in Workshop Mode’ – there should have been a better Tutorial for this, in a way, in the game itself; but I hope this information above clears it up and helps people out]

    Remember: 
    Junk Items = Scrap Components = 
    Building Materials!


    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!
    • Repeated, Scavenging Station concept from above, as a Reminder:

      Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, ‘automatically’ for you!

    Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time.

     [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

    [If you have the Automatron DLC/Expansion, you will find that robots assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

    How To Assign Settlers To Work Stations (To Get Them To Perform Jobs In Your Settlement, Such As Running Shops/Stores Or Gathering Items For You To Use)

    Below, are the five simple steps to Assigning a Settler to any Work Station, getting them to utilize it and start contributing to the income of Supplies/Income of the Settlement. In this example, we are going to Assign a Settler to a Scavenging Station:

    1. When you first build/place a Station or Store/Shop or other useable buildings in your Settlement, it will show up as “Unassigned”, in the Workshop Mode interface. All buildings that are Assignable in a Settlement will show a ‘person icon’, in Red, to show that the building has a Requirement that needs to be fulfilled, for it to begin functioning.

    2. Find a Settler that you want to Assign to the Station. This can be a Settler that is already “Assigned” to something (so you can change their Job they are Performing in your Settlement), or a Settler who is “Unassigned” (doing nothing specific). Highlight the Settler by looking directly at them, then press the ACTION button to begin to ‘COMMAND them to do something’…

    Settlers who are Unassigned still gather Junk Items they find while walking around and put them in the Workshop Inventory for use by everyone. However, this happens slower than if they were Assigned to a Scavenging Station (which gives them ‘access to tools’). “Unassigned Settlers” contribute to ‘making people feel uneasy’ in the Settlement – which negatively affects the overall Happiness of that Settlement (resulting in lowered Production for that Settlement). Assign all Settlers to Tasks, or Relocate them to another Settlement (“Move” them), if there are no Jobs/Tasks for them to do.

    3. Go back to the Station/Shop/Building that you want to Assign the Settler to, and highlight it by looking directly at it. Then click the ACTION button to ASSIGN the Settler you just started COMMANDing, to ‘utilize this Station’ (in this example, the Scavenging Station, shown below).

    4. After clicking ASSIGN on a Station/Shop/Building, the ‘person icon’ should change from Red to Green, to show that a person is now assigned to the Station/Shop/Building (for example, the ‘Requirement for the Station to function’ is fulfilled). You should also see a message in the upper-left saying, “This resource is now assigned.” – that’s it! In this example, you have now Assigned a Settler to the Scavenging Station.

    5. If you go back to the Settler, you can check to make sure they are properly Assigned, by looking at them directly in Workshop Mode. They should now show the Task they are Assigned to (in this example, the Settler now shows a “Scavenging Station Icon” (a Buzzard, ‘the scavenger bird’)).

    Perform the above steps whenever you want to Assign a Settler to any Work Station, Guard Post, Shop or Store – the steps are the same, no matter what you need to have Assigned.

    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

    Example of a Crafting Station, which allows you to create or modify items in the game. This is a Weapons Workbench (from Sanctuary), used to Modify found Weapons, adding higher capacity, faster firing rates, more powerful scopes, and more.
    (Click to see Full Size)


    Starting out with Weapons (Similar Concept to Armor, Below)

    In the beginning, other than the best Weapons you can save for yourself to use (or share with your Companion), SCRAP the rest for Materials…

    Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Weapons to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Weapons you find and improve them as you Unlock Perks with your Points (using the Blacksmith skill) – it will also let you find other parts/materials as you ‘break down’ the Weapons you find into typical weapon-type-materials like Steel, Wood, Plastic and Screws – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

    Example of a Crafting Station, that allows you to create or modify items in the game. This is an Armor Workbench (from Sanctuary, seen in the rain), used to Modify found Armor, adding bonuses like more defense (adding more material to armor), or putting pockets in it (to allow you carry more weight), and more.
    (Click to see Full Size)




    Starting out with Armor (Similar Concept to Weapons, Above)

    In the beginning, other than the best Armor you can save for yourself to use, (or share with your Companion), SCRAP the rest for Materials…

    Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Armor to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Armor you find and improve them as you Unlock Perks with your Points (using the Armorer skill) – it will also let you find other parts/materials, as you ‘break down’ the Armor you find into typical armor-type-materials like Rubber, Cloth, Leather and Steel – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

    Short Story/Example About Armor: Because I could Modify and Customize Raider Arm armor near the beginning, I gave up the higher-protection “DC Guard Left/Right Arm” armor pieces that I picked off of a poor dead DC Guard, [because it does not seem to Modify-able in the game and] because I ‘knew how to Modify’ the Raider Armor to be POCKETED for higher Inventory/Carry space [you need to ‘learn how’, by putting Perk Points (‘skill points earned every Level’) into Armorer, a Strength 3 skill]. I put the DC Guard Armor in a Dresser at the beginning for the time being, using the ‘Pocketed Raider Arms’ I could Modify, then – a higher Carry Weight Limit is a valuable commodity – especially at the beginning!


    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

    Did someone say CHEATS?

    Sick of trudging around The Commonwealth like a Brahmin with two heads cut off, looking for junk to break down into materials to ‘just build’ with? Tired of picking up every piece of Junk you find, trekking in and out of town constantly and thinking “I just want to build up my base…” or “can’t there be an easy way of getting junk” or “there’s gotta be a faster way to get junk”..?


    Then wonder/wander no more – there is a way to instantly get all the materials you want!

    In Fallout 4 [and most Bethesda games], you can type the item you want and how many you want, of any item in the game, into the Command Console. However, you need to know the item’s Unique Identification Number, first (known as the “Base ID” of the item, in Bethesda games). 

    One way to find the Base ID of any item or object in Fallout 4, is to open the Console (by hitting the Tilde key, “~”, usually found next to the Number 1, in the line of numbers across the top of QWERTY keyboards), and clicking on the item or object in the game. It will then show the BaseID of the object at the top/center of the Command Console area.
    For an example; if you wanted to find out the Base ID of that Deathclaw running at you (and since we are in the ‘Cheat Section’ of this article, say… you want to kill it instantly), then you would find out the ID for it by opening the Console (“~”) and clicking once on the Deathclaw (it should be ‘frozen’ by opening the Console), which would show the BaseID of it just below, at the top of the Console area. Now, for this example of ‘killing it instantly’; you just have to type in “kill”, then a space, then type in the BaseID you see on the screen, and hit Enter. BOOM. That Deathclaw that was running at you (and you were unprepared for, full of inventory and unable to run, no doubt)? It’s dead. “First Crack At The Gear!” 

    [Note1: If you try ‘clicking on the enemy, then typing KILL, then just hitting ENTER’ right away; it may not work as desired. You may end up killing yourself… Although those steps do work, they do not seem to work 100% of the time [in my testing], therefore, the Suggestion of doing the steps from just a bit above (“clicking to get the ID, but typing in KILL and the ID number”), is recommended – to save from accidentally killing yourself and having to LOAD…]

    [Note2: The BaseID seems to change [in my testing], as in, when a Deathclaw (from our example above) ‘spawns’ (comes out of the ground), it will have one ID (and it seems to be ‘unkillable’ for a short time), and then when it starts to come at you and attack, it will change to another ID – which can then be used in the Command Console to ‘kill’ it. Also, Base Identifiers may be ‘Procedurally Generated’, which is, automatically and repeatedly created and changed, as a game goes on. Although this does not seem to happen for items like Food and Materials, it does seem to happen with Enemies and Gear (Weapons/Armor) – so be sure to take the steps above when trying to manipulate objects around you (eg. ‘kill’-ing an enemy), finding the BaseID each time, to be sure that there will not be a mistake or missed opportunity, to utilize the BaseID in the Console.]

    Want nearly-infinite food?
    Want nearly-infinite materials to build with?
    Want to ‘just build and not worry about going around collecting Junk (to build with)’? 

    Then wonder/wander no more – here is a way to instantly get all the building materials you want!


    [WARNING/Suggestion: Although getting all of the items you could ever want, whenever you want, to ‘Just Build’ – effectively turning the game into “Fallout 4: The Sims Apocalypse” where you just Build and Decorate and work on keeping your Settlers at bases Happy (not that that’s a bad thing) – it can potentially contribute to making the game ‘less exciting’, as it takes away much of the need to go anywhere or do anything (other than keep your Settlers’ Happiness maintained). This isn’t a bad thing necessarily (I have one Character I created just to play around and learn the Build Mechanics with and have fun just building and decorating..). I only mention this because I would like to Suggest to create a separate Character to do this with, or remember that when the game ‘gets kind of boring’, to create a Character where you ‘don’t cheat at all’, to create suspense/tension within the game. No matter how you prefer to play though, I hope you enjoy Fallout 4 as much as I have – and still do… Have fun!]

    I have some Batch Files for Fallout 4 below, which will allow you to ‘type in to the Console what you want’ [Materials to build with, or Food (so you won’t have to worry about Farming or feeding your Settlers)] and you will instantly have a ton of those items on your character.
    With the Items in them listed in Alphabetical Order, I have one file that is for getting Materials (Scrap/Junk to Build with), one file that is for getting Food (to Eat/Cook with) and one that is for getting huge amounts of both in one shot…

    To use these Batch Files in Fallout 4, simply download the Text file(s) and place them into the Fallout 4 game directory/folder, where the game data/files are.
    [Don’t worry, they are just Text Files, but I give directions on how to make your own further down, if you ‘don’t like to download things unknown very much’.]


    To quickly find the Fallout 4 game files location [in Steam, on PC]:

    Go to the Library section in Steam and Right-Click on the “Fallout 4” listing, choosing ‘Properties’.

    In the Properties window that comes up, click on the ‘Local Files’ tab.

    It shows you what Drive the game is on; but to quickly get to the game files themselves, click on the ‘Browse Local Files’ button, which will open a new File Explorer window (Windows).

    This location is where you want to Save the Text Files to (the ‘Batch Files for Fallout 4’), usually it will have a Path like “SteamLibrarysteamappscommonFallout 4” on whatever Drive/Partition you installed the game to.

    In that folder, Download/Save (or ‘Paste’, if you ‘Copied’ the files from another location) the .TXT files, to be able to call them up from the Command Console in-game. 

    Example of how the ‘Batch Files’ (Text Files) look, after being placed in the Fallout 4 Game Folder
    (Click to see Full Size)
    Here are the steps to use the .TXT-format ‘Batch Files’ once they are in the game directory (shown for the file for getting Food, the file for getting Building Materials, and then the file for getting Huge Amounts Of Everything To ‘Just Build’ if you want...):

    1A. To use the file that gives you 1000 of all types of Food (so you don’t have to worry about Farming or Feeding your Settlers for a long time); type in

     bat allbasefood

     in the Command Console and hit Enter. That’s it!  

    1B. You can now close the Console and you’ll find you have 1000 of every type of Food in the game, on your person.

    1C. Go to a Workshop to Store the Food there (otherwise you will be ‘overburdened’ with all of that Food in your pockets) – you will find the Food items under the AID section in your Pip-Boy, as shown below:

    2A. To use the file that gives you 1000 of all types of Materials to build with (all of the Crafting Components, so you don’t have to worry about going out and looking for and collecting Junk items to Scrap for a long time and can ‘Just Build’, if you want to play that way for a while); type in

    bat allbasematerials

     in the Command Console and hit Enter. That’s it! 

    2B. You can now close the Console and you’ll find you have 1000 of every type of Building and Crafting Material in the game, on your person.

    2C. Go to a Workshop to Store the Materials in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Crafting Components in your pockets) – you can just hit the STORE ALL JUNK button, to do it in one step.

    For the last one, which gives 9001 of every single type of Food AND Crafting Component in the game [maybe I should have named it “IJUSTWANTTOBUILD.txt”], use the steps below:

    3A. To use the file that gives you 9001 Of All Types Of Everything To ‘Just Build’ With (all of the Crafting Components in the game, so you don’t have to worry about going out and looking for and collecting Food OR Junk items to Scrap, for a long time and can ‘Just Build’); type in

     bat allyourbase9k

    in the Command Console and hit Enter. That’s it! 

    3B. You can now close the Console and you’ll find you have 9001 of every type of Building and Crafting Material in the game, on your person.

    3C. Go to a Workshop to Store the Junk Items (Materials) and the Food (from the AID section in the Pip-Boy), in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Every Frelling Thing In The Game For Settlement Building in your pockets).  

    Here is where to Download the Text Files to place into the Fallout 4 directory/folder (the ‘Batch Files’ to use), from the GoogleDrive for The Blog:

    allbasefood.txt file
    allbasematerials.txt file
    allyourbase9k.txt file

    If you don’t like to normally Download things ‘from unknown places/people’ [aren’t we just ‘Friends That Haven’t Met Yet, though, my dear reader?], here is what the Google Drive link looks like when you click on it:

    Still, feel free to Scan the files with your installed Anti-Virus Program(s), or online through something like Virustotal.com (this is actually a good idea to do with anything Downloaded..).

    If you you rather create your own Text Files, to place into your Fallout 4 directory/folder, to run as ‘Batch Files’, to give yourself an amount of these items, instead of fully Downloading the Text Files offered above – then here are the steps to create your own files:

    Is There A Way To Build More, Past The Limit?

    Sadly, there is a limit to how much you can Build in a Settlement – indicated by the SIZE bar in the Upper-Right corner of the screen in Workshop Mode. While this limitation is there to stop us from building so much that it makes the game go down to 1fps in that area, the SIZE limit is pretty conservative [in my opinion] and I found out that there is an easy way to ‘Build More’ – getting past that Build Size Limitation….

    When you see the message, “Nothing More Can Be Built.”, you can just press your lips together and blow, making that weird trumpet sound, after reading the steps below. No Limitations for you! Just follow these steps and you can continue to Build in that Settlement:

    (Note that this is not a Cheat, it does not affect Achievements and it is doable on Console as well as PC)

    • Get some Weapons together on your Character (specifically Guns, as this specific technique does not appear to work with Melee or Thrown in my testing). Apparel and Junk does not work for this either.
    • Bring up the Pip-Boy and Drop the Guns on the ground
    • Close the Pip-Boy and enter Workshop Mode (by Activating the Workshop Bench or holding ‘V’ (on PC) to open Workshop Mode)
    • Look down at the Guns on the ground and STORE them in the Workshop Inventory (careful not to SCRAP them, that is not what we are doing here at the moment!)
    • You should now see your SIZE bar going in reverse and it will even change from Red to Yellow to Green. BOOM. More Room To Bloom. 

    That’s it! You can now build more in that Settlement. Enjoy! If you want to retrieve your Weapons, you can just go into the Workshop Inventory (“Transfer”) and get them back – which means you can repeat these steps over and over, as needed! (Don’t forget to Share your Screenshots on Steam or elsewhere – other people want to see what you can do – and it gives them new ideas, too)

    Although it is possible to get past the Build Limit by simply dropping ‘any item’ and Scrapping it [I recently learned this on the Steam Forum for Fallout 4], this is still not what I was trying to do, with the Steps above. My intention was to STORE the Guns, so that they can still be utilized later – selling them for Bottlecaps, or ‘Breaking Them Down’ and taking their Modifications off to use on other Weapons, or just using them as Weapons in the game on the Character (or given to Settlers to help them fight off Raids/Attackers) –  that is why the Steps above utilize my method. Storing the Guns allows you to continue to use them (as opposed to Scrapping them into Components to Build/Craft with).



    [……I am going to add to this post, as I remember things that I already have forgotten and can’t seem to bring back up at the moment to throw in here; but I still hope someone finds these concepts and Tips helpful, for either starting out in the game or improving your Settlements (there are more advanced concepts to come….. Have fun with Fallout 4!]

    Berberine – for Cancer Prevention, Anxiety, Depression, Increased Fat Burning, and More!

    Berberine – for Cancer Prevention, Anxiety, Depression, Increased fat burning, and more!

    Berberine is a yellow alkaloid found in several plants/herbs such as goldenseal and phellodendron.   It is a powerful plant chemical with proven antibacterial, anti-inflammatory, anti-diabetic, anti-cancer, and immune enhancing properties.    Herbs containing berberine have a long history of effective use and there is considerable science backing these uses.
    It is also extremely helpful for treatment of seasonal allergies traveler’s diarrhea, food poisoning, and as an oral hypoglycemic for Type 2 diabetes.

    As per Dr. Michael Murray Berberine has been shown to: 
    • Produce results in clinical trials in improving Type 2 diabetes on par or better than conventional drugs including metformin.
    • Improve blood lipid levels better than statins.
    • Lower blood pressure in many subjects as well as any class of antihypertensive medication.
    • Improve liver function and promote anti-obesity effects.
    • Exert significant beneficial effects on digestive health and the microbiome.
    • Produce very encouraging experimental data in a wide range of modern health issues including cancer, Alzheimer’s disease, Parkinson’s disease and others.
    How does Berberine work?

    Berberine activates adenosine monophosphate-activated protein kinase (AMPK).  AMPK is sometimes referred to as a “metabolic master switch” because it plays an important role in regulating metabolism.

    AMPK causes a cascade of effects within cells involved with maintaining energy homeostasis.  AMPK helps shift energy towards cellular repair and maintenance.   It has many of the same effects as increasing exercise while at the same time restricting caloric intake.

    Other benefits of Berberine include:
    • Slowing the release of free fatty acids to help prevent harmful fat deposits
    • Promoting insulin, leptin, and adiponectin function for a healthy metabolism
    • Supporting healthy blood sugar levels already in the normal range
    • Promoting healthy insulin sensitivity
    • Promoting healthy gut microflora
    • Supporting healthy lipid metabolism
    • Stimulating the release of nitric oxide for healthy blood flow
    Berberine Helps Ease Anxiety and Depression

    Another benefit of AMPK is that it protects neurons and increases key neurotransmitters which improves brain function and psychological well-being.  So, it should not be surprising that several studies have shown that Berberine is very useful for anxiety and depression.

    Berberine and Cancer Prevention

    Berberine slows cancer growth and causes cancer cell death through a variety of mechanisms: tumor cell apoptosis and cell cycle arrest, inhibits blood vessel growth to tumors, inhibition of tumor cellular invasion and metastases (spread), etc.
    One of the main anti-cancer targets that is inhibited by berberine is NF-kappa B. NF-kappa B is one of the most important proteins in our cells, acting as a key switch in the development and progression of inflammation and cancer.
    ·       Cancer (and precancerous cells) often have a permanently activated NF-kappa B, which keeps the cells proliferating and prevents them from dying (apoptosis.)
    ·       Chronic inflammation can also be a result of activated NF-kappa B, and we know that chronic inflammation can lead to cancer growth
    ·       Additionally, Berberine sensitizes cancer cells to the effects of radiation but NOT of normal cells. So Berberine may make radiation therapy more effective. 

    Berberine also inhibits the tendency of cancer cells to become drug resistant over time by inhibiting the cellular membrane proteins that pump drugs out of the cell. When Berberine is taken with numerous chemotherapy drugs, studies have shown that they work synergistically to fight cancer.
    Contraindications for Berberine

    ·       Displaces bilirubin and should not be administered to jaundiced neonates (may increase bilirubin levels due to displacement of bilirubin from albumin)
    ·       May cause a prolonged QT (a variable in cardiac electrical conduction) in patients with underlying heart disease
    Drug Interactions

    While Berberine is quite safe and well-tolerated, it may be contraindicated if you’re taking medications.  For example, Berberine may hinder absorption of tetracycline and other similar antibiotics, rendering them ineffective. Also, because Berberine significantly inhibits CYP3A enzymes — enzymes needed to metabolize most drugs — it can lower the clearance of medications, which in turn can augment their effect. This can lead to overdose, the risks of which will vary depending on the drug in question.

    Berberine increases the effects of drugs that lower blood sugar so it is critical that you not mix Berberine with these drugs unless under the supervision of a physician.  IT is important to note that Berberine produces all the benefits of Metformin with much lower risks!

    Sources of Berberine

    Berberine is available as an isolated supplement OR through certain herbs such as goldenseal or Phellodendron.    Nexrutine is a patented Phellodendron Extract with high levels of Berberine that is particularly effective at reducing joint pain, improving mood, and reducing prostate inflammation and likely prostate cancer risk.   Phellodendron also has has a long history of being used to treat prostate inflammation and prostatitis.

    Multi-Protocol Label Switching (MPLS) continue…

    Adding a Label

    MPLS is a method that takes the best of both worlds and creates a concept that allows IP packets to travel through the network as if IP were a connection-oriented protocol (which it isn’t). Using special routers called Label Switching Routers (LSRs) does this. These routers connect a traditional IP network to an MPLS network. A packet enters the MPLS network through an ingress LSR, which attaches a label to the packet, and exits the MPLS switched network through an egress LSR. The ingress LSR is the router that performs the necessary processing to determine the path a packet will need to take through the switched network. This can be done using traditional routing protocols such as OSPF. The path is identified by the label that the ingress router attaches to the packet. As you can see, the ingress router must perform the traditional role that a router fills. It must perform a lookup in the routing table and decide to which network the packet needs to be sent for eventual delivery to the host computer.

    Internet 2010

    However, as the packet passes through the switched network, it is only necessary for the switch to take a quick look at the label to make a decision on which port to output the packet. A table called the Label Information Base (LIB) is used in a manner similar to a routing table to determine the correct port based on the packet’s label information. The switch doesn’t perform IP header processing, looking at the IP address, the TTL value, and so on. It just spends a small amount of time doing a lookup of the label in the table and outputting the packet on the correct port.

    When the packet reaches the egress LSR, the label is removed by the router, and then the IP packet is processed in the normal manner by traditional routers on the destination network.

    If this sounds like a simple concept, that’s because it is. MPLS still is in the development stages, so you’ll find that different vendors implement it in different ways. Several Internet draft documents attempt to create a standard for MPLS. Other features, such as Quality of Service (QoS) and traffic management techniques, are being developed to make MPLS a long-term solution.

    Using Frame Relay and ATM with MPLS

    One of the best features about the current design of MPLS is that it separates the label-switching concept from the underlying technology. That is, you don’t have to build special switches that are meant for just MPLS networks. MPLS doesn’t care what the underlying transport is. It is concerned only with setting up a path and reducing the amount of processing a packet takes as it travels through the circuit.

    Because of this, it’s a simple matter for an ATM or Frame Relay switch vendor to reprogram or upgrade its product line to use MPLS. For ATM switches, the VPI (virtual path identifier) and VCI (virtual channel identifier) fields in the ATM cell are used for the Label field. In Frame Relay switches, an extra field is added to the IP header to store the label. However, don’t get confused and think that an MPLS network is an ATM network or a Frame Relay network. These switches must be reprogrammed to understand the label concept. It’s even possible, for example, for an ATM switch to switch both ATM and MPLS traffic at the same time. By allowing for the continued use of existing equipment (and

    these switches are not inexpensive items), large ISPs or network providers can leverage their current investment, while preparing to install newer MPLS equipment when the standards evolve to a stage that makes it a good investment.

    For the long term it’s most likely that MPLS will be implemented using technology similar to Frame Relay instead of ATM. This is because of the small cell size of the ATM cell (53 bytes) combined with a high overhead (the 5-byte cell header). In a small network with little traffic, this 5-byte cell header seems insignificant. However, when you scale this to large bandwidth network pipes, this amount of overhead consumes a large amount of bandwidth given the small amount of data carried in the 53- byte cell. Thus, variable-length frames are most likely to become the basis for MPLS networks in the next few years.

    The Elder Scrolls Online – “PatchManifestError” In TESO Launcher [Workaround]


    [Text-Only – This post is initially Text-Only, to allow posting this as fast as possible, to help others.
    I may return and add additional graphics/screenshots pertaining to the article… Soon™]


    Just now, I ran into an issue starting up TESO, where the Launcher gave an error message – oddly, it was slightly different than the message my Gamer Wife beside me got – one of us got “Error 210” while the other got “Error 206”. Here is an example of what the Error Message within the TESO Client Launcher looks like:



    Popping into the Steam forum and the Official Bethesda/Zenimax Forum for the game, I saw a number of people mentioning they are getting this too, just today, like me. So, I wanted to come here and post a ‘quick fix’ that can get past the error message and allow fellow gamers, like me, to be able to play the game as quickly as right now, tonight [actually it’s more of a ‘workaround’ than a true ‘fix’, as it doesn’t solve whatever issue is happening with the Launcher/Client/Servers… I will post this as a “Workaround”].

    Similar to an earlier issue with the TESO Launcher I talked about here at The Blog, the ‘workaround’ involves bypassing the Launcher itself and starting up the game manually via the Executable files… The instructions to do this are below.

    For the Steam Version of TESO:

    • Open Steam
    • Right-Click on TESO in the Library and choose Properties
    • Click on the “Local Files” tab
    • Click on the “Browse Local Files” button to show the directory/folder of the game
    • Navigate into THE ELDER SCROLLS ONLINE > GAME > CLIENT folder
    • Double-Click on “eso64.exe” to launch the game (or “eso.exe” if running 32-bit Windows/Game

      For the Standalone Version of TESO:

      • Right-Click on the Shortcut (the icon that runs the game) on the Desktop (or in the Start Menu) for TESO and choose Properties
      • Click on the “Open File Location” button in the Properties of the game shortcut
      • You should find yourself in a Windows Explorer windows, looking at the “Launcher” folder of Zenimax Online
      • Go up one folder level to “Zenimax Online” (click on the Zenimax Online folder in Explorer)
      • Navigate into THE ELDER SCROLLS ONLINE > GAME > CLIENT folder
      • Double-Click on “eso64.exe” to launch the game (or “eso.exe” if running 32-bit Windows/Game)
        That’s it! Now the game should start up and you will just have to Login within the game itself.

        Unfortunately, I do not know what has caused this error, and I have not seen any Official Postings by Bethesda/Zenimax to explain it, as of the time of this writing. Although it appears to be some sort of Server/Launcher error, I cannot say specifically at this time. However, having testing this Workaround on different machines and with both the Steam Version of TESO and the Standalone/Web version of TESO, I can safely say that this should work for you, fellow gamer.

        Hopefully that helps – and See You In The Game!

        Carbohydrates, good or bad for dieting

        Another distinction that some nutritional counselors make is between refined and unrefined carbohydrates. In dieting index weight loss, we prefer to classify carbohydrates as low-, medium-, or high-dieting. However, because you’re bound to hear carbohydrates defined as refined and unrefined, this section discusses how the terminology relates to the dieting index.

        Refined carbohydrates are more highly processed than unrefined carbohydrates. Processing includes such activities as cooking, milling, and separating the whole food into parts. Examples of refined carbohydrates are white bread, white rice, most packaged breakfast cereals, donuts, cakes, cookies, bagels, fruit and vegetable juices, fruit drinks, soda, and candy. The list goes on. Refined carbs are usually high-dieting, but some can be low, as in vegetable juice and some fruit juices.

        Diet Start

        Unrefined carbohydrates are those kept in their natural state. In general, the unrefined carbohydrates tend to contain more fiber. Examples of unrefined carbohydrates are whole vegetables and fruit, whole grains, dried peas and beans, and nuts and seeds. Some foods are processed more than others. For example, fruit juice is not processed as much as fruit drinks. Usually unrefined carbs are low-dieting, but not always, so be sure to check the dieting index listings before you eat them.

        Pastas

        Even though regular pasta is a highly refined, processed carbohydrate, its dieting value can be low, medium, or high, depending on how you cook it. If you cook spaghetti for only 5 to 6 minutes, its low-dieting. Other types of pasta may need slightly more or less cooking time. If you open a can of prepared spaghetti in sauce, those noodles will have a higher dieting index because they’re mushy.

        Cook pasta just until it softens and you’ll be eating a healthier meal. The longer pasta is cooked the more available the starch in the pasta is for quick digestion—exactly what you don’t want.

        The Good and the Bad

        Carbohydrates aren’t good or bad; the difference is in how you eat them and how much of them you eat. This is one of the reasons why dieting index weight loss works so well. You don’t need to give up your favorite treat food, whether it’s white bread, bagels, or candy bars. But you do need to eat them in such a way that you don’t cause a quick rise in your blood sugar levels, and you do need to watch portion sizes.

        The dieting index gives you a way of managing your blood sugar and insulin levels, thus assuring that you aren’t storing fat and also that you continue to lose weight.

        One way to do this is to manage your dieting load by meal and by day. You’ll be balancing the low-dieting foods with some high and some medium, and overall, you can keep your insulin levels low.

        Now’s the time to give up the notion of bad and good carbs and of fattening and nonfattening carbs. Instead, accept all carbs as okay, based on how you eat them.

        Giveaway Winner!

        I had so much fun seeing what everyone posted in the Teacher Toolbox Trio linky. Thanks to everyone who linked up.

        I went to the Random Number Generator this morning, and drumroll…

        I’m excited to announce that Stephanie Ann from Sparkling in Kindergarten was the winner of the $25 Teachers Pay Teachers gift certificate. Congratulations, Stephanie Ann!

        And welcome to all of my new followers! I have lots that I look forward to sharing this summer.

        Have a great weekend!

        In One Sentence™ – A Battlefield Hardline Main Weapons Overview [Very Short Reviews Of Each, Currently Text-Only]

        [In light of the DOUBLE XP EVENT going on right now for Hardline, I wanted to get this hopefully-helpful information up right away for everyone – so here it is without any Screenshots yet – I am collecting some together and plan to place them in-line within, Soon™]

        In One Sentence™


        A Battlefield Hardline

        Main Weapons Overview


        By: The Game Tips And More Blog


        Presented in a Document-sorta-but-not-really format

        I was in the Battlefield Hardline Beta, but didn’t write about it at the time [and have only played off and on since then ‘for fun’ – that is, not really getting into collecting information for others, that they could use – well, other than one Introduction To The Sabotage Gadget tutorial I did quickly a while back… I wish I did more, but I wasn’t feeling up to it, sorry all..].


        Recently, I was testing out Origin Access (signing up for one Month, to see if you ‘lose’ things you have Unlocked/Earned after Cancelling the Subscription – which I will write about once it expires) and I have been playing a bit more as well [as I can], wanting to go through each Weapon in Hardline and give a really short ‘Review’ of each, to give everyone a Basic Overview of them – I dubbed these ‘mini-reviews’ the highly-creative-and-original “In One Sentence”™!

        Here then, is a listing of all of the ‘main’ weapons in the game, that is, the Primary (eg. Rifles) and Secondary (eg. Pistols), the Thrown (eg. Grenades) and Melee (eg. Knives) categories, with a one-sentence ‘review’ of every single one of them – at least for all of the ones I have Unlocked and have available since starting Origin Access [which opened up all of the Expansion Weapons – there are only about 3-4 types missing out of all of them now… I may ‘tweak’ the descriptions over the next little while but other than small phrasing changes and adding Images later, this is the list, ready to go.]

        The list itself is divided into the Classes available in the game, listing all Primary and Secondary weapons available to that class to Purchase and Use, roughly as they appear on the in-game Menu Lists, with the Thrown and Melee weapon categories at the end. As such, there are some overlap/duplicated entries when written in Text form (eg. a pistol found in the Professional list will also be listed in the Operator list, if they both can use them, with the same or nearly the same Review/Overview for each listing). This way though, you can just skip to the Class section you are interested in playing and see the Weapons as they appear in the game, not having to worry about searching for the Weapon name itself.

        I would like to do the Gadgets (Class Special Tools) as well, sometime in the future – but for now, enjoy these little summaries of the Main Weapons available, to give you an idea of them if you are a newer player, or to help you in finding something that fits your playstyle (eg. perhaps you want a ‘slow and hard-hitting’ weapon or perhaps you prefer a ‘fast-shooting with lighter damage’ one, and so on) – hopefully this information will help you out in some way, especially if you are new to Hardline (I have already seen an influx of new players since recent EA/Origin Sales, which is great to see). Enjoy, dear reader, and get in there for the Double XP Event on now – and See You In The Game!

        Rating Key (if applicable to weapon, when used):

        ? = Not sure [yet] if they are Criminals-only or Cops-only usage

        * = Weapons I ‘Liked’ (fit my playstyle(s), is unique in some way)

        ** = Weapons that are A Personal Favourite (I use a lot or ‘mainly’ would use)

        Scout Elite